kubota bx23

WHICH TIRES COME STANDARD ON THE BX23? I HAVE NOTICED ONE DEALER HAS TURF TIRES ON THIS MACHINE. I WOULD THINK THE BAR TIRES,FOR BETTER TRACTION.ARE THE BAR TIRES MORE EXPENSIVE ???

BX23 - 100-hour appraisal After putting on 100 hour on the BX23 these are my thoughts: This is my first real tractor. I also have a Toro wheel horse used for mowing, leaf pick up, etc. I realize that this is a small tractor and I did not and do not expect it to do the work of a larger...

Bought the tractor and 5 days later, it arrived. Got it Saturday at noon, and had 10 hours on it by Sunday night. What a Great machine! Lifts more than I thought it would. I was thinking B7510 for the FEL capacity, but could not justify on my 3/4 acre lot, turns out I did not need it! I went...

An inexpensive and simple toolbox (see attachment). This is a rubbermaid bread container from Walmart that cost less than $4. I put a bushing that I had in my junk drawer into the hole in the loader and used a spring loaded anchor bolt to mount it. You could probably make the bushing by using...

Last night I took the mower deck off for the first time on my BX23. Given it was the first time it went pretty well. After disconnecting the drive shaft, I tried to turn it directly sideways to keep it out of the way while rolling the deck out from under the tractor. However, it won't go into...

Has anybody had any problems with the BX 23 bogging. The problem comes and goes. in the last 6 to 8 hours of running the machine this weekend. Yes I did add some fuel to the machine thats why I'm thinking it is bad fuel. My first thought was a dirty fuel filter or a bad batch of fuel. I have...

How does the cruise control work on the BX2230? And is it something that could be done on the BX23? I'm taking my BX23 to the dealer tomorrow to have the mower deck installed (finally came in on Friday), as well as the high output alternator and an engine block heater. Since one the of main...

Sure makes it Easy to clean

Well she took a liking to my baby so now I have to give her seat time to . And she is getting good at it to. Please Honey can I drive

The Woods GBC48 has a weight of 285 pounds and he GB48 has a weight in the low 400s. Is the GB48 too much for the BX to pull. The GB48 looks like it is also made better. I was quoted $420 for the GBC48, and I'm not sure if that's on the high side.

I recently sold my B6100E (with gear drive) and upgraded to a BX23. Now have 5 hours on the meter. Tonight, after fitting the PTO shaft for my tiller, I took it down the street (without the 3PH, but the tiller on the back). I noticed that there was a significant whining noise coming from the...

I was wondering if anyone has a cross reference from Kubota filters to Wix filters? I'd like to use Wix filters when I perform the 50 hour service. Thanks

Put together a new design for the brake light system will send pic of complete wiring set up . The light and brackets were from wal-mart and the wire and micro lever switch and connectors & screws are from radio shack. The color code of the wiring setup is important for the switch to work in...

Hello everyone. I just discovered TBN a couple of weeks ago when I started thinking about a new tractor. I've learned allot reading through many of the great posts so thanks to everyone and TBN. I started my tractor search by looking at the BX23 but have since mainly focused on slightly...

Anybody know what are the differences between a BX22 and BX23? I'm thinking of getting a used BX22, but don't want to miss any important new features of the BX23. I know in other posts the 4 position valve was mentioned, ? anything else? Thanks very much, George

I have a BX23 and am in the market for a PHD. All the subcompact version of the PHD only go down 30 inches (e.g. the LandPride PD10 and Woods PDH25), but I will need to go down below the frost line some time (42" to 48"). Would the next size up (the Landpride PD15 and Woods PDH35) work with a...

Just in case someone is interested. I saw this on ebay for the BX23 owners out there. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7502718700&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1 Bill

I see in some photos posted by you guys that you have canopies on your tractors. Is one available for my BX23? And if so, from where? Is installation by the "non-mechanically inclined" possible? Thanks.

Ok guys.... I want a rear blade for my BX23. The dealer says to stay at or below 60 inches wide. I would like one that tilts as well as swivels. Any help on who makes this type of annimal? Any other points of interest will be fabulous. Thanks

Just a quick note on my new BX23 I Love it I have waited two years for this Machine and it was worth it. Have a 1.0 acre 1/3 grass and 2/3 woods and that will change soon . The wife loves the Bx and it stays in the garage in front of my truck. We have a big Garage . I paid 14500.00 for the...

I am in the market for a 4 foot boxblade for the BX23. Looking for other BX23 owner's experience with the BB brand purchased. Also: did it attach easily without modifying product, cost and weight, etc. Your thoughts. I don't want to pick a brand and find it doesn't fit. Thanks

I am a long time reader of this forum, and really appreicate its candor. I am finally about to buy a BX23, and have found a really good deal with the local dealer, in Winnfield LA, and with 36m 0%, don't think I can really go wrong. What I would like to know is how strong the BH600 really is? I...

What a day! Temps hit the low 70's and the sun was just a-shineing away. A slight cool breeze hid the fact from me that I actually got alittle sunburn going on too With all this going on along with the grass starting to get out of hand left me with no choice but to dismount the FEL & BH...

Does anyone use a cover for the mid PTO on BX23? I removed the MMM for the first time and noticed the PTO is unprotected. Rear PTO has a nice cap/cover. Dealer said they weren't aware of any covers available from Kubota. Any help is appreciated.

I have seen a number of posts regarding lights and hooks. I received my BX23 this last weekend and have uploaded a couple photos of the lights and hooks that the dealer installed for me. So far so good.

What works best on the BX23? A Quick-Hitch? If so what brand and size? I have read that many are using Pat's Easy-Change on SCUTs. Thanks for your help.

Hello guys, sorry, had to post this just for kicks. I called my neighbor up the street on Saturday to ask him about the covenants for outbuildings in our neighborhood. I figured I would ask beings the new BX23 will be arriving the end of the month, I may need extra storage next summer...

BX23 \"TOP\" position of cutting height control Anybody got an idea how to free up the knob on the cutting height dial? Mine is cranky about going in and out of the TOP position. All other positions are smooth. I am doing this just like I did on my BX2200 with the lift at full height position...

Just to verify, if ever in the future I would want to sell my newly aquired BX23, I would represent it as a 2005 model to the buyer, right or wrong? I know the tractor was shipped new to the dealer in March of 2004 and I just bought it in March of 2005.

Just took delivery of a new BX23. I think I'll be very happy with it. I've learned a lot from this forum over the last few weeks. I’m in the market for PTO chipper, log splitter (tow behind) and an off road dump trailer to move material with tractor. I've seen a few good ideas here and there...

I don't know what's going on with my BX23 seat but the middle of it has started to come off. I showed it to my dealer and he didn't know what to do because the surface is perfectly fine. The problem is inside the seat. I only weight 200 lbs so this is not the problem. In my opinion, the...

For the past 20 years I have gotten by on an 18 HP garden tractor, but my to-do list is getting out of control - a 400ft driveway to repair, gas line to install, french drains to put in, drainage pipes to replace, well you get the idea. I started looking into the compact tractors and fell for...

I'm new on TBN and what I like here is to look at others rig. So in return, I took some pics of mine. You can see on the pic a snow blower (Pronovost)... 64 inches on a BX23. I know... it's a "little" too big for the tractor but if you use your head when you use it, it's OK. Last October when...

Just kindly soliciting comments from experience. The BX23 Owners manual states that no [internal] tire ballast be used ... only physical weights up front. That seems to preclude foam, et al. Anyone successfully loading front tires on a BX22 or 23, 1500, 22whatever, i.e., with a loader? And...

I'm going to change over to a synthetic Motor oil at 100 or so hours. Not sure which one at this time, but sythetic for sure. Question is do I have to flush any lines that you know of or is it just the simple drain, filter change? Thought about the HYDro synthetic change, but order a 2.5 gallon...

I am going ot the dealer that sells both, but thought I would look for a few heads up non salesman type info. How do these two compare in price, size and work ability. I know the 2310 has more HP, but that does not relate to lifting capacity. Did a search and surprised I could not find this...

Ok, well now that I am soon to be a new BX23 owner I have a few questions. I currently run Mobil 1 Delvac synthetic oil in my diesel pickup. At what point can I switch my BX over to Mobile 1 Delvac as well? Do I need to wait for the 50hr service and let the dino oil do it's thing or can I...

Hello, I am considering a TLB and was thinking about a BX23. My needs are for a "light" BH, but I want to move rock to make stone walls and regrade my property so I wanted a stronger FEL. What does rock weigh? Do I really need to lift 600lb over the 450lbs of the BX? I have looked at the...

At 12 hours on the hour meter,topped off the tank.took about 4 gallons,used about a gallon per 3 hours plowing and pushing back snow banks,at half throttle or so.dealer is having me use a 50percent kerosene mix to keep it from gelling,i have never heard of this.[its my first diesel]runs great...

Are there any choices for a hard cab for a BX23, other than the Laurin Eclipse? The Eclips looks great, albeit a little large, but I'm told it's also 5000 dollars! Does a Curtis cab work with the backhoe function? Or has anyone taken a Sims or Curtis and made it work? Thanks...Dave

Ok guys and gals, it is time for me to spring for that tractor that I have been wanting to purchase for quite some time. I am seriously thinking about the BX23. I got several prices on both and here is what I have: BX23 with bar and turfs, High-Cap Alternator, 60"MMM Dealership #1 - $17400...

I have a BX23 coming Saturday, needless to say, I am very excited, I have a couple questions: 1. I want to use the FEL to hoist things. Often hooks are welded or bolted to the top of buckets for this purpose. Can I do this with this machine? 2. With a set of ramps and the FEL and backhoe...

Hello fellow TBN'rs, I finally got some seat time this past weekend using the BX23's backhoe to remove seven 25' to 35' foot locus trees from my property. Getting a site ready to put in a new home for the BX23 (barn/shed). Sorry, but I forgot the camera. Anyway, when I attempted to reinstall...

BX23 won\'t start Folks, it is snowing like ****, and my BX23 is not turning over at all when try to start. I believe that the problem is lied in the safety circuitry. It could be either the PTO or the neutral switch. I would like to check these switches with a Volt meter, but very...

While at the parts counter at my local dealer, the tractor salesperson saw that I was picking up parts for a BX2200. We started talking and before long, he had me interested in the BX 23. (which I was already very interested in anyway) My BX2200 is an 02 model with 150hrs and has the FEL and...

Thinking ahead for next season I am considering either a front snow blade or front mounted blower for my BX23. I have been plowing this season with my Bolens HT23 with a 60" front blade and it seems to do satisfactory work. I have plowed 100' driveways with garage aprons with 12" snow in about...

After laboring this a lot, it seems the rear mount 3-point snowthrower is the way to go so that the loader can remain on the tractor - its handy with the snow too. Which one to get? I've looked at a few and think I'm about to step off a cliff and buy the Blizzard B54 (by RAD), with the...

The shop manual for the BX23 just says to "Inject grease with a hand grease gun". Does this mean a pneumatic grease gun is not recommended? Also - anyone have recommendations on the best grease to use? I picked up some Lucas X-tra - costs twice the average but half the Kubota price. Is...

I think this is obvious, but I'll ask anyways - Do you have to remove the front end loader, grill guard and engine cover in order to change the oil filter on the BX tractor - We got snow last night and I was too tired after work to look at it. Thanks

While moving firewood today with the BX23, (70 hours) I had the misfortune of driving a 2" diameter stick through one of the rear tires. Scared the S@#$ out of me when all the calcium came squirting out as the tire rotated. I don't think it is repairable. It's got a jagged hole that is 1.25"...

I am a new owner of a BX23 and really like the machine, except for one little thing: there is so little room between the tires' inside wall and the frame that I am constantly cleaning there (heavy, sticky, clay soil)... the linkage, hoses, and wiring are not going to take this punishment too...

I'm ready to have the 50 hr service on my bx23. In the kubota buying forum I have seen posts that show that the dealer included a "50 hr service kit" when they purchased their tractor. Does Kubota have a service kit (fluid/filters) for the first service or do you just buy everything...

Hello to all from central Illinois. After much reading, talking, e-mailing, private messages and tire kicking I became the owner of a BX23 with loader and hoe at 1045am today. I'm very pleased with the purchase and while I dont have any pics yet rest assured that the tires are now filthy...

Greetings, as all BX owners know, probably the only shortcoming of the BX series (well, to me anyway) is the lack of a toolbox. I guess when Kubota set out to make the 1st ever subCUT, they wanted to squeeze as much into as small a space as possible. This is a good thing in most all respects...

What length trailer do I need to transport a BX23 with the loader and Backhoe attached? What is the total length of the Tactor with Loader and Backhoe? I have a 6x12 landscape trailer now with 2 foot side mesh, dual axle (7000lbs). Just need to know if I need new tractor. Thanks for any...

Greetings. Discovered one evening that the stock headlites on the BX23 were just about useless w/a loaded FEL. Not to mention I had no lighting at all should I ever feel the need to do any digging or rear implement tote'n/working at night so faced with these delimna's I was faced with no other...

Working today making a road across a slope. Loaded the bucket and reversed whilst turning so I could tip the dirt off the edge of the road. Hit a rock with the front wheel and bounced. Next instant the BX23 was on its side with me still in the seat. Thanks to the seatbelt and rops I was unhurt...

Woke up this morning to almost whiteout conditions and about 20" of snow on the ground. It didn't stop falling until about 3:00 this afternoon. Once the snow stopped I got out the BX23 and started in on clearing up the snow. I keep the tractor in one of those temporary garage structures in my...

I asked on a previous post how do you float the FEL and one user was kind enough to explain, but I still don't understand. I control the FEL and bucket with a joystick type lever. There must be another lever or value beside this normal FEL lever. I do not understand where the valve is. Can a...

I received a quote of $16,800 for a new BX 23 with a 60 inch cutting deck. Is this a decent price? I am supposed to finalize the deal on Thursday. Thanks for any input. Jim ab4d@aol.com

Was wondering what exactly can you use a box scraper for and what can't you do with it. What do they roughly cost? Anyone's experience. Are they like a tiller except not as deep..how deep do they go. Is there a model/size recommended for the BX23 Thanks BX23 - 17 hours

I have a BX23 and the temp gauge backlight is green while fuel gauge is white. Is this intentional or did someone at the assembly plant make a mistake? Thanks.

Greetings, after running the BX23 approx 12 hrs since delivery, I thought I'd post my assessment of it thus far. Altho it will be somewhat biased I'll try to keep it subjective. Prelude. My property is a tale of differing terrains. Approx an acre of flat lawn out front is for appearance while...

Greetings, Finally took delivery of the 60" MMM. I didn't want to wait until next year for delivery so I went & picked it up during lunch today. The crate took up all of 45" of the available 48" between the wheelwells of my F150 but it did fit. After getting it home, I remembered I had sold my...

I got my bx23 this summer and have used it alot and was looking at dump trailers was wondering what length any one else was using 14' is getting a little long and i have to stay under 7,000 gtw fro my truck (trailer will probibly rated heavier though)

After hiring someone to dig a 250 ditch (and loosing the equiv of a down payment), we decided to get a tractor as a Christmas present. Still don't have a tractor because we can't make up our minds on size. If you read the Bio, you'll see a plot map of the property (incl grade markings). Had to...

Just bought an '04 BX23 last Saturday. Anybody out there have a posthole digger for theirs? What other implements do you have for yours? TIA, Matt

Any opinions on this cutter, on their catalog cover they have what seems to be a Bx 2230 pulling one. Are 48" cutters too big for the BX23? Regards, Luis Leon

In the implement limitations section of the manual it states that the max weight for a rotary cutter is 300 lbs. and max cutting width is 42 inches. I don't want to abuse a machine I've invested so much in, how close to these specifications must I be? I've been looking at the Land Pride...

Well, I purchased it back in May and I finally got my pictures up. You can see them here - Our Tractor If you would like to see pictures of my family, the main site is http://www.porquinho.com

When I received my BX23 the mmm was attached. I see the back PTO has one, so I called my salesman to ask him to send me one, and he said there is no such thing. Is this true? I will be calling their parts department to confirm. regards, Luis L eon

owning-ML-533588-ML- brand specific post

When going up a hill and the engine conks out you go sailing to the bottom when you shift into neutral to restart it. Really scary! Has this ever happened to you?

As the sun started going down earlier I realized that what I really needed was some work lights on the back of my BX23. I wanted to be able to use the lights with the backhoe and with attachments mounted on the back of the tractor. I also wanted them to act as backup lights so I could see what I...

Hello, today I was removing the FEL and Backhoe and getting ready to install the front snowblower. I installed the quick hitch on the front which has two hydro-hoses (blue & read ring on them). Well, I attached the hoses by cap color, not the little ring color at first, and the quick hicth...

finally got some of my pictures scanned in and figured I would post a few. I got sick of manhandling the box blade and rear blade on and off of the 3pt so I bought a Speeco quick hitch and adapted everything over to use it. Then I made a 2" receiver adapter so I could tow my lawn roller. The...

Hello, Just got my B7800 back from a 50hr service and an altenator installed. The tractor is an awsome machine. I was using it the other day and realized that the float wasn't working and that when I gave it down pressure it would go then release. I guy that I work with has a bx23 and his...

Also gave a Cat 225 track hoe a hard time. The owner of the Cat said it would be no problem pulling it out, but when he was done, he said "that was really in there". At one point, the rear of the tracks came off the ground about a foot or so, so I guess it must have really been in there. I...

can anyone tell me what size shelter is needed for a bx23 the spec says its 44 inches wide. cant find the overall length with the hoe and loader attached. thanks in advance jim

Hello to all... I've been lurking and reading this board for a few weeks now and have decided to finally register. Anyway after a lot of research and reading and comparing on my part I've decided on the Kubota BX23. I was hoping if you gents who know more about these things would let me know...

I spent a good portion of the day using the backhoe to dig around an oak tree stump.- 14-18 inches wide and I have to say I'm wiped. I don't feel the FEL is of much use in this situation. I circled the stump by 3-4 feet deep with the BH and I don't see any sign of movement in the stump. Pull a...

Peace of mind question for BX23 greasing. I hope I haven't missed any, but by my count there are: 22 ftgs. on the backhoe 10 ftgs. on the loader 1 ftg. on the HST pedal Did I miss any?

Just finished the 10 hour lube and noted the instructions also mentioned lubricating the linkage. Is WD40 an option for this task? Is it best to access these areas by lifting the seat? Any other areas to consider lubricating while on the subject? Thanks in advance.

Greetings, Forgive me if this has been covered before, and pls correct me if newbies are to read a FAQ before posting (I didn't see anything like that, just don't want to brk protocol! :^) but here is my question: I just finished Muhammad's nice ebook, and even before finding it I have been...

When my BX23 was dropped off on Saturday, as part of my tractor review, I was instructed to grease the fittings where appropriate. My question is where can I buy the appropriate grease gun and what should I look for. What to look for to know it's time to apply grease. Thanks BXers

I would like to purchase a rake but have several questions. Should I go with a 48" or 60" rake? Also, whats the story with the guage wheels. I can save $190 if I dont get the wheels but the salesman highly reccomends them. Any advice would be greatly appriciated.

Arrived nice and early Saturday morning, with supplies. About a one hour demo, then tipped the driver $20. Got two hats. Put 2 hours on the new BX23. My first priority was to fullfill a promise I made to myself if I bought the BX23. For 10 years there has been a stump that every once in a while...

I bought a can of Kubota touch-up paint from my dealer, and it is much darker than the original paint. The BX23 is only a couple of weeks old so there is no fading and the can was well shaken. The paint is Kubota product #70000-73713 and is called Bright Orange II. Did the dealer give me the...

Thanks to all of your enthusiastic comments about the BX23 and checking them out at the dealer, I decided to soon purchase one myself. The dealer in San Diego quoted me a price of $16,000 for the BX23, $565 for the post hole auger and $120 for a "6 auger bit, and $570 for a gearmore box...

I recently traded-in my BX2200 for a BX23 and I noted the following last weekend when I attached my older snowblower to the BX23... Basically everything fit just fine with a couple of small exceptions. The underframe (can't remember p/n) that lifts/lowers the blower attached just like on the...

Tried to unhook the backhoe of my BX23 for the first time. Follwed the directions closely but I can not budge the mount lever forward to release the setpins. I lifted the tractor rear wheels with the boom as per instructions but still could not get the lever to move. I even varied the height...

Has anybody made a list of parts and (or) attachment list from all manufacturers that will fit the BX23 Marc Southern NH

Thank-you all for your input TBN people and Kubota users during the past week. I'm about to finalize my order with thoughts on the following accessories listed below. I have to say, it's amazing the range of attitudes from Kubota dealers. The dealer most local to me had the highest price, poor...

I'm planning on purchasing a Post hole digger. I talked to my Kubota dealer and he Quoted me a $850.00 price. Then on Ebay i found one for $399.00. I plan on limited use, so i thougth i might be able to save a few $$ anyone have any luck with one of these less expensive ones? Still...

Folks, I asked my dealer how much pressure should I put on my BX23's tires, but I don't like his answer too much, he didn't sound too sure, so I'm asking you folks out there. I always have the backhoe and and loader on. Thank you for your inputs. Alex

The dealer 3/4 hour away quoted identical to New Hampshire dealer. Will probably drive out this week to look at or the B2910. Dealer said price set by dealers.

Well, I'm back on the internet (almost) since I have internet access at work, but still don't have any access at home. I've been working on the yard alot, and have put about 16 hours on the BX23 since I took delivery on Thursday, 11 days ago. I took a bunch of pics, but the batteries in my...

Need a trailer to tow a BX23 and ZTR mower separately as needed to a close-by property. My question is what is the shortest or longest trailer that can be towed with a 1992 Ford 150 5.9liter pickup truck. Should I get a 16' double axle trailer with electric brakes (GVW7000) or 10' single axle...

BX2200 60\" MMM on a BX23 ? Hello, I'm thinking about trading-in or selling my BX2200 for a BX23; however, it's not clear to me at all whether or not my 60" mower (the Kubota model for it is something like BX27??) would fit the new BX23. Anybody know what the scoop on this is? TIA!

I’ve been lurking for a while and want to thank everyone for all of the helpful information they’ve posted in this forum. With your help, I think I’ve decided to buy a BX 23. I’m waiting on the sale of some stock to finalize, and when it does I’ll head off to my local dealer. I’m looking at...

I read an article on this site about an 3pt hitch attachment that would increase the lift height of the 3pt hitch attachments on the BX23. Has anyone tried one of these attachments and where did you purchase it from. Thank from New Hampshire.

Does anybody know about a grapple that will work on the BX23 front-end loader? I'm trying to figure out if I can work with this smaller tractor, but I think I need a grapple for all the brush and tree trunk clean-up.

I am a new member here. Not new to Tractors had a L2900 for the last 5 years. Have a case 1840 skid loader and a ZD28 to cut grass. Traded in the 2900 for a BX23. Wanted a smaller tractor to get around the house and had a need or want for a back hoe. Now I am thinking of moving snow. Live in...

I am totally new to tractors. (Not to mention a loader and Backhoe). Just spent 5 hours on my new BX23 getting used to the machine and starting an excavation for a new well line. All is going pretty good as long as I remember to release the parking brake, duh. I do have a few questions that...

Looking at one more alternative. I had settled on the L3130 with the LA723 loader and a scraper box. I also decided I can't afford the BH. I wondered if having the BH on the BX23 might make up for the smaller size of the '23 in felling trees (being able to tear up roots as opposed to just...

I'm intersested in buying a box scraper for my BX23, but I'm not sure what is the best size. The manual says max. size is 42" and 375 lbs, but 42" seems small. Does anyone have experience with a 48" or 60" box scraper on a BX? King Kutter makes a 48" weighing 350 lbs, and a 60" weighing 415 lbs...

Got a new BX23 on Thursday and have been playing, I mean working with it for a couple of days. This is my first tractor, and it is amazing, it does even more than I expected. Here's a picture of a CT pebble it pulled out yesterday. My question is, my driveway is about 450' long and I will...

Working away today and every time I went in reverse the BX23 coughed and tried to cut out. Took a time for me to realise that the down hill slope I was on was steep enough for me to come off the seat when I went backwards up the hill. You can't stop the BX although is scares me at times. I am...

Took the FEL and BH off for the first time today. I was very pleased with how simple it was. I have an old cement slab down by the pond. It's all grown over with grass but it gave me a perfect spot to let them sit for a day or 2 while I play with the MMM. Sure love the 23!!

Trying to decided between the two (before 0% interest runs out in a week), I like the pricing of the BX compared to the 2910 with similar implements, but have concerns about how much the BX loader can lift and its ground clearance. I don't know if I will need to lift more than 460 lbs, but you...

Spent almost 9 hours in the seat today digging ditches. The new property has some drainage issues that have not been addressed since 1973. The water was running everywhere this morning after 2 days of heavy rain. I can't tell you how impressed and happy I am with the performance of the 23...

There's seems to be a shortage of strainer pictures. I tried and failed to find some before my 50 hour service. All I found were peoples descriptions and the poor drawing in the owners manual. So during the course of my service I took some pics. I removed the left rear wheel (you don't have to)...

Well, after about 1.5 months of waiting, my Woods tiller is expected to be delivered, finally! Is there any information that you can share with me to make the first use go smoothly? My soil appears to contain numerous small stones, about 1/4 the size of ones fist. I'm a little worried that...

I've given up trying to find a used, inexpensive, compact tractor, in the local market, and have just decided to buy a new sub compact. I'm negotiating with four local dealers on a BX23, a TZ24D, 2210, and GC2310. My Kubota related question is: I have written quotes for $15,000 and $15,450...

This is the second time something has happened to my BX23 to put it out of commision since I got it just a few short weeks ago. Last time the bolt that holds the seat to the seatframe twisted right off , this time for some reason the tractor will not start. I currently have about 47.5 hours on...

here's a few bx23 pictures over the last two months.

Wow, what a great evening. Got 3 hours of seat time tonight. The Tractor now has 3.4 hours on it. I mowed a little grass with the 60" deck, dug out a small stump (I'm going to need a lot of time to learn the BH), hauled some firewood and dirt around in the FEL. My wife drove it around some...

My BX23 was delivered tonight right before the sky opened up with a downpour. I was able to drive it up to the gas station for it's first tank of Off-Road Diesel in the rain. (about 800 yards away through my Mother-in Laws yard). I think it is kinda appropriate that it was in the mud right off...

A while back there had been a post in the attachments forum about some cheap forklift forks on Ebay. This came at just the right time for me because I already had it in my head to build a pallet fork attachment for the FEL on my BX23 so I could use it to move lumber / building supplies etc as I...

I was excavating some rock out of this hillside to use in a retaining wall, when I began to get really hot. Realized that this secluded little area in the middle of our property would be an ideal place to cool off. So, as usual, I got sidetracked from the project at hand and went to work...

Hello to all. I have spent a lot of time reading everything on this forum about the BX23. After much research and your very informative discussions, my New BX23 will be delivered on Wednesday. My wife and I have 14.5 acres to maintain now and the Wheel Horse just won't do what I want. There...

I need to ask what kind of trailer, or setup do you use. My delema is this, I measure a 7.5 inch clearance from the hoe base plate to the earth. If I have to much incline onto a trailer I believe this will get into whatever the trailer is setting on. My dealer has 18' dovetail trailers with 3...

Well, actually it's the strainer tube, but it should be called a painer. It got to the point where I could no longer ignore the 50 hour service (anyone else here gone more than 10 hours over?), so I ordered all the stuff and got to it today. Draining the engine oil was a snap. Getting the...

I hope that I can explain my options in a way that can be understood. <font color="red"> My current setup </font> (1) Kubota B2910 w/ Kubota FEL & 72'MMM (2) Kubota B2150 w/ Kubota FEL & 72" rear discharge rear mower I do a lot of finish mowing, and want to have two tractors (his-n-hers), and...

I just clicked over 10 hours on my new BX23 and I noticed hydraulic fluid leaking from one of the hoses leading to the FEL. Can anyone give me a little guidance on how to determine which of the three lines is leaking and also how to stop the leak? I have not taken any of the hydraulic hoses...

I had just finished digging a big stump out of my backyard and had positioned the tractor to use the backhoe to get some of the dirt off the stump and as I was turning the seat around to the backhoe position I heard a snap and the thing came off in my hands. Turned out there was one bolt...

My wife was driving across the field when the right side of the mower deck droped to the ground. After assuring her that it wasn't her fault I went about finding the reason why. Very simply the "L pin" from the rear link popped out. Why did this pin just all of a sudden say to it's self "I'm...

This is my first post, but I have been lurking for a while. Last Friday I got myself a new BX23, 54" MMM, filled bar tires, hooks on the bucket... My wife mentioned to a friend that we got the tractor and they assumed we got it for my wife who recently got her PhD. Apparently it is a...

I started to notice some hydrolic leakage underneath the front axle today, looks like it came from the hub, possibly brake but not sure. I need the tractor now more than ever, can't wait ten days for repair from the dealer. Do you think I should have it repair right a way? the drop rate is...

First, I would like to thank this forum for supplying much needed information that assisted me in obtaining my new BX23. Second, I'm hoping someone can shed some light on the brakes that are on this tractor. My BX23 was delivered Friday afternoon and I have spent the past couple days playing...

Just got my new BX23 on friday the 2nd. Got it with 60" mowin' deck, snow blower and hydro assit plow, $20,000. Fair price I think thought not the best I've heard. However after putting 7 hrs on mowin', diggin' up stumps, taking away burn barrels and a few other things I don't much care what...

BX23 And World\'s Greatest Woman Here's a picture of my BX23 on its third real project - cleaning out our home's gray water & grease trap tank. Took all of 15 minutes to find the tank and excavate the top. The BH popped the concrete lid off without even straining. Dipped out about 50 gallons of...

Has anyone tried this yet? I am sure I am not the only one who has a desire for a more comfortable seat. Now that I have seen the BX23's seat I am thinking about changing over if they don't want too much for the new seat. Or has anyone found one that will fit w/o mods from a third party? (I...

Pat\'s Easy Change for BX23. Does it work? Been looking at the Pat's Easy Change for adding to my BX23. Looking for feedback (pro and con). The only attachment is a 42" mower that it would be used on. Also, when the BH is re-attached, would these get in the way when you have to retract the arms?

I plan on buying a BX23 this week - have gotten a number of quotes from dealers and and just trying to conclude my decision making process. I had been thinking of getting a toothbar for the FEL on the BX23 but had a couple of dealers say that it wouldn't help. I was thinking that the toothbar...

Can you guys get an 8'deep trench dug with the BT600? I know the brochure says you can get a 2' horizontal bottom at 6' deep, but I need to get down to 8' for a septic test pit, and don't want a 24" wide x 8' deep trench dug by a bigger machine, for safety reasons. My neighbor has a 9" bucket...

Hey all. hope someone can help with this. I have a Bx23 with 54" mmm I tried to adjust the deck and have been having a hard time. If I set the height dial to 3" my blades are exactly 3" from the ground With I sent it to 1" the left side is 1" and the right is somewhere around 3". If I sent it to...

I now have 17 hours on the machine. Continues to be an absoltue tank, and works hard. I decided to try removing the mid mount mower for the first time. I don't think Kubota could have made it much easier. All total about 5 minutes the first time. The ease of attaching the back hoe (5 min...

Have narrowed my tractor choice down to these two units. GC2310 @ $18,500 and BX23 @ 17,575. Plan on adding a mulching 54” deck to either one. 1+ acre cleared land/grass/yard with 1 80’ long incline 100’ wide at about 22 degree incline to mow. Another 1.5 acres of 20 year woods over old farmland...

I've been looking around for a used B series, but frankly, I'm having a hard time finding a good one locally. A few days ago I found this site and started reading up on the BX series. When I first saw them on Kubota's website, and in the equipment trader, etc, I thought they were just glorified...

Well, i get home from work today and am greeted to a completely re-arranged house. Nothing odd or bad...especially since I am not the furniture mover , but I see little orange flags in front of the house..???? Well my wife decided to have a Feng Shuei (sp.??) consultant come over to help the...

I became the proud Papa of a new bouncing 'Bota Bx23 last month! Just took off the 'hoe fo' the first time! Good thing I had my toes out of the way! I will get better with time...I hope. Ran into another problem though, with my 42" Rotary Mower. Well, it's new just like everything else, so I...

I removed the backhoe and loader for the first time last night. WOW, I don't think they could have made it any easier. I don't have a manual for the tractor yet...somehow mine was missing from my tractor and it's on order , but the removal of both attachments took a total of 12 minutes...

They drop off my new BX23 tomorrow and per the suggestions by many on this site I ordered an extra set of wheels and tires. I asked for bar turfs. I told them I wanted the turf tires on the tractor when delivered. They asked if they could follow up with the other set later when they came in...

Though I never asked any question, after reading through a years worth of posts with all the great advice given I've decided to get a BX23. It will be a little small for my needs now, but perfect for the long haul. It should be ready before next weekend. Included in the purchase will be the...

I have am considering a TLB - and really like the BX23, but I am concerned about its capability. Here is my situation: I own 3.25 acres - about 2/3 wooded. I don't need the tractor to mow - just for landscape work. I have a ditch I want to clean out - it is full of debris, I want to level...

Pat\'s Easy Change on BX23 - Any mods? Just bought a BX23 this week. After wrestling an hour with the cutter and busting my knuckles and chin (don't ask), I ordered Pat's Easy Change and received it today. Now's a little late to ask, but are there any mods req'd to the 3pt hitch lower arms...

May seem like a silly question, but can you mount and use the backhoe bucket backward? I don't have my BX23 yet but I was dreaming up all of the things I could use the backhoe for. My wife wants to transplant some large bushes and reaching over them won't work. Instead of reaching over, use the...

Is there any way to install a Tachometer on a BX23? I would like to be able to see the engine RPMs os as to get the optimum power out of the machine, plus know the right RPM when running implements.

10 hrs on the new machine and went to grease all the points. The pin located on the bottom of the bucket cylinder (closest to the loader bucket center) as well as the other bucket pins do not have greese fittings. Is this common? Should I drill/install a fitting at these locations or is there...

I got into a few larger stumps this weekend and thought I would share some pics. stumps

A few weeks back I started a thread which ran a little while about whether a BX23 backhoe could dig in extremely hard, deep, & water impermeable hardpan. The concensus opinion was that it probably wouldn't. I have a BX2200 that I've been thinking about trading for a BX23TLB. TBY member...

I'm finally retiring my old 1971 Simplicity tractor. It's now using more oil than gas. It served me well. However, it's time to move on. I plan to purchase a BX23 this month. I've considered and admired other tractors such as the B-series from Kubota, NH 24, Kioti CK20, Deere 4110, and others...

Since it has been raining, I have been thinking about the rear hyd. line that connects to the backhoe. With the back hoe off, the line gets reconnected to itself. BUT, if the line were fed into a valve for a Log splitter? Top and Tilt system? the list may go on? Does this make sense? If I...

What size bucket did you get with your BX23? Any advantage either way. Mine has the 10"

There have been a few threads lately with questions on the BX23 backhoe. I thought I would share some photos of one of the stumps I removed yesterday. This one was about 11-12 inches in diameter at three feet up from the base. The backhoe did well cuttting through the roots. The tree was a...

I'm looking at purchasing a BX23 and would like to get some input on how well the BH works. I will be doing a lot of trenching and putting in a fairly good size pond as part of a major re-landscaping effort. It doesn't bother me if it takes a bit longer than it would on a larger tractor, I just...

Hi all, I currently own a 2002 BX2200 with FEL. It has 325 Hours on it. The dealer will sell me the BX23 for $15,500 and from what I have read on this site, that is pretty good. They are offering me $7000 for my BX2200 trade-in. I am not so sure that is a good deal. They rattled of some $10...

I supposed to pick up the new BX23 on Saturday...but I couldn't wait. So I left work got my trailer, loaded the trade-in Bobcat, and now the BX23 is home. Went to take a picture and I have dead batteries. Pictures to follow... Awesome machine.

Is there anyone who has used a Post Hole Digger mounted on a BX23/22 with the "Down Pressure" option? In my area, the drilling contractors have told me that down pressure is needed to use an auger efficiently. When drilling through the "hard pan" the spoils come out of the hole looking like...

Has anyone tried to use a log splitter with a BX22/23? The dealers that I have talked with say that the BX does not have the power needed. Any comments welcome! Thanks

I have been researching compact and sub-compact tractors all of this year and thought I was close to making a decision and going with the Kioti CK20 hydrostatic until I've heard about compatibility issues with the MMM and backhoe (as well as getting the backhoe). I realize that the Kioti and...

As I am one phone call away from sealing a deal ona BX23....one last question. For owners of BX22, BX23 machines.....Do you have any regrets about buying your machine? Has it lived up to your expectations? What shortcomings have you noticed? Thanks, Rob

So, I was all prepared to detail my trade-in machines...a Bobcat 450, and a Gravely 260Z ZTR for loading and the trip to the dealer for appraisal.....when my guy says " Don't bother, I will send someone right to your house to check them out" Thats great service. The dealer is about 35 miles...

Hi all thanks for the feedback on the skid plate, it was a big help. I also got some feedback on my FEL problem. My control lever wont stay in the float position I have to hold it in. From the feedback I got, a few of you say it should stay in the float position does anyone know if this is an...

How quickly do the 3 major items, the backhoe, loader and mid-mount mower attach and detach?

OK, I used to post under a different name when I had a B7500 2 years ago. My needs changed, I sold the B7500, and now am thinking about replacing my current machines. I currently mow about 2 1/2 acres around a pond, and around many trees and my house. I have a large asphalt parking and drive...

Ha, I got to dig my trench today....for the the third time. The first time through I ended up with some shallow spots and then it rained, so I went back and cleaned up most of it. Then I had to put my project on hold and we got a couple of hard rains and my 4 foot deep trench became a 2 foot...

I'm picking up my new BX23 tomorrow and would like to know what you guys would look for, check for; before taking delivery of the tractor? It would be nice to see a list put together by you experienced folks for new tractor buyers, to check off when they take delivery of their new machine. I...

I was ready to buy a new Kubota BX23, a very nice machine, but I decided to go across the street and just look at the NH tractors and compare (I am a newbie and didn't even know what NH was). So... to make a long story short, I told the NH dealer that I wanted to compare his product with the...

My dealer said the BX23 Shop/Service Manual is very expensive and that he has never ordered one and would have to check with Kubota for the actual price. (He said the price of the manual was not in his system) Anyone know how much the manual costs and is it worth the price? Thanks

We have been looking into buying a Kubota BX23 mainly for its versatility and features. We have a 5 acre property and will use this tractor for doing small jobs. Majority of the work that we will be doing is landscaping and cutting down a few trees and pushing around dirt. We currently have a...

I just purchased a New BX23 Tractor and have a few questions. 1. Is there a "Mulching Kit" available for this series Tractor (I have the 54" deck). 2. I have searched the Forum and have some data, but I would like to hear what the available Tillers are that are compatible/recommended (so...

I know it s still early in the recent "discovery" of the sticking pedal issue's uncovering but is there any info yet as to if this affects only the BX2200/BX22 or did Kubota change this bearing for the newly released BX2230 & BX23 models? Anyone have access to the parts book info for both...

I have just noticed that I can leave the seat on my new BX23 with it in gear and the engine keeps running. It happens with the brake set or not. Not a good thing in my opinion. I thought that this should kill the engine. It will not start unless in neutral so the gear select switch is...

I am ordering my BX23 and it will arrive soon, I hope! I asked about a tooth bar for the FEL and the salesman said that he can't find anything on it from Kubota for the BX23. Any ideas? I've seen pictures of a tooth bar on one. Where can I get one>

The experience of buying your first tractor is unique to each person. Here is a link to mine. Pictures are taken on my piece of property in the pacific northwest. I hope you enjoy them. Steve Brittain Bx23

Spreading a 10 Wheeler of 3/4" stone. I now have a whopping 10 hours in the seat and I am beginning to get the feel for the tractor. I think the backhoe is a little weak. I tried pulling some rotted old small stumps and the backhoe definitely has limitations. Already thinking of upsizing.

I'm thinking of trading in my BX2200-TL for a BX23-TLB. I have hard clay underlain by hardpan. This isn't the stuff manmade by heavy eqpt. It's hundreds of thousands of years old and 4-16 ft. thick. The top is silica cemented, water impervious durapan, underlain by claypan so compacted that...

Hi. I am trying to decide between a Kubota BX23 and a New Holland TC24D. I know they are two different class or size of machines, but I can see benefits to having either in my situation. A little bit of outside opinion will go a long way right now. Ok, here goes: First off, I can't decide if...

Kubota didn\'t upgrade BX23 engine: I'm curious on why Kubota didn't upgrade the BX23 engine. I see that it remains with the same D905-E-BX engine that was in the older BX22 (and the BX2200). The new engine for the BX2230 is D902-E-BX but the BX23 stayed with the 905. Is it because of of the...

I am going to trade my BX2200 on a new BX23. What do you guys think is a fair price for my BX? It has 340hrs, 60in deck and loader. The dealer is coming tomorrow to look at it. Thanks.

I think I screwed up the first post, so all apologies if this a repeat. Thank you all for the information that is given freeley to this board. Your knowledge and expertise have given me the confidence to order my new toy. Err.. I mean tractor. I cant wait to experience all of the joy and...

Has anyone here had experience with road grading attachments like the TerraBond SpreaderGrader or the VersaPro? They seem quite expensive ($1,600) as compared to a box blade, although the expense may be worth it for an inexperienced operator like me. My road and parking areas are mixed-size...

I am considering the Land Pride RTR 2056 tiller for a BX23. I like the Reverse Rotation tilling and the ability to offset 10". It is the smallest Land Pride with reverse tiller rotation (which is reputed to hold the tiller down and handle rocks better.) I don't know if any other brands offer...

which machine is best need advice before I buy

First time on this site.Looking to purchase small compact tractor for light work on our property.I understand that the BX23 is good value for the money, would there be other machinery on the marker similar to Kubota BX23? I'm shopping around. Thanks, Charlie from Canada.

I'm thinking of buying a BX23 , I have property on an island and this machine would be ideal to cross over on a barge (ideal weight). I understand there are other machines on the market but are they as reliable?

It\'s Like Getting a New Tractor (BX23) Well, the BX23 had 40 hours on it. Tuesday AM I was taking a break with a cup of coffee when I noticed a flat bed truck backing up the driveway. Picked up the binoculars (wife is a birder) and read, "M_______ Equipment Co." -- Oh, it's my new box...

I am thinking about buying a bx23 or 22 and I was thinking of all the projects that I could use it for. I was wondering if it could be used for tearing up a sidewalk that runs in the yard of my house. I want to relocate it to run in different direction. So will a bx23 do this?? If so how...

On my new BX23 I have noticed that when in high range that the engine does not sound to be under much load when the tractor stops moving (no wheel spin) when using the FEL. If I switch to low range then I can go on. This acts just like a clutch slipping on a manual transmission. Every thing is...

I trailered the BX23 to the dealer to have the quickhitch and snow blower installed. After getting the tractor home, I noticed that the lefthand wedge did not fit above the tractor's frame, as it does on the righthand side. I also noticed lockwashers installed on the T-handled bolt that pulls...

I ordered the BX23 today but got really bummed when the dealer told me that he couldn't get the snowblower until Feb 27. He said he would deliver it anyway and then pick it up when the snowblower arrived. He is about 60 miles from my residence and I told him I have waited this long I can wait...

Thank you board for all your help so far. My BX23 gets delivered in the morning. The dealer called today with some info. that I want to make sure is correct. The BX23 does not have cruise control. The BX2230 I almost bought does, a new feature this year. Does this sound right and does anybody...

I just ordered a new BX23 and my dealer called wanting to know if I want a 9-10" or 12" bucket on the hoe. He has one with a 12" but will supply a 9" if I want it. My thoughts are that a 9" might dig better in hard ground and that a 12" would be better for trenching and moving more dirt. I do...

Hi from the Newbie, I am waiting on delivery of my new BX23 and am looking for trailer recommendations. This site provided lots of info and help in my buying decision and probably saved me $1500 by not buying the front blade for snow removal. I hope to use the FEL and a back blade. Thanks...

BX23 Arrives...Receives \"It\'ll dig\" Rating! Well as promised the BX23 was ready and waiting to be picked up this morning at 10:00. When I told my father who is a heavy equipment operator, and has been for 35 years, that I was buying the BX23 he basically said "why, you're not going to be...

I can't believe there's no idiot light to remind you that the parking brake is set. Has anyone jury-rigged one? Or are they assuming that no one uses them, so why bother? Hog

Hi, all- I'm looking to pick up a BX23 tomorrow. I have a 5' x 8' utility trailer with sides that I would like to haul the tractor (I'M BUYING A TRACTOR!!!!!!! I'M GETTING A BACKHOE!!!!!!!!! WHOOOOO HOOOOOO!!!!!!!!!!). According to my dealer the tractor, with loader and backhoe, will weigh...

Now, remember that I have never actually seen a BX22... As discussed in other posts, the BX23 has a different seat with a higher back, and a different hood latch. The seat certainly seems "plush." I have my seat adjusted all the way back to accomodate my long legs, and I do have to be...