kubota bx23

After 500+ hours of all sorts of rough bush, rocks etc I finally busted the hydro fan with a stick. In the bush? No.... Would you believe in the school grounds whilst moving a pile of dirt. The one and only stick within the entire area got me. Anyway I have got a replacement on the way. Any...

Hi all, I was using my 54" MMM on my BX23 along with a Cyclone Rake to suck up leaves. Everything was fine and then at some point the lift on the MMM stop working. The 3PT hitch is working fine. I had to manually lift up the deck and set the hgt up so I could clear obstacles. Anyone have a clue...

Has anyone here had to replace the Neutral Start Switch on your BX 23? >>> >> >>> >>>>

I looking to buy a tractor soon and the bx serie seems to be the size that i need. So i'm wondering if it's better to purchase the BX23(a little cheaper) or the BX24(one HP bonus but a potential fender's problem). Give me your opinion. Thank you.

Hello, I have been seriously considering a Kubota BX24, though there seems to have been a few issues with that model, examples that I could find (in no particular order) are: Battery cover Fender breakage Seat recall Low front axle fluid at time of delivery These items seem to have all been...

My deal on the BX23 died as the dealer delivered it without the snowblower, no manuals, no demo and the unit was not in good shape maintenance wise....so, I refused delivery. I am taking some of the advice from the tractor vets here and looking for a 7500/7610 type unit with a Woods BH6000...

I am looking to rent a trailer for my BX23 and all that is available near me are 12' trailers. The tractor is 15' long with the backhoe and loader, but its ony 8 feet for just the tractor. Was not sure if I could put the tractor on there and let one of the implements hang over an end. Thanks

I was wondering if anybody out there knows what size trialer I can tow the BX23 with. I am looking to rent one and they only seem to rent 12' trailers. If I buy one it will be a 16'. Just wondering if anybody knows if the 12' trailer will work for this one time. Thanks

Government seized GovDeals.com

OK, this is my second shot at this question. The first one had no responses so I am hoping that more people have had a chance to do this. Can anyone give me any idea how to check/change the gear lube in my bagger? Alos, I have a spreader that states it requires an oil change, any idea on...

I just got a Bx 23 and am debating if I should by a mower deck and power bagger from someone for $2200. It is like brand new. When I asked why he is selling it, he said he has only used it a few times but it is a pain to take the bagger on and off and the put the BH back on. So he is buying a...

I have been one of the people vacillating between buying a used B20/21 or a BX23/24 for some time. I have pretty much decided to buy the BX23 or 24 this week but wanted some advice as to what all you guys with experience would suggest. I live in Northern Ontario, in a mountainous area, just...

I noticed a Low Sulfur Warning sticker on the gas pump today - not to be used on 2007 cars or later. This was a Getty station. Can damage engine. Does anyone know if this Diesel fuel is OK for my Kubota BX23? What is going on in 2007 - will there be two diesel fuels?? Thanks

I have one nipple that will not take grease. It is the left/right piston for the Back Hoe Boom. I removed the pin to attempt a fix and it was very dry. I tested the nipple, and the grease appeared in the sleave without a problem. I cleaned it up and placed it back in, but I still cannot get...

Folks, Couldn't have done it w/o the BX. Here are some pics.

I live in the great northeast and know of a dealer that has a leftover 2005 BX23 Sub Cut TLB. It has a few demo hours on it but that's it. There are no extra implements with it. The salesman said he will "let it go" at $15,500. Many dealers sell the 2006 BX 24 at about that price. Anyway, what...

Hey all... been a while. I was landscaping this morning when I noticed fluid running out from under the left side front axle of my BX23 (259 hours). After shutting it down and checking all fluid levels, I determined that it was coming from the power steering lines. I started it up and drove...

I'm thinking about a BX24 and want to put a BX2763A 60" hydraulic angle blade on it for winter. If any of you have this setup I have two questions. 1. Does the blade have float control? (my dealer is not sure but thinks not) 2. How easy does the blade go on and off?

I posted a few days ago that my BX23 is leaking hydraulic fluid around the rear somewhere. I mowed last night and had to run nearly WOT for about 3 hours to get the grass cut and bagged, it really looks good. I would guess that I lost about a teaspoon of hydraulic fluid in the process...

It has been a good summer for the BX23 so far after lots of winter time snow plowing and some spring land clearing the mower and bagger have been really working hard without flaw. I just hit about 90 hours and I noticed three spots on the garage floor directly under the back end of the machine...

Hello all, I am doing multiple yard projects, and tonight after using the macine with great success, I went to dump some yard waste, and the front end loader on my BX23 would not raise. It would not lower in the lower position either, but float position dropped it right down. The rollback and...

An odd match perhaps but I located a used LX4 deere rotary cutter at a local dealer for $800. 1. is that a decent price 2. would it be able to be run off the bx23 without there being any fighting between the orange and green? thanks

I asked this question earlier under an old thread, but it was kind of buried and I don’t think too many saw it, so I’ll try again. I was at the dealer and inquired about the air filter bracket as mine had broken a week or so ago. I welded it up already so there wasn't a rush. They had not...

I apologize for any redundancy but I have checked the archives and found more confusion than answers. I am considering buying a rotary cutter for my bx23. It would me used mainly for cutting unruly fields that are neglected and overgrown. Very little if any saplings/thick brush. What would you...

Hi folks! This is a great forum! I’ve just joined the ranks of the little Kubota owner/operators with the purchase of a used bx23. I think the thing has 236 hard hours on it but I figure that is just broke in and I’m not gonna be working it to death (I hope). This ain’t exactly little tractor...

I let the grass go a week and it went crazy with all the rain we have had. I started to mow last night and about 100' down my first pass the bagger turbine stopped while the PTO shaft continued to spin. I could hear a pretty good squeeling noise so I shut everything down and headed for the...

After a month of not being able to use the tractor (flooding and extremely wet weather), I put the backhoe on the bx23 and installed some underdrain around my yard. After backfilling the trench, I went to backblade the area and noticed that tractor could hardly move. I was in 4wd, but it...

Ok I have a customer with a BX23 and it has los about 2-3 quarts of Hydro fluid within a month or 2. He has 90 hours on the machine. It doesn't leak out it just gets low and loses some hydro power. There is about 90 hours on the machine. And my mechanics don't want to be bothered here right...

I knew it was bound to happen. I welded it and it is fine now. My question is, does Kubota have an improved strap that can replace the poorly designed one, and will the replacement be covered by warranty? It's no big deal, I don't think the old one will break again, but it would be nice to have...

After changing the gas filter and the BX23 was running smooth, I decided to level some ground. The FEL was curling when trying to back blade and noticed the left side was hanging. Upon closer examination, I noticed the pin was gone. I searched about and the pin was no where to be found. I think...

After changing the gas filter and the BX23 was running smooth, I decided to level some ground. The FEL was curling when trying to back blade and noticed the left side was hanging. Upon closer examination, I noticed the pin was gone. I searched about and the pin was no where to be found. I think...

This is the third season for my BX23. No previous problems, but this year the left side pin that holds the mower deck to the lift link keeps working itself out, eventually to the point that the left side of the deck falls off the lift link. Any ideas on why this might be happening? The spring...

I just finished the 100 hour service on my BX23 and adjusted the brakes by following the instructions in the owners manual. Now it feels as if the brakes are dragging all the time. Like most owners I've occasionally driven the tractor and forgotten to release the parking brake. With the...

Gentlemen, I own a Kubota BX23 it has 192 hours on the meter. I have followed the maintenance and fluids schedule. I've been very happy with this little tractor, as it is a little workhorse. I have a problem that recently started, around the 170 hour mark, were it loses power, the...

How do I engage the float position on the FEL? I think this would be useful for loading peat off the lawn after the pile was dupmed to prevent further damage to the yard? When its engaged does it follow the nap of the earth or contour of the ground because of it weight? How can I tell when its...

I remember a post where someone made a way to remove the back hose using casters and 2x4s. I have never removed mine in 1 year and have the need to do it. Please help if you know where i can find that post.

I'm new around here (hi, by the way, and I've really enjoyed reading all the great info on the discussion boards). Since I'm in the market for a BX23 or BX24, I found the following TBN classified ad interesting: http://classifieds.tractorbynet.com/ViewItem.php?ItemNum=329879070 Does anyone...

Hello all. Been a while since I posted but I've been reading you pretty much daily. My problem is flat tires on my BX. 2 years old, 220 hours. I just can't seem to keep them inflated. A total of 9 punctures and 2 holes in the rears that required 2 new tires. It's not like I'm driving on...

Got my sprayer out last weekend so I thought I would post a few pics in case anyone else is interested in doing this. I Made an atv sprayer into a pull behind sprayer in a utility trailer to be pulled behind my lawnmower. Then I got my BX so I decided to build a 3ph carrier for it. Here is the...

Installed my 60"MMM this weekend for the first time and found out the cutting height knob is incorrect. I wanted the blade height at 3.0" and this turned out to be a setting of 1.0" on the selector. Can I remove the black selector knob and reinstall to show proper height? Any ideas on how to...

Last Friday on the day I was supposed to be in the wood shop working on my first born's crib, I helped by builder dig a 65ft trench with by BX. After digging the trench as I was turning the seat so I could put the tractor away, the seat SNAPPED OFF. The bolt that is swivels on just snapped. I...

I am considering a box blade and landscape rake to redo my lawn. I need to regrade and back fill with yards of material and want to save my back in leveling it all out. Sure, its only 1/2 acre, but still, thats alot to do by hand, plus, I want to use the tractor. I am looking at the Cat 0...

I'm sitting here scratching my head wondering if something is wrong. I changed my transmission oil (SUDT) in my BX23 today at 55hrs on the meter. When I removed the screen I was surprised to see there was nearly no shavings, chips or other debris on the screen. It was very nearly clean??? I've...

Just thought I would post a few shots of my barn preparation. I am pulling stumps and moving rocks getting to level a pad and begin foundations.

Hi all, I just bought a BX23 with a 54"mmm yesterday and I'm full of questions. The tractor won't be delivered for a couple weeks so I will probably be using up my nervous energy while waiting by posting stupid questions here. I have been lurking and reading while deciding what to buy, and the...

While trying to dig out a tree stump, I had the idle at max speed. I had been at it for 1/2 hour when the engine suddenly slowed for 10 seconds then went back to normal. As the engine slowed, so did the BH speed. This continued for the rest of the day. I shut the BX23 down at one point for a few...

I just purchsed a leftover BX23 yesterday:D Very exited to get it! Can I hook up a 3pt so I can use attachments like a post hole digger? Need to install 500ft of post fencing, could sure us a digger. I'm a newbie to this hole tractor thing and have alot to learn. Sure glad I found this site...

buykubota-ML-855542-ML- Posted in wrong forum

Just bounght a leftover BX23 yesterday. I am very exited to get it some time next week!!! I don't know much about adding a 3pt so I can use other attachments, like perhaps a post hole digger. I have about 500 feet of post fencing to install an sure could use a digger. Hopeing to just rent one...

After a normal working afternoon, returned to the garage and the key will not kill the engine. It continues to run with the key in the off position. I have checked wires, connectors, pulled the seat relay, tried to engage the mower and got off the seat, nothing works! Any ideas on how to turn...

I am finally making my purchase this week I believe. Thanks to many of you with your thoughts and wisdom. I am purchasing the BX23 - since its somewhat on sale with the new BX24 out. I have the option to go with AG or Turf tires. I feel like the turf tires will have plenty of traction for...

I am finally making my purchase this week I believe. Thanks to many of you with your thoughts and wisdom. I am purchasing the BX23 - since its somewhat on sale with the new BX24 out. I have the option to go with AG or Turf tires. I feel like the turf tires will have plenty of traction for...

What is a reasonable price for a 2005 Kubota BX 23 TLB with 110 hrs? Mickpeg

I am considering the installation of a Geothermal heating system in conjunction with some major renovation work on our house we have planned for this summer. These systems are expensive but a large part of the cost involves installing the underground piping required. The piping can be...

Hi Everyone, I have a BX23 and my 50 hour service is fast approaching. I was wondering, how inportant is it really to change the hydraulic fluid? My brother told me that he has never changed the hydraulic fluid, only the filter.

First time buyer needs advice. mf2310 or BX23 or? First time buyer here, with 3 hilly New England acres and 200 ft driveway to plow. I need a 4wd tractor to plow, dig some drainage ditches, dig up some stumps and small rocks, and perform some light landscaping along with some other relatively...

A few shots of my new toy hoisting my new toy out of the truck. This is a 10 kW Porter-Cable with a Honda 20 hp engine.

Had to get a stove from point A to point B in a hurry and I was by myself. Unloading wouldn't be a problem and it ends up loading wouldn't be either

I have enjoyed other pics posted in the forum so thought I might post one of my own. My new BX23 sits in front of a waterfeature that I built with my former BX2200. I purxhased the BX23 for the additional BH feature. Once you have a BH, it is hard to imagine life without one.

I really havent taxed the loader until today and Im a little disappointed. I was using the loader to lift and move a box blade (est weight about 400lbs-450lbs). I had it chained to the top of the bucket. The loader would not curl it and it would only lift it about 8" off the ground. I realize...

My Bx23 manual says 375lbs and 42" max for a tiller or box scraper. Are any of you Bx23 owners running wider and heavier tillers or BB? Thanks John

List of issues on my BX23 Folks, Here is the list of issues over two years that has been resolved on my BX23 1/ Could not start. Safety circuit, HST pedal neutral was not engaged. 2/ Lost FEL Float position. Found ice built up inside 3/ The famous Air filter housing fastener broke...

Just a photo from New Year's Day.

BX23 Front Axle leakage Saga finally fixed I have owned a BX23 for over two years and all but the first two months the front right axle has been leaking ever since. My dealer is a very nice man and at the second visit he found a hair-line crack in the bevel housing itself. Three days later...

Hi all.. I have been doing a fair amount of digging this summer (approx. 200yds – mostly through shale). I’ve had no problem engaging the differential lock and could get all four wheels to spin. I’ve learned not to push it too much since it tends to rip up the bar tiers when they spin. I...

There has been talk about a plastic edge for the FEL on a BX23. I plow a 1000 foot paved driveway with my BX23. Where does one buy a plastic edge? Is it available from a Kubota dealer or another supplier? George

My wife accidentally took a container I had hydraulic fluid in from a recent servicing and poured it in the gas tank of my BX23. I recently had major surgery and was not around to witness what happened, but put 2 and 2 together when the BX23 wouldn't start today. I know this may be funny to...

BX23 and 14\" of snow Well we got a lot more than I expected Friday here in NW Connecticut. I got home from work at about 7 PM to find the snow up to the bumper of the car in the driveway, I was excited to use the BX23 but when I saw how deep the snow was I became a little anxious. Well I...

I am looking to purchase either the 60" front blade or the blower for my BX23. I currently have a 23HP Bolens 2WD tractor with a 54" blade. It works well but I spend a lot of time managing snow piles. I live in NJ so snowfall is moderate, averaging 5", but can get up to 14" per storm. I have...

Hey guys, do you think this is for real or a scam? If I didn't live on the opposite side of the continent, I'd try to go get it.

Hi all....I'm considering the BX23 as well as the JD-2210 and an aftermarket BH to do some "watershed maintenance". I really like the BX23 as it should do all I need it to do, however, the lack of ground clearance scared the devil out of me as does the 2210. Has anyone ever taken their BX23...

I've got a BX 23 w/ the front snowblower and quick attach. Obviously I have to remove the front blower, but do I have to remove the quick attach to use the front end loader?

I will be getting the BX2763 plow and have turf tires. I'm debating about getting another set of rear rims with AG tires. Does anyone have experience with plowing on turf tires? I have chains but have concern of damaging driveway surfaces. Thanks.

I was doing some small boulder removal work and using the FEL to place the rocks up on a bank. The machine was on an ever so slight side to side incline, and as the boulders went up so did the center of gravity. Before I knew it, the machine went over on its side! Boy did it happen fast, I...

I just installed my Tiny-Tach diesel tach and have a question. In light of all the "fast idle, engine life, etc" debate here, I was curious about my rpms, but puzzled by my BX23 readings. At the lowest throttle setting, the RPMs show 1280. At the fastest setting, it shows 3390 rpm. Since the...

BX23 Temperature gauge - what\'s a normal range? I've only had my BX 23 for a month or so, and I've not seen the temperature gauge go more than a 1/4 to 1/2" from the lowest setting. Is this normal? Other than two mowings in late October, the rest of the 20 hours or so have been with FEL...

Well we finally got some snow in Western CT, I would guess we had about 4 + inches or so on our new 500' long driveway. I was so excited that I couldn't wait till the snow stopped to get the BX23 with my blade on to check it out. I was worried about the turf tires on the driveway as it is a...

Does anyone have a Part Number, and Price for the Kubota High Capacity Alternator Kit ? Also, how many Amp is it ?

Now that my major dirt work is done (lawn expanded, stumps dug out, pond finished) - I am contemplating downsizing from my L3830 to a BX23. I couldn't live without a TLB ever again, but need a mower with a bagger. How long would it take to remove the FEL and BH from the BX23 and mount the...

I found Wheel Weights for my Kubota BX23 listed in the accesory section of the Kubota Web Site, but I do not see a Weight Box. Is there one available from Kubota or is it an aftermarket item ? Also, I see Suitcase Weights and a Front Bracket listed there as well. Can I assume Kubota does not...

owning-ML-776049-ML- Kubota specific post moved to Kubota forum.

I have a 2005 Kubota BX23 that I am planning to outfit with additional work lights. While I was looking around the battery compartment, to tie in with the electrical, I noticed two square openings in the back of the dash that are not quite cut through and are located below and just to the left...

While ago, I saw some discussion on a BX23 manual. There was one on Ebay, it looked like a copied CD, for about $20. Could someone point me in the right direction? I hope to have my BX23 delivered Wednesday, so I was hoping to look at the manual early. Thanks, Joe W

Since I have installed the grapple I have noticed something and don't think it's quite right and wondered if I could get a little help. We (Jeff at american solutions actually) have devised a simple test. If a couple of people could do this test to see if it's my machine or the way it's suppose...

I'm considering the BX23 as my first tractor purchase. I feel comfortable with this machine for general landscaping, snow clearing + sweeping my b-yard skating rink. I also have a few electrical and irrigation trenching jobs that should be ok. My concern is that I want to run a water line out...

I don't know if I will get this whole thing done tonight but I figured I better get on it. Some people wan't to see more of the install process. I figured this forum was the best place to put an attachment install thread. I have some action pictures in another thread BX23 grapple I am...

I'm new to my BX23 and have a question on 4WD. I presume there is no mid or front differential, so I can expect binding on the wheels when turning on firm ground, etc. While using it on dirt or grass, I notice that unless I am travelling in an absolute straight line, I can feel some slight...

Looking at either of these two BX models, how long and heavy should I be looking at for a trailer with FEL and BH attached? Thanks KC

Thought this subject was covered before, but could not find after doing a search. My manual indicates 22 fittings on the BH, but I found 23. Extra 1 not indicated was at the bottom of the cylinder that is inside the boom. FEL I found 10, but have seen references by some to 12. I could not find...

Folks, I'm having a little leak problem on my front right axle, it sort of comes and goes, the first time I brought to the dealer he didn't find any thing, but a year went by and the leakage seems to get worse and this time he found the hairline crack, I didn't want to give up the tractor but...

How much does a BX23 weight, with FEL and BH? THanks KC

Stinkin\' BX23 seat broke again. This is a rant. Today is in the mid 60's and sunny out - rare for this time of year around here and especially welcomed because it feels like it has been raining non-stop for the past month. So as usual when there are days like this - I am outside digging...

Former lurker, but am now a proud owner of a new BX23 (arrival pic attached), so have registered. This is a great resource. And here's my first question already. I got around to checking levels and it seems that the hydraulic oil level is low. The manual says to check levels with implements...

I wanted to thank everyone for there input in my search over the last several months. I looked at lots of different machines and I found myself always comparing them to the BX. I took the advice of buying form a dealer you are comfortable with and conveinent. I did not go with the lowest...

Just did my 50 hour service and I'm wondering about the fluid capacities listed in the manual. There is a note on the back of the Lubricants page that says "Indicated capacity of water and oil are manufacturer's estimate" but I'm wondering how accurate of an estimate. When changing the engine...

I am considering purchasing a BX23. Does anyone know of a grapple kit / bucket for use on the BX? I contacted ATI and they said there GK4866 won't work bcz of the center cyclinder on the FEL. Suggestions?

Hello all, I just plunked down some money on a brand new Kubota BX23. Yes, I’m excited! I will use this rig for landscaping and ATV trail work, snow removal with the FEL, York raking, rough mowing, building site prepping, and some wood lot work like log skidding, hauling trees around, etc...

I was trying to attach the backhoe after dark with a flashlight (dumb move #1) and ended up pinching the lines between the frames. Unfortunately, when this happens, the backhoe can no longer be moved and so it is impossible to UNpinch the lines. I tried to move the tractor around a bit to...

Has anyone bought a front mount snow blower and installed and set it up themselves? Is there much too it? Any welding or special tools required? I'm buying one soon but I don't have a trailer so I'd like to just take it home and install it myself. Thanks

QUESTION: I have a boat/motor/trailer with a combined weight of about 5,000 pounds. I would guess the tung weight to be around 250 pounds. Can I safely move this around the driveway with my BX23 and its drawbar? Essentially, I will drive the boat up the driveway with the truck and then drop...

</font><font color="blue" class="small">( You have been given good advise. I hope you aren't like some who ask for advise but have their minds all ready made up as to what they are going to do. The only reason I can give is looking for support for their stupid plan. (Search the site and you...

I need to find a good 3pt snow blower for my BX23. My wife wants to keep the FEL on this winter for moving horse m..... so I told her she'll need to back up the driveway to clear the snow! What is your best experience with snowblowers or do you have a better recomendation for a 200' gravel...

Hey All, Just read through a trailer post with a lot of different opinions, so I'm hoping to come to some sort of concensus here. I've got a BX23 with BH and FEL, of course, and a Tacoma 4 cyl. 4x4. I want to go as small as possible with the trailer for the truck's sake, but I also want to be...

Hello, Looking at either a new BX23 or BX2230. My local dealer is giving me a better price on a BX2230. I can get a loader, 60" belly mower and a woods backhoe for $16200. He wants $17500 for a bx23 with a 60" mower. He says there is very little difference. Both prices are after rebate...

I bought the BX23 last year with BH, FEL, toothbar, 42" Bush hog , tooth bar and bar tires. It has 100 hrs. I have sold the property that I bought the tractor for, and my present property is smaller. I am thinking about selling my "Bota" and was wondering if anyone knows it's present value...

My wife said that the BX23 was making a gurgling noise when she shut it off. I could see that the coolant was low. I let it cool down for an hour before adding coolant. I checked things like, -radiator sceen -Radiator coils -oil level Everything checked out O.K. She set back out to do some...

Last year as the days started getting shorter and I was working into the dark many nights I realized that the headlights on my BX23 were pretty much useless in many cases - especially when traveling with the FEL bucket raised - because the bucket blocked the headlights. So I experimented a bit...

Looking at a 2004 bx23 with 35 hours for $12,500. No additional attachments included. Is this a good price? Also, can this machine handle a 4' bushhog? thanks.

Can any Canadian members in Ontario and Quebec and the Maritimes provide pricing on the BX23. Dealer I got a quote from this week is up $1600 from quote I got this spring from him. Says Kubota not offering incentives on small tractors this fall. Got a price of $23,200 cash Plus tax. Even higher...

Ok. I am going with the BX23 but really won't be ready to buy until November/December. I am worried they will not continue the 0.0% financing I was counting on. Does anyone know if that program will continue? Are those good months to get a machine at a decent price? Thanks

Hi, I am going to look at a BX22 which has 50 hrs and is said to be in "as new" condition. How much do the loader controls and ease of removal differ? What else is there? Does it still have cruise control? What is something like this worth? I have found used BX23's with 200+/- hrs for $13k...

I was digging with the backhoe when my wife pointed out some spots in the soil underneath the BX23. I found the source of the leak. I looked in the owners manual and searched TBN for an answer, but was unsuccessful. I have attached a photo. Is this source a type of pressure relief valve? Thanks...

I purchased a 6' Leinbach landscape rake with the wheel kit. I am unable to lift the rake off the ground. It seems that the lower arms are either too short or the top link is too long on the 3PH. When I install the wheels I am able to get the rake teeth off the ground when the lift arms are at...

Anyone know of some good hyd couplings (part number and/or links) for the Bx22/BX23? I need to replace some of my old ones on my 22. I have a new hyd coupling from my dealer and it is a 69 series: but who makes it is?????? male:694511-0404 female:694521-0404

I thought the cutting height was controlled by the adjustable deck wheels with the deck "floating" as you mow. So, what role does the "mowing height adjustment knob" play.

How does a quote of $14,825 plus tax sound?

Hi group, I currently have a single axle trailer, 5.5' x 10', with a GVW of only 2130 pounds. I originally got this for hauling around an old Wheel Horse tractor. It does fine for that, and the tractor just barely squeezes on when I have the 3pt grader blade attached. Is anyone here...

Hi group, I've read a number of comments on these boards about the 3PT on a BX23 and how it's not a "real" 3 point hitch. What's not real about it? What's this about no position control? Is this to say that you cannot make the hitch go up and down? That wouldn't make any sense. I have a...

Hi group, I've narrowed down my tractor shopping to either a BX23 or a comparable Massey Ferguson. My question here has to do with the BX23. 1. There is an option for a high capacity alternator. What would necessitate that? If I wanted to have the option to add a few work lights, the stock...

There have been a few posts appearing with tidbits of info about new Kubotas coming next year. Supposedly there is a replacement in the works for the BX23. So I figured I would put my laundry list of wishes out in the faint hope that Kubota actually reads these forums and this might strike a...

So, I'm a couple weeks away from buying myself a subcompact TLB. As of today, the BX23 is the front runner. But, I was outside today looking at my ground, and couldn't help but wonder if the tiny backhoe on this tractor actually would be able to just bust right into my ground and take out a...

Just how difficult is it to install and remove the mower deck?? My dealer is saying he recommends a rear finish mower, but then I would have to remove the BH. Which would be the least effort?

First removal of FEL and BH, first service, first "bath", first use of the MMM, and first reinstall of the FEL and BH - all in one weekend. Picture is of the stripped down BX23 after its bath. Got up to 54 hours early last week. I didn't want to stop in the middle of the job I was doing so I...

I have owned a BX2200 for four years, and about to trade up to a BX23. There must be some place on the web that has training on the fundamentals of bh operation, but I haven't found it. Yeah, I know just diggin in th dirt is fun, but I thought a little primer b4 I start my project (or...

What brand of tires came on your BX 23 ? What type of tread are they ?

Thinking about buying a Kubota BX23 buykubota-ML-711265-ML- because it's brand specific.

Thinking about buying a Kubota BX23 Does anyone have any feedback on this make and model? I will be using it for digging, moving rocks, etc. I will not be using it for commercial use, however, I live on the top of a mountain and the ground is a digging nightmare. Thanks

I am a first time tractor buyer. Im thinking about buying a kubota BX23. How does this brand and model rank among other tractors? I know everyone has their own opinion on brand, but Im just hoping for some pros and cons before I buy. I am a homeowner in a rural area and mostly this tractor will...

I am new to this forum... wished I'd found it years ago. Anyway, I am looking at posibly upgrading from my BX2200 (which I love), to a new BX23. 1). What should I get for the 3 year old BX2200 with 54" mmm, front loader 2). What should I pay for a BX23 with bucket, mmm, and bh? Thanks in...

THIS IS FOR A FREE BX323 REPAIR MANUAL. I do not need anymore bought a Kioti CK20. http://home.comcast.net/%7Esump/Bx_manual.htm

My wife has decided to buy a BX23 and a Power-Trac PT-425 to start up a growing nursery on our 10 acres and a small job landscaping business. The BX23 will be used mainly for BH work, to dig holes for larger trees and to help haul mulch and such. The PT will be doing the soil conditioning and...

I am really interested in the BX23 especially considering the 0.0% financing that Kubota is currently offering. Does anyone know what I should expect to pay in this area? I will travel for deal if needed. Thanks!

I had my BX23 serviced last week. I decided to check all the fluids in the tractor when I got it back. Most fluids were 1/2 between the high and low mark. Seemed a little cheap that they were not topped off. I checked the fluid in the rear under the seat, and the engine oil. However, when I...

First off let me just say that I'm a new member and I have been reading your posts for some time. I can't begin to tell you all about the wealth of great info that I've read. Great site! Now for the important question. I'm in the market for a new tractor and I'm having trouble deciding. I have...

Is a 5' Woods rotary mower to big for the BX23? Or would I be better off with a 4'? Intended uses: Right now is to cut down high weeds and over growth of several building lots. These lots have been cut 2 to 3 times a year for the past three years so nothing real bad here. I buy and sell...

I had dropped the backhoe out beside the garage while I had my 3ph sprayer attached. I decided to see exactly how long it takes to go from 3ph to backhoe(NOT hurrying that can get yo hurt). I have the upper pins for the liftarms drilled out slightly to accept those 1/8 finger smasher pins. It...

I have a WorkSaver 300 PHD for my Kubota BX23 tractor (great machine for my small alpaca farm). The dirt on top of the Rocky's foothills is rock hard in summer and I have a no down force on the Cat 1 3PH. So I have ordered a Down Force Kit from Worksaver (DK-50) that has a single throw...

Just had to write out a quick post to celebrate my BX's 500 hour milestone. I have had it for a year and three months and it has been an incredible machine. Very few problems and I have not been the easiest of owners. I have worked it hard. Great little machine. Attached is a pic of some...

I had been debating about getting a new tractor for a long time and finally took the plunge. My BX23 was delivered last Wednesday. I got it with a 54 inch deck and turf tires, the rear ones I had loaded. For those that keep an eye on pricing I paid 14,800 and another 1,500 for the deck. The...

Been waiting on my friend that I dug a pond for last month to send me the photos of the BX in action moving some rocks around. Here is the first of a few. More are in my album.

I've been meaning to post this for a while but got caught up with work and digging holes . The knowledge base from TBN was a great help in selecting the BX23 ... thanks . Tractor purchase data: BX23: $15,995 5' blade: $275 block heater: $100 3yr-0% $95 Total...

I just bought a bx23 from a dealer that is about 50 miles from my house. This was supposed to be a new unit. The unit arrived and I noticed that it had over 4 hours on meter, which really didnt bother me alot . However Ive ran it about 3 hours around the lawn today and hour meter didnt change,it...

Hello, I have a Kubota 70000-73274 engine block heater that I originally purchased for a BX2200. Well, the BX2200 got traded for a BX23 before I installed the heater. Will this block heater fit my BX23? My '23 is coming up on its 50-hour service and this would be a good time to install the...

I let the dealer talk me into a rough cut Landspride rear deck. Now after wrestling with the 3 pt hitch for 30+ minutes on several occassions, I'm beginning to think the Landspride is too big for the smaller BX23 3pt hitch. It is extremely difficult to get the hitch links wide enough to accept...

Kubota posted a recall on BX23 ROPS a couple of days ago check the serial number listing and see if it applies to your machine. If so contact the dealer you purchased your machine from and get it fixed!!!!! Saftey First! Because of the file size limitations I can not post the notice. I will try...

I just noticed recently that the front axle on my BX23 appears to be leaking. I have a definite leak on the right hand side of the axle where the wheel hub pivots on the main axle assembly and then it also looks like there is a leak around the center axle pivot point. Has anybody else seen...

Just about broke in and getting used hard. The old house tear down turned into a cleanup from a burn down. Kids vandalized it for years and tried to burn it several times but didn’t have enough fuel until I started burning limbs from tree trimmings. All they had to do was carry the hot coals...

Upon reattachment of the FEL the red coupler won't lock into place. Is there a trick or do I possibly have bad coupler?

Any ideas of where to get a hydraulic thumb for the BX23 BH? Is this possible or do they have to be mechanical? Also is there something similar for the front bucket? I would them to be hydraulic as that makes them much more usefull. I have used them many times on full size backhoes. Thanks...

24\" bucket mounted on a BX23 backhoe A while back TBN member Stef put up some postings in which he mentioned that he had a 24" bucket for his BX backhoe. I was the lucky recipient of that bucket when he decided to sell it because he was B3030 (lucky ). Well I finally got a chance to mount...

BX23 as a big ol\' floor jack I needed to replace one of the 4"x6" posts on the front of the barn. As it turns out I have this handy, giant floor jack. I used the FEL to boost the beam up just enough to get the old post out and the new one in. The attachment shows the new post in place (the...

2005 BX23 using 60\" mmm, cut in high or low range? When I was shopping, I was told by every dealer that the 1500 would only cut grass in low range on sloping ground. So that info helped sway me to the BX23. Well, it will only cut in LOW range on slopes.... I am left thinking that the 1500...

I need the Kubota filter numbers (all of them) for a BX23. I want to use WIX filters and I can not cross reference the numbers without the Kubota part numbers. I tried FRAM and they have no listing either for a BX23.

I have received a lot of great information from this web site, but this past weekend reminded me why I spend so much time reading the posts. After doing some grading on Saturday, I put the bx in the garage and went to coach my son's baseball game. When I got back in the late afternoon, I gave...

Wondering if anybody out there has any experience with some of the Boboat (or other brands) mini skid steers. For a number of months now I have contemplating modifying my BX23 to make the FEL bucket a quick attach setup somehow. I have run a bunch of ideas thru my head and none of them really...

I've had by new BX23 for about 3 weeks. On delivery one of the FEL hoses would not uncouple, pried it off and replaced the end, ok. On my 60" mmm one of the wheels rubs againts the deck housing, rubs the paint off the deck and is wearing off the wheel. It looses power, this may be my fault...

Well the dealer brought my BX23 saturday morning. I didn't waste any time getting it in the dirt. Boy do I have a lot to learn about operating a backhoe. here is a pic with my daughter on the seat and me behind her. You can see that I had to buy a kubota to go with her hair Bernie

Just checking for peace of mind. I did the 50 hours a few weeks back and I can't help feel the BH is a lot slower. I checked the hydro trans fluid and is on top line of the dip stick, so fluids are OK. I remember when I got the BX23 the bucket curl was fast, the boom, left right movements...

2005, 17 hours w/mower, 14000, in Ohio

BX23 60\" MMM that doesn\'t rub Greetings, I've noticed a few posts lately that indicate where the 60" MMM either rubs the rear tires in transport position or can't be raised to full height due to the MMM hitting the tires so I wanted to post some pics of a MMM mounted on a BX23 that doesn't...

What size wrench does everyone use? 20mm doesn't quite fit and 13/16 seems too loose. Erik

I've had my BX23 since March. Normally I pull it into the garage with the left side facing a wall. The last time I was out I backed it in, for no particular reason. As I am working around the garage on Saturday, I notice that the front wheel on the left only has 3 bolts instead of 4. I...

BX23 60\" MMM hits right rear tire First off, I have been a lurker for 6-8 months and just purchased a BX23. I am very glad that I found this forum...great people and I learn something new each time I log in. I did several searches to locate my subject but had no luck. If there have been...

Hi guy's this forum is great.I am hopefully going to but a BX23,But I need to know the measurement of the widest part of the machine.It look's the stabilizers for the backhoe might be the widest part.My backyard where most of the work is to be done is fenced in with chain link, It has 2- 48 inch...

I’m stuck deciding between tractors, the BX 23 TLB with 60 in MMM and the B2630 LA403/BH75 with a 60in MMM. We have just under six acres half of which I mow, the former owner was a golfer, the other half of the property is wooded. The wooded half has a 100-foot deep gully that occupies about...

I am looking at the BX23 and the B7510, I have 3 acres and will use the machine BH & FEL only for yard work (drainage, stumps, walk ways, etc) no mowing. I live on a hill and will encounter some rough areas in the woods. Will the BX 23 do the job or should I step up to the B7510? The BX23 is...

I'm looking to purchase a trailer for my BX23. Does anyone knowthe overall weight of the TLB? How long of a trailer will hold the BX and what GVWR trailer should I look at? Thanks

Hi, I am sold on the fact that the BX23 is for me. The problem is $$. Do I invest $18,500 approx. for a new unit with the attachments I want or do I wait for one to come along second hand? Should I look for a Second hand BX22? What is a 3 year old BX22 worth? What exactly is the difference...

I had pretty much made up my mind on a BX23, but now I'm considering a B7610+BH. One question I'd like to ask is: If money were no object (it is, let's just pretend it's not), is there any reason you would choose a BX23 over a B7610+BH? Here are some advantages of the B7610+BH <ul...

I'm looking for a WSM for a BX23. I called TractorSmart but they have none in stock and would be 2 - 4 wks before I would get one. Does anyone know where I could get one? TractorSmart quoted a price of $43.40 + S&H. I wouldn't mind a used one if anyone had one they wanted to get rid of. Eric P.

Been keeping the FEL dismounted quite abit lately but noticed the last couple times I've mounted then dismounted it that the right side boom cylinder actuates way before the left side does. I noticed this once I hooked the lines back up to remount the FEL. The right side moved a good couple...

Hi all. I have a couple of acres that I am clearing using my BX23. While I can remove the vegetation I am having difficulty smoothing and leveling the ground. I live in Upstate New York. Do I need a blade attachment? A Rake attachment? Any suggestions? Thanks in advance Chris

In South Jersey the dealer is giving me a "bottom line" price of $15,995, before taxes. Does that sound reasonable? Thank.

Hi everyone, I hate that this has to be my the subject of my first post. I just found a dent/scratch which is seeping hydraulic fluid. It is located about two inches from the drain plug, smack dab in the middle of the transmission bottom. I obviously "rubbed up" on an immovable rock at some...

I have a Kubota 60" MMM that I used to use with my BX2200. The 2200 got traded in on a BX23 and I'm attempting to attach the mower for the first time. Problem is, I can't get the mower rear links on the tractor to drop in order to attach them to the mower. Do I need to remove the hoe in order to...

I got myself a BX23. Same story as all the other new posters. Read a lot of information here as a lurker. Convinced the wife we need one of these to get all her projects done. I’m now in the process of relaying out the yard to accommodate the tractor. Pruning over hanging branches to clear...

I'm looking for a PTO Cement Mixer that will work on my BX23. The common one I find at the Carver and the Sweet site are not intended for my low to the ground tractor. Has anybody found something that worked for them? I've searched but I haven't found any "concrete" information.

The following link was sent by tractorsmart.com to help identify parts. Hope it helps others. http://www.tractorsmart.com/Books/BX23.htm

Top \'n Tilt for BX23 I'm likely buying a BX23 shortly and would like to get a Top 'n Tilt. It would be dealer installed. One dealer quoted $1400 for the Rankin TT225-3K installed with hoses: http://www.rankineqco.com/products/rankin/topandtiltkitsu10A.html I'd appreciate comments on the...

Mow\'n w/the BX23 Just checking in and reporting on my seldom used machine's performance. Gotta say the BX23 is one outstanding mowing machine. It fits around the humble abode just right. Any taller and the hills & dales would become perilous. Any heavier and the grass may not spring back up...

I've been working on a 24" pine stump since Saturday afternoon. I've spent a lot of time cutting the radial roots, and have most done to within 2' of the stump. But the going is getting tougher. I was just wondering if someone had any suggestions to assist me in getting this stump out of the...

Over the last 3 days, I've put in about 12 hours digging out a 24" pine stump. I know the roots on this thing are pretty stubborn, but I've begun to fell a little flexing of the deck(floor) of the backhoe during certain operations? Has anyone else noticed this? I double checked to make sure...

Oops. Saturday afternoon about 15:00 (after the dealer was closed and other local places were closed) I went to convert my BX23 from a mower to a digger. After removing the 60"MMM, I went to attach the FEL and, while being slightly distracted by my 5 year old asking questions, noticed that the...

As soon as the ground thawed I started digging with the BX23 to get a foundation hole dug for my new garage. It has been raining every weekend which has slowed down progress quite a bit but at least the rock harvest has been good. Attached is pic showing a big one that appeared to be grown to...

I've attached a picture of a broken front rubber seal near the front tire on my BX23. Both the left and right side seals are broken. Is this a difficult repair and were would I order the replacement part from. Had for 6-7 months and not sure if this is a warranty fix. Thanks

I have been sucking information from this site for over a year now and I finally made the decision to buy a BX23. A fellow member (TroyR57) posted a few weeks ago about the BX23 he was buying from a dealer (Patrick Miller Tractor Co.) in Winnfield, La. and listed the prices he was quoted. I...

I just put down my deposit on a new BX23 this weekend. I could not have done it with out all of you. I have spent hours reading all that you all have written on this site. I made my decission based on all your knowledge. I thank all of you for that. My wife is very understanding but I admit she...

I'm looking at getting a 4' rollover box blade (current Gill Model R1048 is listed at 606 pounds). I'm trying to figure out if I will have any problems using it on my BX23. Per the manual page 2 (Specifications of the Tractor), it says the max lift force of the 3PH is 1210 lbs at the lift...

Made a search for my specific question regarding these two models but cold not find anything so I decided to post to get some answers...My first question the BX as RPM of 3200.. GC at 2600 RPM does this mean the BX is louder at full throttle...Second question hydraulics pump output BX 5.5 GC 6.1...

Anyone had any experience with a bucket wider than 12 inches on the BH. I need to clean the edges of my pond bank. The dirt has sluffed into the pond due to waterfowl and now I have a levee that is becoming narrow at the top. I know they make a ditch cleaning bucket for larger tractors, but I...

Tried posting BX23 Workshop Manual to share. Despite system showing the attached file posted..it looks like it can not be downloaded.

I’m new to this forum so have mercy on me. I’m desperate for advice and the 0%/36 month financing deals are soon coming to an end, not to mention the grass already needs mowed. Keep in mind that I’m currently building a house and cost is a serious consideration. I’ve got 7 acres of land. 1.5...

Has anyone successfully installed a TNT system on a BX23, if so have the results been satisfactory? Have been attempting to use a box blade recently and can readily see the advantage of additional control features. Cheers John

Easy BX23 60\" MMM Removal / Installation Taking the advice of fellow posters I recently procured four three wheel casters. The antiscalp wheels fit perfectly into the caster recess allowing removal and installation of the MMM without swiveling the antiscalp wheels! I was able to position...

Bx23 60\'\' MMM belt. Found a piece of slag about the size of a pencil eraser embedded in the belt. It cut about half way through from the outside in. Wonder what effect if any that will have on the life of the belt?

Anyone else had trouble with theirs? It seems like when I get it on a bind it pops open more often. Is there an adjustment anyone has to share? I would be grateful for the info. Mike This is'nt the trpe of bind i'm talking about although I'm sure it came open.

Hello, Looking for a Kubota with both FEL and a Backhoe. If I were to buy new, I believe the BX23 would do the job. Have a need to some trenching for Conduit and Drain Tile around the small farmstead I have which is pushing me in that direction. Recently found a 1999 B7100 HSD with a Woods...

when using the backhoe yesterday I noticed a 3 to 4 inch paint bubble inside the bottom of the bucket and rust underneath. After digging some wet areas a couple of weeks ago I curled the bucket and later noticed water was resting in the buckle as the probable cause. Is this normal or do users...

Took a little while to do it but this big Sycamore stump is now history thanks to the BX23 . What a learning lesson it was. This tree was too close to the back of the house and since the house was built in the mid 60's, over years in the past the tree had allowed the grade to build up. (My...

OK, so this isn't very exciting. It turned out to be so funny that I just had to write about it. I had the BX23 for about 2 weeks and had only used the FEL. I figured it was about time to test the backhoe to make sure it was working. I have 3 boys who were badgering me to start digging...