3rd Function install Summary on DK40SE HST

   / 3rd Function install Summary on DK40SE HST
  • Thread Starter
#12  
Nice! Here's a bracket the dealer fabbed for my QDsView attachment 413567
Thanks for the picture
Just talking with a buddy at work that has a machine shop at his home. We were looking at doing the same thing, but I will most likely have the bracket turned 90 degrees so the QD's are facing toward the side of the tractor. I have plenty of slack in the Grapple lines to do this.
 
   / 3rd Function install Summary on DK40SE HST #13  
Yep, good idea, turning them. I havent had any issue keeping them plugged with either the QDs or the dust boots though, but good dealer, didnt even make me have to think about them.
 
   / 3rd Function install Summary on DK40SE HST #15  
Pretty good looking set-up.

I'm working on building out a 3rd function set-up myself. Not so much for doing it "cheaper" (although I'm thinking we'll save $150-$200 in the end) as much as doing it exactly like I want it (just picky like that).

I haven't really wanted to endure the down time to pull one of the "Banjo Bolts" in the power beyond line to get it's measurements so I was curious if you had / knew the specifics on the two adapters?

Thanks
 
   / 3rd Function install Summary on DK40SE HST #16  
Do you have a link to purchase this kit?
 
   / 3rd Function install Summary on DK40SE HST #17  
What hydraulic flow rate does the 3rd function flow?
 
   / 3rd Function install Summary on DK40SE HST #18  

Tractor & Equipment Auctions

2025 8ft Office Shipping Container (A49346)
2025 8ft Office...
2007 John Deere 1770NT CCS Planter (A50657)
2007 John Deere...
Char-Broil Gas Grill (A50860)
Char-Broil Gas...
2025 JMR 36in Bucket Mini Skid Steer Attachment (A49346)
2025 JMR 36in...
2020 John Deere XUV 835M Gator 4x4 Utility Cart (A49346)
2020 John Deere...
2011 Ford F-550 Iowa 1015 3,200LB Crane Mechanics Truck (A48081)
2011 Ford F-550...
 
Top