3rd Function install Summary on DK40SE HST

   / 3rd Function install Summary on DK40SE HST
  • Thread Starter
#12  
Nice! Here's a bracket the dealer fabbed for my QDsView attachment 413567
Thanks for the picture
Just talking with a buddy at work that has a machine shop at his home. We were looking at doing the same thing, but I will most likely have the bracket turned 90 degrees so the QD's are facing toward the side of the tractor. I have plenty of slack in the Grapple lines to do this.
 
   / 3rd Function install Summary on DK40SE HST #13  
Yep, good idea, turning them. I havent had any issue keeping them plugged with either the QDs or the dust boots though, but good dealer, didnt even make me have to think about them.
 
   / 3rd Function install Summary on DK40SE HST #15  
Pretty good looking set-up.

I'm working on building out a 3rd function set-up myself. Not so much for doing it "cheaper" (although I'm thinking we'll save $150-$200 in the end) as much as doing it exactly like I want it (just picky like that).

I haven't really wanted to endure the down time to pull one of the "Banjo Bolts" in the power beyond line to get it's measurements so I was curious if you had / knew the specifics on the two adapters?

Thanks
 
   / 3rd Function install Summary on DK40SE HST #16  
Do you have a link to purchase this kit?
 
   / 3rd Function install Summary on DK40SE HST #17  
What hydraulic flow rate does the 3rd function flow?
 
   / 3rd Function install Summary on DK40SE HST #18  

Tractor & Equipment Auctions

2017 Snapper Pro 48in Zero Turn Commercial Mower (A51691)
2017 Snapper Pro...
UNUSED FUTURE MINI SKID STEER HYD 4IN1 BUCKET (A51244)
UNUSED FUTURE MINI...
(8) TRACTOR WEIGHTS (A51244)
(8) TRACTOR...
2015 FREIGHTLINER CASCADIA DAYCAB (A50854)
2015 FREIGHTLINER...
2008 Mazda CX9 (A50324)
2008 Mazda CX9...
2014 MACK ELITE LEU613 GARBAGE TRUCK (A51243)
2014 MACK ELITE...
 
Top