Building a Garage Pit

   / Building a Garage Pit #72  
Hello folks,
I'm brand new to these Subaru Outback forums, so please excuse me if I initiated this thread in the wrong place.

I'm considering building inspection / maintenance pit in my existing garage.
It has 6" concrete floor through which I intend to cut with the circular saw for masonry.
Could somebody please share his thoughts, ideas or precautions on how to build the inspection pit safely and in the most inexpensive way. Surprisingly, I could not find any information on pre-formed fiber glass pit liners in the US which would make my task much easier.

Thank you in advance for any thought or advices.

This is NOT a Subaru Outback forum and you are posting a reply to a six year old thread.
 
   / Building a Garage Pit #73  
I like it when an old thread gets brought back to life, quite the mistake for this one to be re-opened, Subaru's


:ROFLMAO:
 
   / Building a Garage Pit #74  
That's just a pitfall of using the internet. :ROFLMAO:
 
   / Building a Garage Pit #76  
And I like lube pits and have one
 
   / Building a Garage Pit #77  
Wow, we have really gone downhill to be talking about Subarus..... :ROFLMAO:

I have always contemplated building an outside pit for servicing the vehicles. I couldn't justify the cost vs the time just to do the work on the ground or floor.
 
   / Building a Garage Pit #78  
I am 80 years old but when I was 15 started as an apprentice car mechanic. The shop had large pits with stairs built in and worked out well for repairs. When the owners were away the 3 apprentices took turns to see who could drive fastest and make a 90 degree turn ending up over the pit without dropping in a wheel. All was fun until someone dropped in a new Mercedes in the pit
 
   / Building a Garage Pit #79  
I have a perfect spot at my property for some of those drive on ramps built on a hillside, one of these days I might makew something like that.
 
   / Building a Garage Pit #80  
so yeah, old thread. sorry, had to float it up.

found this like I found a video of a guy who built on from bin blocks (aka mafia blocks). I can see the video in my minds eye but cannot for the life of me find it online. looked at all my history, etc. nothing. pls tell me you've seen it TbN forum folk!

O.
 

Tractor & Equipment Auctions

2013 ORTEQ ENERGY GN182 GOOSENECK HOSE TRAILER (A55745)
2013 ORTEQ ENERGY...
BOMAG BW75AD WALK BEHIND SMOOTH DBL DRUM ROLLER (A52707)
BOMAG BW75AD WALK...
2014 Cummins ISL 320HP 8.9L 6-Cylinder Turbo Diesel Engine (A55852)
2014 Cummins ISL...
2015 Ford F-750 Stellar 10628 10,000LB 5 Ton Mechanics Crane Truck (A55852)
2015 Ford F-750...
MASSAGE CHAIR (A55745)
MASSAGE CHAIR (A55745)
Freighliner Tender Truck (A55315)
Freighliner Tender...
 
Top