Buying Advice JD 4300 questions

   / JD 4300 questions
  • Thread Starter
#11  
I found the oil almost in the center of the tractor underneath where the floorboard would be located.
 
   / JD 4300 questions #12  
That could be a loose filter or suction screen mount and clamp. But if you have doubts, keep searching.
 
   / JD 4300 questions
  • Thread Starter
#13  
I spoke to the dealer that has this tractor and he has had it looked at since I pointed the leak out to him. The report is that the leak was coming from a "plate" underneath the tractor and they have had it fixed.

Any ideas what this could mean?
 
   / JD 4300 questions #14  
Part #9 maybe?
 

Attachments

  • MP40402________UN02NOV07.gif
    MP40402________UN02NOV07.gif
    30.8 KB · Views: 180
   / JD 4300 questions
  • Thread Starter
#15  
arabil. you were correct. It was the part that you indicated. They replaced the gasket.

Thanks to everyone for their help and answers!

I am now the owner of a John Deere 4300!!! It is being delivered Friday.

Would the dealer be the best place to get an operators manual or should I buy it online somewhere?
 
   / JD 4300 questions #16  
Hmmm. While I like to be correct and all, plate #9 doesn't have a gasket. Did they mean a liquid gasket/sealant? Cause if not, then it couldn't have been what I said.... :)
 
   / JD 4300 questions #17  
Hmmm. While I like to be correct and all, plate #9 doesn't have a gasket. Did they mean a liquid gasket/sealant? Cause if not, then it couldn't have been what I said.... :)

That plate might be a little warped...necessitating a gasket of some sort.
 
   / JD 4300 questions #18  
arabil. you were correct. It was the part that you indicated. They replaced the gasket.

Thanks to everyone for their help and answers!

I am now the owner of a John Deere 4300!!! It is being delivered Friday.

Would the dealer be the best place to get an operators manual or should I buy it online somewhere?

Congrats! Why buy it when it's free:thumbsup: Click the link below

Introduction
 
   / JD 4300 questions #19  
necessitating a gasket of some sort.
It had to be sealed to the housing no matter what if it was to hold fluid in. I rarely hear sealant referred to as a gasket is all.
 
   / JD 4300 questions
  • Thread Starter
#20  
Thanks for the link.

I guess "gasket" may have been my slip. The dealer did say that they used sealant.
 

Tractor & Equipment Auctions

2013 Chevrolet Impala Sedan (A48082)
2013 Chevrolet...
2018 JLG 4045R 40FT. Scissor Lift (A49346)
2018 JLG 4045R...
2015 FREIGHTLINER  CASCADIA (INOPERABLE) (A50854)
2015 FREIGHTLINER...
2024 Jisan JS280RT Rotating Hydraulic Demolition Shear Excavator Attachment (A49346)
2024 Jisan JS280RT...
2019 Ford Transit 150 Cargo Van (A48081)
2019 Ford Transit...
Gravely ZT2350 Zero Turn Mower (A50860)
Gravely ZT2350...
 
Top