Buying Advice JD 4300 questions

   / JD 4300 questions
  • Thread Starter
#11  
I found the oil almost in the center of the tractor underneath where the floorboard would be located.
 
   / JD 4300 questions #12  
That could be a loose filter or suction screen mount and clamp. But if you have doubts, keep searching.
 
   / JD 4300 questions
  • Thread Starter
#13  
I spoke to the dealer that has this tractor and he has had it looked at since I pointed the leak out to him. The report is that the leak was coming from a "plate" underneath the tractor and they have had it fixed.

Any ideas what this could mean?
 
   / JD 4300 questions #14  
Part #9 maybe?
 

Attachments

  • MP40402________UN02NOV07.gif
    MP40402________UN02NOV07.gif
    30.8 KB · Views: 191
   / JD 4300 questions
  • Thread Starter
#15  
arabil. you were correct. It was the part that you indicated. They replaced the gasket.

Thanks to everyone for their help and answers!

I am now the owner of a John Deere 4300!!! It is being delivered Friday.

Would the dealer be the best place to get an operators manual or should I buy it online somewhere?
 
   / JD 4300 questions #16  
Hmmm. While I like to be correct and all, plate #9 doesn't have a gasket. Did they mean a liquid gasket/sealant? Cause if not, then it couldn't have been what I said.... :)
 
   / JD 4300 questions #17  
Hmmm. While I like to be correct and all, plate #9 doesn't have a gasket. Did they mean a liquid gasket/sealant? Cause if not, then it couldn't have been what I said.... :)

That plate might be a little warped...necessitating a gasket of some sort.
 
   / JD 4300 questions #18  
arabil. you were correct. It was the part that you indicated. They replaced the gasket.

Thanks to everyone for their help and answers!

I am now the owner of a John Deere 4300!!! It is being delivered Friday.

Would the dealer be the best place to get an operators manual or should I buy it online somewhere?

Congrats! Why buy it when it's free:thumbsup: Click the link below

Introduction
 
   / JD 4300 questions #19  
necessitating a gasket of some sort.
It had to be sealed to the housing no matter what if it was to hold fluid in. I rarely hear sealant referred to as a gasket is all.
 
   / JD 4300 questions
  • Thread Starter
#20  
Thanks for the link.

I guess "gasket" may have been my slip. The dealer did say that they used sealant.
 

Tractor & Equipment Auctions

2007 MACK CTP713 TRI AXLE DUMP TRUCK (A59575)
2007 MACK CTP713...
(APPROX. 20) 4' X 8' X 3/8" SHEETING (A52706)
(APPROX. 20) 4' X...
ALLMAND NIGHT-LIGHT PRO 4 BULB LIGHT PLANT (A52706)
ALLMAND...
EZ-GO Utility Cart (A55851)
EZ-GO Utility Cart...
White 6138 Planter (A59814)
White 6138 Planter...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
 
Top