My 4710

Bird · Mar 9, 2002

<font color=blue>my identical twin -- Bird</font color=blue>

Then why do I look so much older; must be the high mileage.

PLOWER · Mar 9, 2002

oops, I have no idea how I pulled that one off, I feel dumb/w3tcompact/icons/smile.gif.

Harv · Mar 9, 2002

<font color=blue>why do I look so much older</font color=blue>

Remember, Bird, the computer adds 20 years and 10 lbs. In real life we both look like the younger version of Mel Gibson.

Bird · Mar 9, 2002

Hey, I took it as a compliment, Cliff./w3tcompact/icons/wink.gif

Bird · Mar 9, 2002

Well, we can dream anyway, Harv./w3tcompact/icons/wink.gif

Anonymous Poster · Mar 11, 2002

How wide is the 4710. I have a 6x12 trailer with sides and wondered if it would fit. Thanks

Anonymous Poster · Mar 11, 2002

Is that a safety clamp for the FEL below the grill guard? Can it be released from the drivers seat?

TerryinMD · Mar 11, 2002

If it is like the one on the 4100, yes it just below the grill guard and is clamped down by a pin. You must leave the seat to move the safety latch.

Terry

PLOWER · Mar 11, 2002

my 4710 would not fit, because I have the tires spaced out. But if you had them in the narrowest setting it would fit. Cliff

JTD · Mar 11, 2002

Overall width depends on tire type and how wide you have them set.
Minimum width w/ R1 62 in
Maximum width w/ R1 91.1 in

Minimum width w/ R3 71.5 in
Maximum width w/ R3 74.4 in

Minimum width w/ R4 71.5 in
Maximum width w/ R4 92.6 in

I think there's also another ag tire with a different profile available now discussed by John Miller in another thread. These are the 4700 specs but I believe that they are the same for the the 4710. There'll be a slight variation with tire pressure and attachment load on the 3PH. R1s you could fit with a couple of wheel setups. Pretty tight for the R3s and R4s in their narrowest configurations.