Bird
Rest in Peace
<font color=blue>my identical twin -- Bird</font color=blue>
Then why do I look so much older; must be the high mileage.
Then why do I look so much older; must be the high mileage.
My 4710
- Thread starter PLOWER
- Start date
- Views: 3483
Harv
Elite Member
- Joined
- Aug 22, 2000
- Messages
- 3,346
- Tractor
- Kubota L2500DT Standard Transmission
<font color=blue>why do I look so much older</font color=blue>
Remember, Bird, the computer adds 20 years and 10 lbs. In real life we both look like the younger version of Mel Gibson.
Remember, Bird, the computer adds 20 years and 10 lbs. In real life we both look like the younger version of Mel Gibson.
Bird
Rest in Peace
Hey, I took it as a compliment, Cliff./w3tcompact/icons/wink.gif
Bird
Rest in Peace
Well, we can dream anyway, Harv./w3tcompact/icons/wink.gif
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
How wide is the 4710. I have a 6x12 trailer with sides and wondered if it would fit. Thanks
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Is that a safety clamp for the FEL below the grill guard? Can it be released from the drivers seat?
TerryinMD
Veteran Member
If it is like the one on the 4100, yes it just below the grill guard and is clamped down by a pin. You must leave the seat to move the safety latch.
Terry
Terry
Overall width depends on tire type and how wide you have them set.
Minimum width w/ R1 62 in
Maximum width w/ R1 91.1 in
Minimum width w/ R3 71.5 in
Maximum width w/ R3 74.4 in
Minimum width w/ R4 71.5 in
Maximum width w/ R4 92.6 in
I think there's also another ag tire with a different profile available now discussed by John Miller in another thread. These are the 4700 specs but I believe that they are the same for the the 4710. There'll be a slight variation with tire pressure and attachment load on the 3PH. R1s you could fit with a couple of wheel setups. Pretty tight for the R3s and R4s in their narrowest configurations.
Minimum width w/ R1 62 in
Maximum width w/ R1 91.1 in
Minimum width w/ R3 71.5 in
Maximum width w/ R3 74.4 in
Minimum width w/ R4 71.5 in
Maximum width w/ R4 92.6 in
I think there's also another ag tire with a different profile available now discussed by John Miller in another thread. These are the 4700 specs but I believe that they are the same for the the 4710. There'll be a slight variation with tire pressure and attachment load on the 3PH. R1s you could fit with a couple of wheel setups. Pretty tight for the R3s and R4s in their narrowest configurations.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 21,059
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Bird - <font color=blue>Congratulations, Cliff. That really is a step up!</font color=blue>
Cliff, I don't know if that's what Bird meant, but now you do have a an extra step to get onto the operator's platform. Those are two very, very impressive machines. The hardest job may be trying to decide which one to use. /w3tcompact/icons/smile.gif
Cliff, I don't know if that's what Bird meant, but now you do have a an extra step to get onto the operator's platform. Those are two very, very impressive machines. The hardest job may be trying to decide which one to use. /w3tcompact/icons/smile.gif
