New Barn

   / New Barn #41  
2014-11-22_14-02-06_359.jpgThis is what sil is building. All the standing walls were built and erected Sat. Him and I did some prework and he laid out the plate and built the headers Friday and I cut 76 2x4's to 11' 9''.Him and 5 other mostly carpenters had this all erected by 1:30p and they started at 7am! It's 35x50 on poured foundation with 3 man doors,2 overhd and 3 wndws.
 
   / New Barn #45  
It looks like the horses are wondering if you could leave the door open on that tonight.:)
 
   / New Barn #46  
Looking good.
 
   / New Barn #47  
more<img src="http://www.tractorbynet.com/forums/files/projects/399369-new-barn-4-jpg"/>

Very nice looking. Good job!
 
   / New Barn #48  
<img src="http://www.tractorbynet.com/forums/files/projects/399907-new-barn-2014-11-22_14-02-06_359-a"/>This is what sil is building. All the standing walls were built and erected Sat. Him and I did some prework and he laid out the plate and built the headers Friday and I cut 76 2x4's to 11' 9''.Him and 5 other mostly carpenters had this all erected by 1:30p and they started at 7am! It's 35x50 on poured foundation with 3 man doors,2 overhd and 3 wndws.

Impressive. Good job!
 
   / New Barn #50  
Impressive. Good job!
They're going to set trusses this Saturday. There is also a 15x35 open carport like area on one end and 3 of us put up the 3 laminated beams on temp posts and dug and poured 3 piers using 12" dia sono tubes and poured concrete in them which required 16 bags of pre-mix. The trusses are dropped down 2' from main building on this part. It's looking real good at this point and the weather is moderating and sat looks like go time.
 

Tractor & Equipment Auctions

UNUSED X-STAR 101" X 20' LOADING RAMP (A51247)
UNUSED X-STAR 101"...
2015 John Deere 410L 4x4 Extendahoe Backhoe Loader (A55787)
2015 John Deere...
2019 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A54607)
2019 FREIGHTLINER...
MISC CABINETS FLOORING (A54757)
MISC CABINETS...
Giyi Telescopic Boom (A53316)
Giyi Telescopic...
Plasmarc PM150 Plasma Cutter (A51691)
Plasmarc PM150...
 
Top