telescoping links for B7800
- Thread starter BlacknTan
- Start date
- Views: 5387
-
- Tags
- kubota b7800
Ronzonie
New member
riptides
Super Member
Henro makes a very important point a lot of us overlook on the B7800.
</font><font color="blue" class="small">( One thing that IS better on the B7800 relates to use of a PHD. The B7800 has a foot operated clutch, which allows one to start/stop the PTO with the foot, while twisted around looking at the PHD and lowering it with the 3PH control lever.
)</font>
Old school me, IMHO is how one starts and engages equipment, with the clutch.
I agree the 2910/3030's have all the comforts and nice features that make a persons life easier, BUT this depends on what your doing with it.
I have used the B7800 locking cruise control for pasture mowing. I end up sweating more than worring about setting it. I cannot compare it to what I don't have, but it works just fine.
I don't grade or do fine positioning, and quite frankly, bushhogging to me is not something that requires a positioning control, I can use checkchains or my eyeball.
On the turnbuckles, hey, I feel your going to bend one sooner or later, so yes, the turnbuckles may have to be swapped out.
To me, the debate is over features, but each person will have a use for the feature.
The only thing I can add, is in the long term, many years, a couple of thousand bucks is a wash, if you like the machine and it has met your needs.
Good luck, ALL are fine quality products.
-Mike Z.
</font><font color="blue" class="small">( One thing that IS better on the B7800 relates to use of a PHD. The B7800 has a foot operated clutch, which allows one to start/stop the PTO with the foot, while twisted around looking at the PHD and lowering it with the 3PH control lever.
)</font>
Old school me, IMHO is how one starts and engages equipment, with the clutch.
I agree the 2910/3030's have all the comforts and nice features that make a persons life easier, BUT this depends on what your doing with it.
I have used the B7800 locking cruise control for pasture mowing. I end up sweating more than worring about setting it. I cannot compare it to what I don't have, but it works just fine.
I don't grade or do fine positioning, and quite frankly, bushhogging to me is not something that requires a positioning control, I can use checkchains or my eyeball.
On the turnbuckles, hey, I feel your going to bend one sooner or later, so yes, the turnbuckles may have to be swapped out.
To me, the debate is over features, but each person will have a use for the feature.
The only thing I can add, is in the long term, many years, a couple of thousand bucks is a wash, if you like the machine and it has met your needs.
Good luck, ALL are fine quality products.
-Mike Z.
riptides
Super Member
Henro makes a very important point a lot of us overlook on the B7800.
</font><font color="blue" class="small">( One thing that IS better on the B7800 relates to use of a PHD. The B7800 has a foot operated clutch, which allows one to start/stop the PTO with the foot, while twisted around looking at the PHD and lowering it with the 3PH control lever.
)</font>
Old school me, IMHO is how one starts and engages equipment, with the clutch.
I agree the 2910/3030's have all the comforts and nice features that make a persons life easier, BUT this depends on what your doing with it.
I have used the B7800 locking cruise control for pasture mowing. I end up sweating more than worring about setting it. I cannot compare it to what I don't have, but it works just fine.
I don't grade or do fine positioning, and quite frankly, bushhogging to me is not something that requires a positioning control, I can use checkchains or my eyeball.
On the turnbuckles, hey, I feel your going to bend one sooner or later, so yes, the turnbuckles may have to be swapped out.
To me, the debate is over features, but each person will have a use for the feature.
The only thing I can add, is in the long term, many years, a couple of thousand bucks is a wash, if you like the machine and it has met your needs.
Good luck, ALL are fine quality products.
-Mike Z.
</font><font color="blue" class="small">( One thing that IS better on the B7800 relates to use of a PHD. The B7800 has a foot operated clutch, which allows one to start/stop the PTO with the foot, while twisted around looking at the PHD and lowering it with the 3PH control lever.
)</font>
Old school me, IMHO is how one starts and engages equipment, with the clutch.
I agree the 2910/3030's have all the comforts and nice features that make a persons life easier, BUT this depends on what your doing with it.
I have used the B7800 locking cruise control for pasture mowing. I end up sweating more than worring about setting it. I cannot compare it to what I don't have, but it works just fine.
I don't grade or do fine positioning, and quite frankly, bushhogging to me is not something that requires a positioning control, I can use checkchains or my eyeball.
On the turnbuckles, hey, I feel your going to bend one sooner or later, so yes, the turnbuckles may have to be swapped out.
To me, the debate is over features, but each person will have a use for the feature.
The only thing I can add, is in the long term, many years, a couple of thousand bucks is a wash, if you like the machine and it has met your needs.
Good luck, ALL are fine quality products.
-Mike Z.
DAP
Veteran Member
- Joined
- Nov 28, 2001
- Messages
- 1,180
- Tractor
- JD LX288 and a B7800
I'll just say this.
Clutch.
And this ...
Pat's Easy Change.
and finally this.
one thousand 8 hundred U.S. dollars.
Clutch.
And this ...
Pat's Easy Change.
and finally this.
one thousand 8 hundred U.S. dollars.
DAP
Veteran Member
- Joined
- Nov 28, 2001
- Messages
- 1,180
- Tractor
- JD LX288 and a B7800
I'll just say this.
Clutch.
And this ...
Pat's Easy Change.
and finally this.
one thousand 8 hundred U.S. dollars.
Clutch.
And this ...
Pat's Easy Change.
and finally this.
one thousand 8 hundred U.S. dollars.
v8dave
Platinum Member
Here is a link to some pictures of changing the stabilizer changing from chains to telescoping draw bar.
v8dave
Platinum Member
Here is a link to some pictures of changing the stabilizer changing from chains to telescoping draw bar.
v8dave
Platinum Member
Looks like the price has gone up from $100 to $136 since I made the change. It is still worth it.
v8dave
Platinum Member
Looks like the price has gone up from $100 to $136 since I made the change. It is still worth it.