TODAYS SEAT TIME

[4570Man]

I put a back blade on the B7200 and cleaned up my wood lot.

 

[aarolar]

Delt with some old dead trees in the yard and rolled a rotted stump up.

 

[Larro Darro]

View attachment 461585

It took me a few seconds to realize that was a dog in the picture and not a dirt clod:laughing:

 

[aarolar]

Removed the other one too but it was a major pain compared. Took a lot of digging and axe work.



Before


After

 

[lukinfucas]

Started the day off finally burning down the wood pile



Then moved over to continue clearing fence line using the loader bucket as a very expensive wheelbarrow.



Time to till under the sod to make a new garden. Just got the tractor/tiller so plan on tilling every few days for a couple weeks to kill the sod. Hope it works!!

All in all, probably put 1.5 hours in on the tractor today.

 

[lukinfucas]

And.....any tips on how to properly till so I don't leave low spots at the start/finish of the garden would be great!!! Can't seem to figure that one out yet

 

[aarolar]

Slowly raise and slowly lower while moving. If you stop and plunge then stop and raise it'll do that every time.

 

[farmer2009]

When you get to the end of a pass don't stop. Pickup on the move. Then alternate directions. It'll only minimize the low spots, no way to eliminate them.

 

[dieselcrawler]

Took the wife out on the 4wheeler this afternoon on a timber scouting ride... found this:



Sure wish I woulda seen that big boy during deer season. My neighbor said he wounded one, tracked it into my fields and lost trail... this might have been it.

I took the tractor down to the other field after that, cut some more locust... couple 16', limbed out another I had down, skidded some up the hill when I came up.

 

[4570Man]

And.....any tips on how to properly till so I don't leave low spots at the start/finish of the garden would be great!!! Can't seem to figure that one out yet

I usually run one pass at the end of the row 90 degrees to the rest of the passes. It still leaves a low spot, but only 1.