Hi folks...gravelman here.. i have a 17" deckover trailer...was thinking of building/buying some type of lightweight sideboards..nothing tall , just something to contain loose items if i ever haul something like that... fire wood etc. I could probably make it out of wood, stakes with a rail. Just wondering if anyone has seen them for sale or has made them etc. thanks
trailer sideboards..
- Thread starter gravelman
- Start date
- Views: 16195
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 13,325
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
yup
In the beginning
stage1
stage2
final
Put together with flat U bolts can convert to any of the three forms.
Reads like you want stage 1.
In the beginning
stage1
stage2
final
Put together with flat U bolts can convert to any of the three forms.
Reads like you want stage 1.
flingwing1969
Platinum Member
- Joined
- Jun 2, 2008
- Messages
- 694
- Tractor
- LS G3038, JD GT275, and Bolins H16
Nice.
Fallon
Super Member
Don't seem to have any photos of it together, but i built sides for my old trailer. Bolted stake pockets to the trailer and cobbled up some sides out of 2x, plywood & some brackets off Amazon. I was only hauling under a dozen loads of aged manure a mile or to on dirt roads at 15-20mph tops so I wasn't too worried about structural integrity beyond not falling apart on me right away.
"trailer stake brackets" should find you the brackets, latches & pockets on Amazon. A tailgate holds the sides together almost as much as keeping crap (in my case literally) from falling out the back.
"trailer stake brackets" should find you the brackets, latches & pockets on Amazon. A tailgate holds the sides together almost as much as keeping crap (in my case literally) from falling out the back.
timswi
Elite Member
- Joined
- Nov 18, 2008
- Messages
- 4,997
- Location
- Beaver County Pa
- Tractor
- Kubota BX23 TLB, Kubota RTV1100, Kubota Z724 & Polaris RZR 900 Trail
Nice---Maybe get a length of vacuum line to place over the ubolt studs--Them will leave a mark.
lennyzx11
Veteran Member
- Joined
- Dec 20, 2015
- Messages
- 1,132
- Location
- Bennington Vermont
- Tractor
- Kubota L3301 HST/LA525 & 1964 Ford 2000 gas
Newbury, I'm working my way into this project now. Very similar to your stage 3.
Any advice or shoulda dones looking back at yours?
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,132
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
I used a 2x12 on each side with 2x4s in the stake pockets on my 18' car hauler trailer. That works great for loose material and firewood, and they lift out easily if I need them gone.
