Welding table build

[CDN Farm Boy]

Here's a free download that I use all the time to estimate weight of a finished project

http://www.farweststeel.com/content/misc_uploads/FWS_Standard_Weights_and_Gauges1.pdf

Save a copy to your computer and you won't even have to go online to use it - works fer me... Steve

Got a chance to have a look at this, very useful. Fortunately (for me), my steel supplier has similar tables in their order catalogue.

I just totaled things up and am currently sitting at 834 lbs plus the bolts attaching the wheels, the 2 large bolts & nuts for the leveler feet and whatever amount of weld material was added which will put it close to 850 lbs. The cutting slats, by rough count, will add another 80 lbs or so bringing the total to right around 930 lbs before I add the lower shelf (whenever I get around to it). I'm pretty happy with that.

 

[CDN Farm Boy]

Thanks for the explanation. You have thought this out. I wouldn't have thought of doing it.

Thanks for the compliment.

I'm blessed (or is that cursed?) with a mind that lets me see a great deal of different options and how they relate to each other.

 

[Arc weld]

No guessing allowed.:devil: Get the Procedure handbook and read up on how to measure the weight of weld metal deposited.

DISCLAIMER! Mathematicians may be required or your head could spin. :hissyfit:

 

[CDN Farm Boy]

No guessing allowed.:devil: Get the Procedure handbook and read up on how to measure the weight of weld metal deposited.

DISCLAIMER! Mathematicians may be required or your head could spin. :hissyfit:

I looked up that book, it's bloody expensive! Not that it's not worth it but $100 give or take is a lot. Got any suggestions where to get it for a reasonable price?

I'm pretty good with math but my oldest has a degree in Astro Physics and heading for likely Aerospace Engineering for his masters if it's over my head......

 

[Shield Arc]

Member here Tractor Seabee just bought the Procedure Handbook from Lincoln. He said the same thing, the book was outrageous every where else.
Books

 

[CDN Farm Boy]

Member here Tractor Seabee just bought the Procedure Handbook from Lincoln. He said the same thing, the book was outrageous every where else.
Books

Thanks for that. $25, now that's a reasonable price. 750 pages, must be some good stuff in it.

 

[Shield Arc]

must be some good stuff in it.

Ever since I can remember, it's been called the Bible of welding.

 

[DXN1EL]

Do you have the U.S Army TC 9-237

 

[Arc weld]

As much as the Army thinks, I really doubt they know more about welding than Lincoln. Now if you really want to get into the encyclopedia of welding, gather up several thousand dollars and purchase all the code volumes! Lincoln used to advertise that the Procedure Handbook was purposely sold at a low cost so it was affordable to anyone. Most other 750 page hard cover reference books would cost $100's.

 

[Shield Arc]

Now if you really want to get into the encyclopedia of welding, gather up several thousand dollars and purchase all the code volumes!

Boy that's the truth!