Yanmar YM Series Tractor Toolboxes

[California]

Let’s see pictures of the toolbox and where it’s mounted on your Yanmar YM Series tractor.

You might get some ideas from these photos. Not as pretty as the preceding photos!

I cobbled a plastic toolbox onto the Quick Hitch for one project. I've thought about welding on an ammo can there. But anything there interferes with reaching down to engage a PTO driveshaft.

What I use presently is a wire basket zip-tied to the top of the loader control.

This photo of the temporary toolbox was before I welded a bar magnet along the top edge of the QH, for pins and clips while hitching up.

There is PVC pipe lashed to the left loader pedestal to carry a shovel, rake, hoe. Or my long handle pruner.

On the larger YM240 with ROPS I lashed on golf bags. More recently there are also small canvas shopping bags lashed to each upright using hose clamps, for water bottle etc.

This red bag carries two 8ft chains with their hooks engaged over the top lip. Plus whatever tool is needed that day. Often the long-handle pruner.

 

[bmaverick]

Some other DIY ideas,

NOTE, Do Not drill holes into the ROPS. It weakens the structure and will void Fredricks warranty. Likewise, it will remove liability from any ROPS offering manufacture too.

 

[bmaverick]

Two ammo cans painted Yanmar red and right behind the seat.

 

[California]

I should add that the YM240 has the same OEM small flat toolbox as Carey's photo (Post #2 above), on the transmission tunnel in front of the shifter.

Don't you guys ever take your gorgeous flawless tractors outdoors?

 

[tacticalturnip]

What a fun thread; I always found it cool Yanmar actually included tools in their toolbox.

 

[Travis_R]

For the YM2500, Travis found this in the YM2500/YM3000 manual. Held on with a single bolt. Not something I would like to have mounted that way.

View attachment 3681988

IF you want a toolbox today, Yanmar still offers it! Ask for the YM336 toolbox.

Shop FENDER & SEAT (COLUMN SHIFT:A) (YM336D(COLUM) today | Yanmar US

Find products in FENDER & SEAT (COLUMN SHIFT:A) (YM336D(COLUM) today | Yanmar US

www.buyyanmar.com

View attachment 3681989

Excellent information Bret!!

 

[Travis_R]

Org. All the little stuff! Pins,Pliers etc.. Big Box to the 3Pt.. Seen one on a Quick Hitch. Easy to access and attach a big tool box to. Red box at the shifter.

Attachments

• 
  Picture 015.jpg

  2.6 MB · Views: 367

Carey, this is exactly what I’m looking for and exactly where I want it mounted.

 

[YanmarFever]

When I moved I had to clear out the shop of all my Yanmar goodies, I must of had over 100 lbs of yanmar wrenches, pliers and screwdrivers, along with the tire irons and crazy keychains with bells on them.
Not only that but I had to dispose of a dumpster partially filled with yanmar cabs, tiller bkts, red wheels, and 13 broken tillers.

California, I remember when the vietnamese tractors splashed on the scene, they gave everyone a tough time for a while, remember Buck from EFC?
He went to Japan to visit the vietnam suppliers, and took pictures of their tractors.

I still have Virginia with a finishing mower attached (FX235-D)

My wife called me the Yanmar horder! It was fun while it lasted..

 

[California]

I hope all those small tools and parts made it from the left coast down to Hoye's!

Were 3-point rototillers slow sellers? I thought they should sell well.

Yes, I remember Buck's posts here. In particular, he said when visiting the Japanese salvage yards, buyers for the VN refurb factories might as well just turn a 20ft ocean can on end and pour in junk tractors and parts until it was full, to get whatever was needed to complete their 'rebuilts'.

Also Buck noted US buyers were a tiny part of the overall market for used tractors. As he was reviewing a row of trade-in tractors looking for choice ones, he said an Iranian(?) glanced around then said 'I'll take that row over there. Lets get lunch".

Did he select some for you? For Wayne? Or for Dave in NorCal?

 

[YanmarFever]

I had a Japanese friend who would pick out our tractors, he negotiated the price down and picked the cream of the crop.
I would arrange shipping here to the states.
As far as the tools, I scraped them out to a recycler, along with all the tillers. All the tractors and parts went to Hoyes.

Its to bad Yanmar lowered the boom on the imports, it was fun while it lasted.