This is my first time owning and maintaining a tractor. It started leaking from the the hydraulic fluid drain port. Does the sealing shim need to be changed with each UTD fluid replacement? I...

The smaller BXs just don't have the weight / hydraulic down force in any 3-point hitch mounted implement I know of to dig out rocks / stumps / buried pipe / etc. My property is very rocky and box...

Don't know what else to call it. We are dumping our non-burnable plant compost from the garden / yard down a small hill in the back every year. This amounts to a land fill (yes we have other...

Both subcompact, JD is a bit heavier and more hp. Both less than 300 hrs. Any benefit to one over another? Or mostly brand loyalty? Thank you.

Hello all! New to me BX2370. No issues when I first got it. First thing I did was change all filters and fluids. Issue I am having now is that when it sits a day or two, I start it, it runs a few...

Need some mower deck help with my BX2370. Just acquired it from the original owners family. It had sat a while. It has a 60” Drive over deck. The deck height knob was frozen and I was able to...

Hello! I am looking to pick up a used BX2370 locally. It was well maintained, low hour. It has say for a while. Runs, drives perfect. I will do a full service on it ASAP. Only flaw I found was...

Hello All. I have a 2016 BX2370 that is mainly used as a lawnmower, but occasionally I attach our 4 foot brush hog to it and use it on steep areas. I have turf tires on the tractor when lawn...

The first shot at this is a Landscape Rake: LandPride or ETS run $600 - $800 even for the 48" width I will be limited to. I am willing to spend the money but wonder if that is the best approach...

Yesterday my BX would not start - made clicking noises. Plugged jumper cable into my winch power connector...

It can be done!! With the forks on the bucket I can get under the bale and tilt back slightly, the forks then act like a sled across the paddocks, 4WD is a must as the back wheels come up...

I sold my brother who lives next door my 50 hour BX2370-1 and bought a used 99 hours Z724X from Barlows. I was testing the Z on some steep hillsides behind and beside my brothers house and was...

Can someone tell me what the recommended idle speed is for the BX 2370? Thanks, Barney

Replaced the trans filter at 50 hours, as specified in the owner's manual. What a PIA to remove this filter. I used a pair of wide opening channel lock pliers to remove the old filter. Buggered...

Howdy. I'm new here and would appreciate some opinions. I'm looking at a BX2370, brand new from a dealer and taking advantage of the 0% financing they're offering. Includes 2 year bumper to bumper...

I'm looking to possibly purchase a 2013 Kubota BX2370 that has 225 hours on it, Mid and Rear PTO, 60" mower, and a 60" rear blade. I'm hoping to use this to mow the lawn (the primary use) and use...

I have an issue with the mower deck dropping to a lower setting while mowing... Dealer changed the mower link cam...now its worse than before... Stopped at dealer today they said I need to...

Hi all, I own a 2014 BX2370 with 60" deck, FEL, and rear blade with approximately 200 hours. I'm going to be moving and will unfortunately no longer need it and was looking to sell it. Never...

Hello. Looking to see if anyone has added remote or extra battery cables or attachment points on a BX2370 (or similar model). I am running one of the "Countyline" 30 gallon sprayers strapped to...

Steve Barlow delivered the new BX2370-1 a couple days ago. My wife and Grandson used it first :D which is why I bought it. Some help with mowing!:cool2: She told me later that it sure rode rough...

Toying with the idea of purchasing a 3pt Boom Pole for my Kubota BX2370. The spec sheet says 680lbs lift capacity at 24" behind pin. That probably means I need at least a 1000lb capacity Boom...

After 5 months of it sitting in the garage, I FINALLY got around to installing it today. Don't know why I kept putting it off. Took about 5 minutes. I used a Dewalt Industrial Cobalt bit to...

I have a Honda HRX217HYA and walk-behind trimmer. I'm on less than an acre. The Honda and Husqvarna are working out well for me. There is a ~17.5 acre undeveloped open-space behind me...

I've just listed my L2900 GST for sale on C/L and want a newer, smaller Kubota. I found 2 candidates. Thoughts and advice... The B2910 is a 2009 has 809 hours, loader and a 60" belly mower...

Any suggestions on a good 3pt to 2" receiver adapter that's compatible with the Land Pride QH05? I see a bunch on Amazon, but I'm never sure what will actually fit the QH05. --

Worked like a charm!

Any idea what these weigh and / or how much they should typically cost? --

Today while working on my bx2370 I wiggled the 4x4 shaft and was shocked when the shaft pulled right out of the splined hub...is this normal? I looked closer and see that there is a hole that...

Made some progress with it yesterday. In general, should the LPGS "float" (holding 3pt lever down), or should it be held at a fixed height?

Took delivery yesterday, finally! When I put the lever to 4WD, it won't stay and will pop out back into 2WD. I really think it's an adjustment that needs to be made since it will stay in gear...

I've got 3x small properties. House on a 70' wide x 105' deep lot. Then two houses on a 123' wide by 180' deep lot. All 3 back up to an unmaintained ~8 acres of open space. People walk their...

BX2370 B2320 BX2680 B2601 B2650 Loader LA243A LA304 LA344 LA434 LA534A 500mm max height 518 545 659 827 pivot pin, max height 745 772 948 1146 I bought the BX2370...

I've been thinking something this Swisher Trail Mule would be handy for hauling a tool-box, etc, behind my BX2370. Would probably attach it to the 3pt hitch.

I have a few stumps and Lilac bushes to remove. Was think I might try a spade attachment on the bucket. Any suggestions?

I have the BXpanded Quick on Pallet / Brush Forks, and I like them a lot. That said -- I think I'm losing quite a bit of my already limited capacity having them so far out front. Any suggestions...

Bought it with the LA243A FEL and Land Pride PD10 post-hole digger. I've since added the BXPANDED Piranha tooth bar, ROPS mounted tool box, quick-on pallet forks, and quick-on bucket hooks. The...

2016 Kubota BX2370-1. Coming up on about 13hrs. Got a flat (rear) tire. I'm planning on having the dealer install Rimguard and adding weights to the rear wheels sooner than later. Also...

Looking at having Rimguard installed -- 83lbs per rear wheel. About $1/lb. Wheel weights, 51lbs per rear wheel. About $.85/lb. Strongly toying with the idea of adding the Land Pride BB1248 box...

We recently had a massive wind storm. Gusts over 100mph. I've got houses on 3 lots. 11340, 10800, 7382 square feet -- so about 2/3 of an acre total. The storm took out about 600 feet of...

Hi to all: I have two Kubotas, a BX2230 and BX2370 and they are in two separate locations about 100 miles from each other. I have a problem with the starter of the BX2230 and my question is: can...

Hey everyone, has anyone purchased any of these two tractors within the last few months in Ontario or the rest of Canada? Specifically I am looking for a 60" MMM, Front end loader and front mount...

Hello all, I am taking delivery of a BX2370 very soon. It is going to be a multi-purpose machine. I have about 2 acres of mostly flat prairie land in eastern Colorado. I am getting the FEL and...

I am looking to purchase or would prefer to exchange the ROPS from my BX2370 with either an older shorter non-folding ROPS or the newer narrow folding ROPS from the BXxx70 series. Can anyone...

I had my new BX2370 delivered Thursday, and have been unable to use it until today (Saturday) due to work. Unfortunately, the owners manual did not come with it, and the place I purchased the...

Looking for some advice here. I have a Kubota BX2370 tractor and am shopping around for a tiller attachment. My owners manual says the max tiller size it can handle is 42"/375 lbs. max. Has anyone...

I sat out last fall to find a new tractor to replace our aging Yanmar F16D. I had a pretty good idea of what I was after, so I narrowed my choices to my three closest dealers - John Deere, Kubota...

Just wondering if any one has added a backhoe to a BX2370. If so how do you like it?

Was helping a neighbor move some large oak rounds and one rolled back onto the hood. It was a big wake up call as I didn't get hurt and it scared some sense into me. The log dented the hood pretty...

I have owned my BX2360 for about 4 years and I went by the dealership last week and looked at the BX2370's. I really like the way BX2370 seat is and the way the steering wheel seems to have been...

Hi all, I'm back (long story short I bought a Branson 2400H last year and sold it due to us deciding we weren't going to build our house last year. Now we have built our house so I'm back in the...

Hi all, I had a request from Code54 so I thought I would post this here for all to see and hopefully find. My dealer installed all of this for me at time of purchase on my BX2370-1. I have the...

I'm looking for service and maintanance tips

I have a kubota BX2370 with R4 tires and I was wondering how much each tire would weigh if it was filled with liquid ballast? Will they help with the lifting capacity of the FEL?

Hey guys, I bought my Bx2370-1 last year and I just did the 50 hour service. I JUST LOVE THIS MACHINE. Well I always planned on adding a loader but it looks like my financials are going the...

Hi, I currently have a craftsman 1986 20 HP OAN engine, with dozer blade, dual 50 LB wheel weights, tire chains, and ~75 LB weight on back, besides my 200 LB arse. It has served me well thru the...

It seems there is confusion about the differences between Kubota's BX 70 series prodcts and the 70-1 series. I was in a dealership last week and their answer was it was just showing last year's...

Hi Everyone Just wanted to start by saying how useful this sight was in deciding which scut to buy . So a brief report on on my new mount and what I think of it . So far it...

i know i know, snug it up. I learned the hard way one time that its best to use a torque wrench on oil/differential bolts. Its time for my 50 hr service and would like to know if anyone knows...

We have had a ton of snow this year and ice to boot so im thinking it might be time to add a front loader to my bx in addition to my rear blade that gets most of the snow duty. I wanted the...

Greetings All- Very informative and courteous bunch of forums. This is my first post. I've been lurking and reading quite awhile now. I live with my family in North San Juan, CA, close to...

I tried to search, but could not find anything. Last night while moving snow I experienced a issue with my BX2370 (approximately 110 hours), which I have not experienced before. Intermittently I...

I tried to search, but could not find anything. Last night while moving snow I experienced a issue with my BX2370 (approximately 110 hours), which I have not experienced before. Intermittently I...

How much are bolt on wheel weights for a kubota BX2370 near St. Albans Vermont? I went on the Kubota website and they say that they are around $60.

Getting a new BX2370-1 delivered Friday. Looking at the Rip and Dig but all of the reviews I have read were for larger machines.... Anyone have first hand experience with one on a BX2370 or...

I have a conundrum. My friend says get a auto bezel from a junk yard and use that. I think I want something more sealed. Under the seat would make a good light for the floor of the operator area...

A friend is looking at these two models,both with MMM and front snow blower and FEL.He told me he was quoted $2,000 more for the Kubota.I am a Kubota guy I quess having owned three of them but...

I got to the 10 hour mark and set out to grease all of the fittings. I have the FEL. But I kept finding a few here or there and it made me wonder. Is there a diagram of the location for ALL of the...

Yesterday me and my father went to our local dealer and we measured our model tractor with an FEL and 3 point hitch. With the FEL bucket flat on the ground and the 3 point hitch lowered all the...

I have a kubota bx 2370 and I have a mid mount mower with it and I'm gonna be getting the LA243 FEL for it. I have a 250lb rear blade for it. I am wondering about how much or if I am gonna need...

Maybe I never noticed it before, maybe I lowered my MMM in the past but I realized yesterday(and replicated it last night) that my MMM lowers or leaks down overnight. I think its normal from my...

I was checking fluids on my new kubota bx that i got this year. When i got her the overflow for the radiator was at the very bottom line of acceptable so i didn't pay it much attention but when i...

I've been looking at the 1025R and the BX2370 I could live with either. I've gotten quotes on both with a 60" deck and loader, I added the quick connect to the BX FEL. The out the door price for...

A while back I sold my JD 5210 because I was barely using it. My thoughts were to invest in a good zero turn for mowing. After shopping around and driving several of them I had some doubts about...

I got the 60"MMM, bagger, and the FEL....Im looking forward to tomorrow. I can finally get the place in real shape.

I have a 6 acre place in Southeast Ohio. It's a very hilly place. I am considering buying a 2014 BX2370 with a 60" belly mower and a 48" brush cutter. I have a couple of questions. How do...

Our new BX2370-1 was delivered Thursday and we have about 6 hrs on it between my wife and I since Friday Eve. We have both found the ride to be extremely rough - jarring. The rear turf tires...

I feel like John Thomas. :laughing: I've had my L3800 for 2.5 years now and have done most of the major stuff that I've wanted to do. It only has 160 hrs on it. I put 50 hrs on it in the first...

Thinking once again about consolidating and upgrading. I have received two quotes for a BX2370-1 with: -loader w/bucket & quick tach pallet fork -60" mid-mount mower -60" hydraulic front blade...

I have a new bx2370 with 23hrs on it and noticed i have bubbles visible in my HST fluid when i pull the dipstick after working with the tractor. They pop/dissipate or whatever you wanna call it...

Is there some easy way to turn the cutting height adjustment on the BX23??? It seems very balky and sometimes impossible to turn. I know that the lift must be in the highest position to adjust...

Just mowed this afternoon for the first time on my new BX2370!!! When very smoothly compared to what I had been using. I was impressed by the short turning radius too. Like driving a new Lexus!!

FINALLY!! After waiting more than a month to get a new Bx2370-1 in stock with the new floor mat and narrow full folding ROPS it finally was delivered today. Played around in the yard a little...

Just bought a BX2370. The idle is at 1500rpm. The book says normal is 1350-1550. Had anyone lowered their idle or can give me a way to lower it. Thanks in advance.

... in particular the "specially reinforced fame" ... what exactly is beefed up? What are the differences in the loaders? .... I might have missed something but the specs looked the same. I sat on...

Well gang im awaiting the delivery of my new BX2370 this week or next. I was laying here making a list of things I needed (skid plate, bumper, future attachments etc) and I started to wonder if...

Sold My Old Wheel Horse. Looking At Bx2370 Or Jd1025r.Leaning Toward Kubota. $2000 Difference InFavor OF Kubota. Dont Like The PlastiC OfJd. Any Thoughts

I realize it depends on what you're doing at what RPM I suppose, but I just hit about 3.2 hours tonight and the fuel gauge still shows full. On average, how many hours can I expect per tankful...

Anybody know the difference - both 2013 models ?

Looking to buy a scut. Tossing around the idea of a BX1870 with 54 deck or BX2370 with 60 deck. Not really plan on getting the FEL. Main use would be for mowing, pulling a trailer (firewood etc)...

I am a new owner of BX2370 with front loader, box blade and 60" mower (3blades). I struggled with the mower removal because the shaft was so hard to work with and I couldn't pull it out. Any...

How much?

I purchased a BX2370 by phone; traded in a GR2100. I thought it would include the hydronic valves for a future Frontenac Loader - it didn't. So about how much will it costs to add the valves and...

There's about $5500 difference in similarly spec'd machines. Am I gaining anything else beyond the backhoe?

Hi folks, my first post. Here's a few pics of my DIY fold-able front grill protector. About $30 total cost and 2 evenings in the man cave. Cheers from NB Canada

Hey Guys, We just purchased a 1 acre waterfront lot in PEI to build our retirement home. The lot has a very gentle slope which runs down to the water - it's not even noticeable. The average...

Sorry - posted in the wrong area.

after researching and looking...I decided to go with the BX2370 & 60" mower(not fine cut)...no loader or anything(I have a Bobcat)...will only be used to mow 3 - 4 acres... my other tractor/mower...

i am not much of a typeist or speller.

For years I have had a 1991 Kubota B20TLB and a 2000 Great Dane zero turn mower. My zero turn needs an engine rebuild, so I have decided to sell both the mower and B-20 and buy a machine that can...

I have been looking for a 48" bush hog for my BX2370. The salesman told me it would handle a 48" with no problem. Looking at the manual it states the max width of a rear mount mower as 60", but a...

Hello. New to this and trying to get the hang of it, so here goes. I am looking at buying a subcompact tractor and have narrowed it down to the kioti cs2410 and the Kubota bx2370 (i think). I am...