GManBart
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 4,976
- Location
- Detroit, Michigan
- Tractor
- Massey Ferguson 241, Kubota SVL90-2
Well gas watch or whatever the internet says isn't my eyes, unleaded is 2.04, diesel is 2.39 at 5 stations within 8 miles of my house ��, and for work, we don't deal with 1/2 tons much, but 3/4 tons we build are 98 percent gas to 2 percent diesel. And the price difference in 3/4 tons and up is about $8300.00, which doesn't really apply to this thread about F150 diesels, but I'm pretty sure successful business owners would know which motor is going to give them the best return in investment. As far as the better return in 1/2 tons, if a person is towing 10,000 lbs more than twice a month over 200 miles each trip, they should have a 3/4 ton just for safety alone. Edmunds mag will post anything if they're paid well enough, just like anybody else. Not to deter you're reasoning, because there is a place for diesels in the world and I for 1 miss the fuel economy and reliability from them, but my last demo was a Ram 3500 C&C, crew cab 4wd diesel with max payload, 4:10 gears. Mostly highway driving, best mpg was 14.8. We put my 18 foot bumper pull with 2 sxs on and went to the farm one weekend, avg 10.8 mpg. My personal 3/4 ton with gas motor, 4:30 gears, pulling my PJ 24 foot gooseneck and MF 1533 gets 9.4 on same trip. Yes the 1 ton got better mileage, but a lot lesser load. I'm not disagreeing with the fact that there's a need for diesels, I'm just voicing that a 1/2 ton with a diesel will be hard to recoup the upfront money and really isn't a practical option for the average guy.
It seems hard to imagine that Gas Watch would get the price of regular unleaded correct in your area and then erroneously report diesel prices at the same time. Sure, it might not be every station, but there were ten listed in your general area that were at, or significantly below, the price of unleaded. I see the same thing around here...lots of stations charging $2.30-2.40 for diesel, but the places with good prices are much closer to $2.00...you just have to know which ones (they don't normally change). If someone is looking to save on long-term fuel costs by buying a diesel I think it's reasonable they'll make the effort to buy diesel at the places with low prices rather than the convenient stations.
The companies you're building utility body trucks for....what is their lifespan before they get replaced? A lot of work trucks like that don't actually do much driving, so the diesel won't pay for itself. They drive somewhere and sit all day while the employees work on the job site....no need for a diesel. In others, they get beat up quickly and don't last long enough to make a diesel worth while. None of that is really the situation we're talking about.
Saying that a 1/2 ton diesel will be hard to recoup the upfront money ignores the math of fuel economy, and saying it isn't a practical option for the average guy is really just a guess. Take the same truck....a Ram 1500 and the diesel gets 25% better fuel economy than the most fuel efficient gasser they offer. The diesel costs about $3K more last I knew. It simply won't take that long to save $3K with 25% better fuel economy and that's in normal non-towing driving. If they tow, it will shorten the time it takes to pay for itself.
All of that is coming from someone with two 1/2 ton gassers. My work truck is a gasser and I would have no need for it to be a diesel. My personal truck could go either way because I do tow with it pretty frequently. On a recent 500mi round trip with a 6K load I sure wished it had a diesel...had to stop to refuel in both directions (could have just squeaked by but I don't like running a nearly empty tank) and I get tired of the engine downshifting on the slightest little incline.