Buy syncrowave 200?

   / Buy syncrowave 200?
  • Thread Starter
#22  
I’ve never hit the duty cycle limit. It has popped my 60 amp breaker a couple of times with the amperage set to 200a a/c.


Thats funny. The manual states it needs 54 Amps. Are you also using a 60 amp brake on a 50 amp plug??? Never found a plug with more than 50 amp
 
   / Buy syncrowave 200? #23  
Thats funny. The manual states it needs 54 Amps. Are you also using a 60 amp brake on a 50 amp plug??? Never found a plug with more than 50 amp

I use the standard 50 amp plug on a 75 and a 100 amp breaker. They are pretty hard to overheat since welders are intermittent draw.
 
   / Buy syncrowave 200?
  • Thread Starter
#24  
So I just got him down to 1250 CAD & some filler rod and had just asked where he lived when he said he just sold it to someone else. I guess I'll have to keep looking:( .
Thanks for all the replies though, I really appreciate it.
 
   / Buy syncrowave 200? #25  
   / Buy syncrowave 200? #26  
Yes. I do it all the time. I’ve even mig’d brackets onto tubing then used the pulser to give it the tig “stack of dimes look”.
Makes me want a TIG pulse after seeing that! Also makes me now question beautiful welds? Does this technique work for all metals? SS, mild, and aluminum?
 
   / Buy syncrowave 200? #27  
Yes, with varying degrees of success. Aluminum is harder to fix IMO.
 

Tractor & Equipment Auctions

Ingersoll Rand Air Compressor (A52377)
Ingersoll Rand Air...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A55973)
2003 Big Tex 10PI...
TUGGER TRAILER (A55745)
TUGGER TRAILER...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
New/Unused CFG Industrial H15R Mini Excavator (A54865)
New/Unused CFG...
 
Top