Search results

Congratulations SC. It'll be a fun ride for a lot of years to come. My G-kids are 16 (g-daughter) and 17 (g-son) YOA now. Grandson is trying to get into West Point and the Corps of Engineers.

Would an RV waste tank heater work. Some can be used at 120 volt or 12 volt. They have sensors that turn on/off at correct temps. I have them on my RV and run them on the batteries.

Use a copper backing plate (because mig weld will not stick to it) and .025 solid wire with 75-25% gas. Short 3/4" - 1" welds spaced 3/4 - 1" apart and then fill in between, should not burn through. I've been doing this on my '65 Chevy Malibu body panels, it's been working well for me.

Here's another place I found

This stuff if you can find it, is amazing. As said earlier a couple squirts in morning and again at night. A couple days and it's free. Not as cheap as WD-40 but works tons better.

My dutch oven is 14 quart. The turkey was 11 pounds and veggies and potatoes were in there also. I have not tried but bread in it, yet.

I worked for a hospital in the area that hurricane Charlie visited in 2004. Other hospitals in the chain donated many items for employees and local families. My DIL used the last of the mesquite I was asked to relieve the hospital of, on Thanksgiving, to cook the turkey over in a dutch oven.

$1800 is not bad if in good shape. I just built a 16' x 16' very simple shed. It cost me $2500. No windows or inside wall coverings.

Happy Thanksgiving to all. DIL cooked a turkey in the Dutch oven over and under charcoal with potatoes and carrots, onion and apples stuffed inside. Corn casserole, cranberry sauce, rolls and green beans. yum yum

There is a requirement in residential work in my area. it's NEC 220-3(c)(7) it's also the reason for only 13 outlets on a circuit in commercial work. It states that each receptacle will be concidered 180 volt-amps.

That does look interesting. But $5000 is a bit steep. I'm cheap, so a trailer would have more options for use.

I have a 24' x 30' garage. I used a propane buddy heater in my garage before I installed a heat pump mini split.

The picture didn't come in the first time I posted. It looks like the inner pad is worn out but outer pad is not. Get a new set and remount the caliper assembly and see if it re-centers. Maybe clean and lubricate the assembly mount.

X3 On the rubber hose. Mine went bad on a '03 silverado and caused drag enough to overheat disc wore pad.

Isn't the red tow dolly/pick up bed being towed backwards?

Water is freezing in the supply line in the back of the unit? Filter is needing replaced?

I have a battery on my dump trailer that has been there for about 10 years. I installed an Anderson plug on truck and trailer with 8 awg wire. I plug the trailer in when I hitch up. I use the trailer sometimes once a month and sometimes 10 times, sometimes not for 3 months. As long as I plug-in...

My florida house is 2x6" exterior walls with 1/2" plywood, tar paper, wire lath and stucco. The only problem area I have had was the wall behind the water softener and airation tank. The house is 29 years old. I did not repaint that area ever. So moisture got into the stucco and rusted the nails...

Really bad picture. A TONKA dump truck strapped to very end of flatbed semi.

Picture did not upload. Try again

Saw this yesterday on I75N near Macon, Ga.

Traffic cameras?? Electronic traffic warning billboards???

this is a local radio show song about the roundabout

I took my driver license test in a (my oldest brothers) '71 challenger 4spd in '72. Only car available that day.

Yogi05 why not take it to a welding shop for repair?

A friend of mine had a chevy pickup bed in his yard for years. I asked him why and what he was going to do with it. He said "you want it, take it'. So I did. Another friend has a body shop, I asked him if he could use it. He said bring it over we sell them up north for all the PU bed that rust...

Depending on the size of the hose, I use a pair of needle nose pliers inserted into the hose and spread the handles to streatch the hose and then quickly slid on the fitting.

The manufacturer should have them packaged for shipping. And could offer details on how to move them. The A-frame support is how I see glass and marble slabs transported around here.

Never had a Nova. But had one of these (1965) in high school. So I had to get this one around 1997. Still have it. In 2007 found a '64 convertible SS it's still a project. It has supposedly an original 265 cu. in. V8. and 4 on the floor.

I have heard that Irish Spring bar soap is a deterrent also. My '92 Jeep Comanche engine compartment was completely full of pine needles, grass clippings and other stuff to the point I could not see the motor after not looking at it for a month. a couple wires and one fuel injector had been...

Growing up 1 had 5 brothers and 3 sisters. We lived in a 1200 - 1400 sq. ft. home with 4 bedroom and 1 working bathroom. My 2 older brothers shared a room. My 3 older sisters shared another room. Mom and Dad had the third room. And me and my three younger brothers shared the fourth room, that...

OP are you by chance a lefty. Wired houses for 18 years and one left-handed helper that Twisted the wires backwards the wiring nuts would not stay on for him either.

When i was looking to buy my <7 acres, one of the neighbors (Robert) knew the property well. It was his sisters and it was given to her by their father. Robert walked the property line with us, through the forest and up and down the elevations. He followed the fence lines and some white PVC pipe...

My dad and uncle were pilots. They were taught in the seabee I beleive in the '40"s. Uncle John's plane was an old, old, old, tail dragger with no radio. Flying from Long Island to Vermont one weekend (long ago) supposedly circle airfield twice landing the third time around a duster came up...

Lift a few pavers. Is the grass growing through the weed fabric? Or between fabric and pavers. The ashes are like fertilizer. How do you mow the surrounding grass?

I've meet two actors John Hillerman, Higgins on Magnum P.I. Jeffery Jones of Ferris Bueller's day off.

I like the cutler hammer brand. Installed a few hundred in homes.

I'm wondering what name brand is that 15 amp breaker is. Hopefully not FPE.

Would something like this work?

Hot in a two wire switch loop

I usually use a hacksaw blade and make 3 or 4 cuts about 1/4" apart inside the metal pipe. Then use an awl to pry then out. Needle nose plyers to get the rest out.

Not that I found just harder to break

I wired and trimmed our houses for 18+ years. Then I worked in a hospital for 19 more. The first couple years when I replced an outlet I had to put it in twice. In homes we put ground down. In the hospital it went up. Most had metal plates.

Second wire that's hot is GFCI protected for outlet on light pole?

Could buy one of these and use the correct size to put in joint for the time being.

I had radical robotic prostatectomy in 2013 at Celebration Florida Advent Health. About 2hour ride from home. Dr Patel is the director of the Global Robotics Institute at AdventHealth Celebration. He leads one of the world’s most experienced robotic surgery teams and travels around the world to...

0k next thing I found: After clicking the "bell" and after clicking the word "settings" on left side of screen below the hi-lighted word "setting" is "Account Detail" click on that and click "receive news".

When you sign on click on the bell next to your log in name. Go to bottom of the flyout and click setting. Click on the options you want.

mirror plexy is easier to work with

Manual says 22.5 inch in length and 14 inch diameter. The load that I processed was 16 inch length and up to 20 inch diameter

Sorry working on a very slow connection right now.

I bought a 22 ton powerhorse from Northern Tool Tuesday. Assembled it and added fluids. It rained all day Wednesday (yesterday). Today I set it next to the wood pile and drying rack. Took a couple hours. I ran it at about half speed. A little slow but this is the first time I have used one. I am...

I have two. A '65 Chevelle 2 door hardtop 283, powerglide. Driveable And a '64 Chevelle AS, 2door, convertible, 269, 4speed. In boxes and buckets. At least 8 years in restoration.

Pour a little (1/2 ounce) of muratic acid in a plastic coke bottle. Put in a strip of aluminum foil, quickly cap the bottle and throw it far away. BOOM.

Have you tried a toilet snake? Maybe something got partially flushed and creating a siphon. I worked in a hospital maintenance department for 19 years found a lot of weird things happen.

My alarm is only for if the house is entered. I wired a transformer and a buzzer from the motion lights outside the house to sound inside the house. Like mentioned thieves don't care if lights go on at night. But the sound of my semi autos being racked as I walk out the door gets them running...

4pin bayonet connector.

just made myself one.

Only have access to this pic on my phone.(I took a pic of the computer screen after i found it on the game camera back in August) Others are on my laptop. I got this guy a couple times.

My son was asked to help an elderly couple to cleanup their yard. To cut back or remove a few very overgrown bushes and trees.he picked out a JD D110 and this attachment. He was wondering if anyone could tell him he possible manufacturer, year. I am hoping I can use it on my Kubota B7100. It...

Use a bowline knot

I tried something a little different today with my log Arch. Needing to move logs that are longer than I usually cut to. I added my tongs at the front while winching the back. And the log further forward. It worked pretty well So I tried to use the arch for moving other parts of the tree. Not...

My first for the year yesterday. Sorry for the blurry picture.

I don't have a Mahindra. But I went to the feed/ hardware/Mahindra dealer had these .....

Let me try this to see if this is going to work.

I built this one out of 2 x 2 x 1/4 inch. cost was less than $100. Pawn shop come along (4ton), flee-bay pulley, Old trailer axle and wheels found on side of road.

I think a weir gate is the answer

Do you have a home remedy to releive the itch of them. I have somehow gotten into a nest of them. All over my ankles. Almost can't wear my boots. Dipping them in cold water, calamine lotion, alcohol not much seems to work. Thanks for anything that helps.

This what is making those holes I recently stayed in a house in North Carolina and caught this 'diging' into the wood beam.

I am currently building a garage. I did this to be able to clean the floor.

Magnesium is good for cramps of all type. I do not retain any magnesium. i take up to 4 400 mg tablet a day and it is not found in any blood tests. But I dont have leg cramps any more.

ronjhall, My wife was having terrible leg cramps for a long while. She read somewhere that apple cider vinegar would solve them. She tried it for a couple days and they went away. Some time later (months) I had leg cramps. She said remember when.... try it. I said it was an "old wives tail"...

This is how I am doing it.

This property is where I use the tractor.and this is what will be connected tomorrow. it is on the shed that i keep the tractor in

Here's one from our chickens.

I had these logs milled by a guy who came to me He took two days. First day was with setting up mill on my property and some cutting. End of second day all wood was cut. Mostly 1 inch thick by 6 -12 inch wide. $280 did it all.

a couple pics of the place.

I made this. largest log estimate was 1800 lbs

That downed tree was just an example. It and another were cut into lengths. I had a portable BSM cut it up. That pic was not of florida but of north georgia

This is not typical but one that I had on my property that needed to be removed. most will be smaller.

About a month ago I bought a new to me truck to replace my '03 that had (+)200,000 mile on her. A 2013 Silverado

It not that complicated is it?

Here it is set up with the other items we put together. The theme was Super Heros can you tell?

Not quit as cool as the FC I bought this a MJ a few months ago.

I had made this a couple of years ago. but did not have pics of the build or finished product. I was using it on my Georgia property and only used it to move a small trailer and small campfire wood pieces. But I knew I needing to pull some trees when I returned, I got a brush grubber(I love...

just under 7 acres that still looks like this (I did remove the downed trees)

I built similar a couple of years ago. I built floor in two sections. then I built wall sections and trusses all in Florida and transported to N. Georgia and assembled on a weekend with 3 helpers.

I have a property in northern Georgia that I need to have the local utility company get power to .Right now I only visit it with a camper for a week at a time. I met with the local guy and he says it is my job to get permission to run across my neighbors property. Has any one here had to do this...

Last week I visited my property north of Atlanta. I have a shed therewith shovel and hand tools and a very used 1978 Kubota 7100 in the shed. It was very late on Friday when I arrived. The next morning I tried to start my tractor and it acted as if the battery was dead. I pulled my truck to the...

I had this on the attachments forum and did not get any measurements could someone help me out? I am building a new attachment for my kubota B7100. what I need is the measurements for the loader arms and hydroulic rams at the loader bucket. I would measure mine but I am in florida and the...

I am building a new attachment for my kubota B7100. what I need is the measurements for the loader arms and hydroulic rams at the loader bucket. I would measure mine but I am in florida and the tractor is in Georgia (650 miles) anyone have the ability to measure theirs for me??? THANKS in...