Search results

Posted for years on TBN but first time in the rototiller forum. Just picked up an old Troy Bilt and have became frustrated in trying to identify hp and other things. I have found numerous sights with information but none seems to get me information I want. As you can see from pictures this...

might be a good deal for someone. front end loader - farm & garden - by owner - sale

Curious as to whether any of you have adjusted your valves and if so how did you find the adjustments. The repair manual schedule shows this task at 800 hours. My CT235 has 1714 hours and I have owned it since 12?? hours having no idea what was done to it in prior history. Sort of thinking I may...

I know loaders are in demand sometimes and we don't see many of these for sale around here so I thought I would just put it out there. Front end loader for small tractor

What do you guys know about the transmission Yanmar has in some of their new models. I see on one Ebay listing the seller is advertising the reverser as "powershift". 217 YANMAR YT359 TRACTOR 4X4 W/ LOADER DUAL REMOTES CRUISE CONTROL...LOADED!!! | eBay Reading on the subject some indicates...

Merry Christmas and Happy New Year to all you Bobcatters. :xmastree::xmastree::xmastree::xmastree:

No hydraulic specialist and I know this is not the way this is all designed to be used but here is my sketch of what I think you are trying to do.

Here was that loop on my old 2002D. I removed it, installed a headless plug and then plugs where the hose fittings were. That is made for auxilliary hydraulics same as the diverter blocks you see on some models. Wooops, messed up from an old mind. The headless plug must be "removed" if you take...

This is going to throw a monkey wrench into your plans so you will probably just want to ignore it. Having the quick disconnects before the loader valve can be bad. If the line from the pump to loader valve gets pulled out for whatever reason your pump will dead head. The correct way is to put...

This is where the stop cable connects. Just how it is hooked up inside I don't know. Pretty sure it just closes the rack when pulled.

Saw this on our local Craigs list. Seems cheap enough but maybe to many miles between where needed? John Deere 666 Snowblower

I believe this is worth sharing with Yanmar owners. LOADER-PROOF AXLE!!! NEW PRODUCT!! - Yanmar Tractor Support Message Board

My effort for a bucket level indicator. When the bucket is level on the ground see photo one. when bucket is in dig position see photo two. A piece of 3/8" rebar, small section of 1/2" pipe. Upper mount a small piece of 3/16" flat metal, lower mount a small piece of 1/4" flat metal.

Another new product from Hoye. I don't think it is illegal for me to attach. Not advertising, I just feel like it could be interesting to some. Yanmar Tractor Support Message Board ? View topic - Rear Axle Wheel Spacers!! New Product

https://www.youtube.com/watch?feature=player_embedded&v=ZvHvFOS2YPg

Based on these images it would appear they might interchange although a different look.

Seems a buyers price in case any of you guys are needing this size tire. Ad probably won't last long. 2 Tractor Tires 9.5x24 like new . wont work on my 4x4 tractor. used 2

Check this out, all you guys wanting bright headlights. Yanmar Tractor Support Message Board ? View topic - New LED Headlight Assembly For YM2000, 240, 1700, And More!

Can't help but advertise a little for Hoye. They are always looking to help the Yanmar owners. This will. Yanmar Tractor Parts Hydraulic Return - Dipstick Adapter

My hood decals are starting to peel. Anyone bought these without breaking the bank? Any idea the cost? 7148972 and 7148973. As seen in this picture. 2012 Bobcat CT235 MFWD tractor | no-reserve auction on Wednesday, January 29, 2014 |

Thought this might be of interest to some of you. Yanmar Tractor Support Message Board ? View topic - New Power Steering Kit And Other Fun Things On The Way!!!

After used purchase I found someone had not just stripped the drain plugs on my oil pan but had broken the cast aluminum all around the plugs. I JB welded them but have been nervous ever since so I broke down and ordered a new pan, gasket and drive shaft o-rings. I actually ended up ordering my...

Haven't recieved them yet but ordered these yesterday. Amazing price differences on internet. Amazon.com: New Pack of H4 12v 35w/35w Halogen Front Headlight Bulb Motorcycle ATV Scooter: Automotive

Pictures of my Harbor Freight work light and box for pins, etc. and also a little larger tool box. The light is acturally a fog light and comes two to a package and complete with switch. The Bobcat already has a swich activated wire in place for the work light. Pictures taken in shed so light...

Will ramble some here, not required reading though. This afternoon I parked my tractor after mowing some. Went back to crank up a little later and nothing. Lights all worked bright, horn blew. Broke out the meter and got 12.75volts at the big starter terminal, nothing at the small solenoid...

I have read numerous posts on troubles with the hydrostat pedal not returning properly. Seems to be different opinions or different cases of just what cures the problem. I know the original pedal return cylinder was part #6695874 and replaced with part #7022773. Seems the newer one maybe has...

:weepy: I recently bought a Bobcat CT235 to uppgrade in size. I have sadly sold my little YM2002D. I suppose I will move all my comments to other forums which might make many happy. I'll probably still be watching in the background. Thanks to all of you for your help through the years.

New to this forum. Just purchased a ct235 knowing nothing about Bobcat tractors. Got home and find they no longer make the tractors. Am I going to have a hard time finding parts for my new machine? Thanks :o

New to the New Holland forum but have been following Yanmar forum for several years. I am considering buying a used TC29. My main concern is availability of parts. Not talking filters but engine parts, drive train parts, etc. Are most parts available for the TC29? :confused3: Any reviews on...

Just installed this gauge on a 1050 John Deere. Equus 6262 - Water Temperature Gauge | O'Reilly Auto Parts Although the on line information does not state this, it comes with adapters, one is the m16-1.5 adapter required on all these grey market Yanmars. Several wires to do on it although it...

Just happened to run across this and thought some might find it interesting. I wasn't aware that Yanmar offered this option on the YM240. Straight out of the parts manual.

Thought this Craigs list ad might get some comments. Note the wording. Like New YNM FX 335 4x4 Tractor 40HP w/ FEL Also wording on this page. dallas farm & garden - by dealer "ynm" - craigslist

As the followers of this forum know I am constantly messing with my tractor. This may get long but is not required reading. As stated before my 2002D was a Vietnam refurb and has dealt great misery in the past but been reliable for some time now. However, it has never run quite as cool as others...

I saw something today I have never seen before and I have been around quite a while. Wife and I were eating lunch at 12pm and glanced over at the porch thermometer and it was reading 68 degrees F. Never have seen that on August 1st in all my put togethers. Weather people have not confirmed it...

I am getting desperate! I have requested the valve settings on two different International forums but have got no feedback. Hoping one of you Yanmar owners might also own a manual or have knowledge of the valve settings on an old 424 gas engine International. I have googled and found one sight...

New to the International forum. I have a 424 in my garage wanting to get it running for a widow lady to sell. Anybody out there that could help me with the valve clearance I would sure appreciate it. I have googled and come up with a possible .014" on intake and exhaust while hot. Anybody agree...

Gentleman has this listed on our local Craigslist. yanmar tractor Price was to low for me not to go look at. Found out it was a YM177 and look at this. Yanmar Tractor models to avoid Long story and probably no one interested but just in case someone out there has a YM177 and needs parts this...

I know tractors are multipurpose but never have seen one used this way. :D BBQ Rotisserie lamb grill in Lithuania vs YANMAR YM2020D - YouTube

Anybody needing parts for their 2000? DO YOU NEED YANMAR PARTS?

Thought I might post this in case someone looking for a tiller. If in decent shape I would think a good buy. I'll guess it will sell by days end. Yanmar Tiller

Might be a deal for you California gentlemen. Small Yanmar Diesel Tractor Model 2TR20A x 24 Horsepower Needs Some Work | eBay

I think I know the answer. Notice all the tractors sitting around. I'd bet a dollar to a donut this is the old VN remnants. Notice the word Yanmar is not used in the ad. 19hp tractor three point and pto

I went out and measured my fabricated top link from pin center to pin center. Although adjustable it is set at 15-1/4". My tiller never hits the wheels, my chain case runs in a vertical position. About a week ago I had a 1200 chain driven unit repairing and selling for a widow lady. I hooked...

Hope this is ok here. I have done a little work on a rotary mower to sell for a widow friend of mine. It is now in good working condition. Tail wheel reworked, deck straightened and welded, blades sharpened. There is no sign of a tag on it any where. It is a 5 footer with a stump jumper...

Looks like this has the makings of a good buy. If I was in the market I would be calling. 26 hp cub cadet 4x4 tractor w/loader

How about this bright yellow 1610 with only 77 hours on it. Yanmar 1610 Diesel Compact Utility Farm Tractor FL1535 Loader Bucket | eBay

Welcome to the Yanmar forum Texas John. :welcome: I live in the Gilmer area. Your 2500 is very similar to the John Deere 850.

Not seen Fredricks use ebay before. This should be interesting to watch. Yanmar 2210 2WD | eBay

Was just impressed with this gentlemans 1700 and thought it might be worth a look to others. 1700 Yanmar Tractor Also some nice pictures showing how the 1700 is put together.

Did the YM 1700 ever come in green or is this a repaint? Yanmar 1700 tractor & 4ft. Brush Hog Tempting to look into this one. :D

The side view picture of the loader valve seems to show a tag. Could that be cleaned and made legible?

I saw this on another forum and believe it would be good to pass it on. Hope the real owner is looking. ATTENTION STOLEN TRACTOR RECOVERED

Here is the 4m-.7 setscrew that holds the fuel valve handle. Has a special rounded end. Picture for what it is worth.

The radiator is supported by two bolts and rubber grommets at the bottom and two rods up high on each side. Hydraulics on that thing should reach and get it, I know this one does. Do you have a loader? Does yours have power steering? Here are a couple of pictures of the one I am in the...

I just had the 3rd voltage regulator go out on my tractor yesterday. One before that was about a year ago. One before that was 3 years ago. I'm tired of this expense. It uses the vr522. My research has told be there is no other replacement available. Therefore I am entertaining the idea of...

I would next switch the voltmeter to ac volts and check the wires coming off the dynamo. Running the 1800 or so rpm you should get 20 or so ac volts. If not the dynamo is bad which I doubt. If that checks ok switch the volt meter to dc and stick your red probe down to the red and yellow wires...

Your plugs are in the control valve section. Picture is of my ym2002d, I believe it is just like your 220d. The looped hose will be where your in and out go. My loader was installed by cutting the high pressure tubing going back to the 3 point. I believe the way your are wanting to do it will be...

Here is an update on my garden. 1st picture is onions, turnip greens, way in the back some spinach. Onions finally taking off. We have been eating turnip greens and plenty more available. 2nd picture is 4 rows of English peas. They are pretty much in full bloom although I don't think the...

Here it is. Split piece of 4" pvc pipe. Raised beds could definitely have value in irrigating like cardoc does. Also value against flooding if you have that problem. My thinking is they have value with root crops because they make for a deeper bed of loose dirt. Just my thinking. I have...

I came across this item a few years back in need of repairs. It was originally made to attach to a 3 point. I have since added 2 more forks, and adapted it to work on my loader or 3 point. It works pretty good. :D

Recieved my fittings today and am now plumbed for power beyond. Thank you all for the good advice. Anything looks wrong here please let me know. 1st picture: power beyond plug installed in top opening. 2nd picture: Tank return. That is a 3/8" opening directly below my dipstick. That is...

Thought this was interesting. Yanmar vs. Kubota - YouTube

I wonder if I could get this to fit it my Yanmar? :D Worlds Biggest Engine@www.vincelewis.net

I pretty much hi jacked deepNdirt's thread on "Something you realized you can do with your tractor". I apologize for that. Some may find my gardening tactics interesting and some may not. It will not be required reading. It is Yanmar related. I normally plant turnip greens, spinach, etc in...

One of the bearings on my little dynamo locked up today. It uses two 6201 2RS double seal bearings. Had to cut the inner one with a dremel tool. I didn't have a puller small enough to get under it. After cleanup everything went back together smoothly. Both bearings were $7.74 including tax...

Hmmmmmmmmmmmmmmmmmmm! Just yesterday I had my 3 point concrete mixer on. It is somewhat modified to make it work on my ym2002d. When I operate it I close the stop valve to lock the lift in the top position. I have an auxiliary outlet that I then operate with the 3 point control. Because of a...

Happy Thanksgiving to all you Yanmar lovers. America is still the best place in the world to live. Many many things to be thankful for. :thumbsup:

I noticed in browsing the net that RCO Tractor is now an authorized Yanmar dealer. That is on Yanmars sight. RCO's web sight says updates are in progress. No mention of the old Yanmars. That is one way to avoid a law suit. :D http://us.yanmar.com/where-to-buy/

Mr. Domush, just got to ask, how is your 336 doing? It has been awhile since your overhaul thread closed out. Your thread was the winner for the year, maybe several years, talking about Yanmar threads. You had over 5600 views on your thread. Maybe just an update on your being pleased or...

OK, I know y'all (you guys) think I'm touched by now. I admit I do a lot of things that probably don't need done. That is one of the advantages of being retired and a bit retarded. My heat gage on these East Texas 100 degree days has been running up a tad over the midway point on my gage when...

Another project probably not needed but just wanted by me so here tis. My lift slowly leaks down so I decided to order all the o-rings and gaskets to go through it. The way the 2002 lift works it constantly raises it if it drops a minute amount it will pick up a minute amount. Remember all...

Another project probably not needed but just wanted by me so here tis. My lift slowly leaks down so I decided to order all the o-rings and gaskets to go through it. The way the 2002 lift works it constantly raises it if it drops a minute amount it will pick up a minute amount. Remember all...

I noticed clicking on the Yanmar name under RCO's home page brings up "Update in progress". That would sort of indicate they are no longer handling Yanmars. Anybody know? :confused3:

I had my 2002d 8.3-24 tires filled with a weak antifreeze solution. Run over something the other day and punctured the tube. I found it to be quite a job to get the remaining antifreeze out in order to break the tire down and patch the tube. So after finally getting most of it out, tube...

No details but the price is right. Maybe. YANMAR tractor

Got to noticing the spindle had a good deal of slack where the steering arm attach's up top. Tore it down far enough day before yesterday to see for sure what parts needed ordered. Put it back together. Ordered the parts yesterday from Hoyes, received them this morning, started the job after...

Probably not doing something right but here is my dilemma. In using the old search feature it was possible to choose a forum to search in. That doesn't seem available now or am I just doing something wrong or not understanding how to do it? :confused:

Check this out. 2012 Yanmar Sc2400 HST Review

My old tachometer hand sort of moves around and is as much as 200 rpms off depending on speed. This is with checking with cheap digital tach. I have changed the drive cable and little gear unit because of an oil leak. So I believe the tach itself is the problem. I have considered removing it...

I see people looking for these things pretty regular. Not sure it would fit a Yanmar but guessing it would. Might be a good buy if your in the market and close to Texas. Finish mower / PTO drive / 3 point hook up Might ought to change that to "close to East Texas". Long ways across this state.

Looking for opinions. Here is the senerio. If you hooked a ym1500d and a ym2000 back to back with a chain which one would pull the other backwards? Of course both with no extra weight or implements. And yes, 4 wheel drive is engaged on the 1500 and both can or cannot engage the differential lock...

How many of you guys have seen a Yanmar log splitter? Sorry about that, didn't seem to get it attached first try. http://easttexas.craigslist.org/grd/2865905360.html

I found this video very interesting. I have never seen this attachment. Yanmar Mini Tractors - YouTube

This came up on the Craigs list in our area. I don't see many this size. Just thought it interesting. Tractor Yanmar YM7000DT, Turbo,4x4, front loader, cab and air

Looks like this might be a good deal for all you snow pushers. :D Yanmar Tractor Support Message Board • View topic - 155D for sale,Ohio

Occasionally I see mention of full time 4 wheel drive Yanmars. As I understand full time 4 wheel drive there has to be a center differential which might require a transfer case. Wondering if anyone knows the models that have this? Wonder if anyone owns one and maybe has pictures? Just curious! :D

Hope you guys don't get mad at me for posting this but I found it amazing. Pretty long video. May be a 12 cylinder Yanmar. :D The world's tiniest V12 engine. [VIDEO]

Had a question come up on another Yanmar forum about wet brakes. Knowing there are a lot of curious folks out there I thought I might just post a couple of pictures of an 1802 and 2002 wet brake system.

Well looky here. Not advertising, just think this is worth sharing with all you 1500 owners. Would be interested to see your thoughts on this. Yanmar Tractor Parts: WATER PUMP CONVERSION KIT-YM1500

OK, I know this is a Yanmar forum but you Yanmar guys and gals have finish mowers. Going to preface my question with history. At one time I had a Cub tractor with a Woods 42" belly mower. It had a single blade that was flat as a flitter. It did an excellent job of mowing with hardly any dust...

Well 284, I decided to go ahead with my safety chains. I used 2/0 twisted chain only because I had 15' on hand. Had to buy a small piece to complete as you can see from the shiny ones. I used 1/8" x 1-1/2" flat bar. I drilled 1/4" holes on 1" centers which gave me 55 links. The factory one has...

For anyone who might be interested or have one to post. Here are my toolboxes and cup holder. Had someone wanting pictures but not smart enough to attach them to a private message.

At California's suggestion I'll start a new thread on an old subject. A few pictures and explanations of modifications to make my Harbor Freight quick hitch work for me. First is the swivel adapter I fabricated, Harbor Freight sells them, their sight is down so I can't post a picture of theirs...

Well, I'm bored so I thought I would see if you guys have ever seen a 14 hp ym240. And only 65 hours. :D YANMAR YM240 65HR 3PT HICH NICE!!!! - eBay (item 220713051091 end time Dec-28-10 18:02:44 PST)

After being on these forums for several months now and getting educated somewhat I have learned quite a bit about Yanmars. I am of the opinion that the tractors with the last two digits 02 all have power steering and wet brakes. Can anyone agree or disagree with that? Also, was wondering if...

This may be a lot of blah blah blah to some but not forced reading. I've always wanted one of these digital tachometers so finally bought a $26 model at Harbor Freight. First thing I did was check it out on our 2009 RAV4 and also on my old 97 GMC. The digital reads in tenths but of course the...

Anybody care to share their opinion about the copper spray made for head gasket use? Is it a good idea or not? I have my YM2002D tore down awaiting gaskets, etc. Got everything cleaned up and ready to go back together. I am not sure whether to use this spay or not. Have got different opinions...

I have an old FMC 5' rotary mower. Overall I am very pleased with it. What I don't like is when you mow in reverse the angle of the tail wheel raises the mower up higher than I like. I think most mowers are designed for the swivel action to raise the back of the mower but in my opinion it raises...

Hello out there, My YM2002D has an engine code of 3T80U-NAP. This does not agree with some postings I'm seeing out there. Are there any YM2002 owners that would want to reply with your engine codes. I don't guess it makes any difference but I have a large curiosity. Thanks, Winston

My 2002D tachometer cable leaks where attached on housing in front of engine. One fellow said the housing would have to be changed to stop this. Any other advice out there? Also wondering what John Deere would be closest match to this Yanmar? Thanks, Winston