Search results

That pump that I have it turns the PTO at 400 RPMs, but the shaft is a one and a half to one so my blades are spinning at 600 RPMs it works better on it than it did on my yanmar tractor It cuts underbrush really well ,briars and thickets. You just raise it up over the top of them set the blade...

Older scag sthm tram pump will fit in older twenty four twenty five and the twenty four twenty two powertrac.Ask me how i know…

I have a 2001 2425 that the tram pump that drives the wheels quit working. Upon removing the lovejoy coupler i found the keyway fubar. (See pic below) does anyone have any suggestion as to resolve this? Called terry and another pump is 6 thousand and some change. I was thinking about machining...

I’ve searched many times for a good lubricant for the ball joints on the end of the hydraulic rams on the power tracks and I found this one by accident, but it works the best out of everything I’ve ever used. I wanted to pass it along so anybody else could try it and let me know what they think...

Just found this listed on Facebook marketplace they’re asking 5000 for the unit with the backhoe, a bucket and an extra set of forks its locared in Charleston WV.

Found these on amazon thought i would share them. I am getting them for my 2425. I will use one for the engine tach, hours and temp, and use the other to monitor my hydraulic temps on my pumps. I think it will be a little more insurance to prevent me overheating anything unknowingly. Also...

Was reading postings earlier about putting PT in tow mode and had a thought. I wonder if i can do this in the winter months to make the cold starts easier on my engine and starter. When the pump is set to bypass does it relieve the pressure from the pump making it easier to turn over? And would...

Does anyone out there have a old running or non running subaru Eh 72 -2 series, 23, 25 hp or the efi model they would like to part with? I am looking for a couple of donor units to keep the one i have going for a while. I cant afford a new kholer, so i am hoping to keep this one running untill i...

For some reason, my pics will not come up on the other post that I sent it in so I’m actually sending this out so you can see the pictures In the first pic notice that i blocked off the area that is under the engine mount plate as well.

I have found out on my Robin air- subaru EH 72-2 in my 2425 that makes a BIG difference on its cooling ability if you get some foam padding from walmart and fill the gaps between the engine and the tub of the machine. You can get is usually in the arts and craft isles. I get the one that is 2...

I had been mulling over the idea of installing an additional oil cooler on my 2425, when it gets hot down here in Georgia it doesnt take long for the oil in my hydraulics to start getting pretty warm, i can tell when this happens because i lose power to my drive motors.( it takes more pedal to...

About a month ago, I started having my steering unit leak on my green machine (that’s what my wifes name is for my 2425) It wasn’t that bad at the time so I decided to wait before I pulled it off and had it serviced through Power Trac. Last week One of my drive motors started blowing oil out...

Did a trade with a person near me and ended with a older 60 inch brush cutter as well as a 60 inch finish mower. I didnt think i can use either on my 2425 but thought someone out here on the sight may be interested. I will be posting pics and more info soon here are a couple pics i have at the...

I am wanting to do something like this for my 2422 I have the donor already but need to get a hydraulic motor to run it off my aux lines. If anyone has any suggestions for me for the hydraulic motor to use for the configuration of this, i would appreciate any input. Here is a pic of the donor i...

I broke the pivot arm on my 2422 again, have it apart already and waiting for the machine shop to turn down another section of round stock to replace the broken one, this time i am going to have the center bar supported with corner bracing so it will not flex as easly, distributing the...

Just acquired a L210 and am looking for a donor tractor to get transmission parts for the one I have, I live in N.E. Georgia if there is anyone that has one of these to part with.

I’m trying to find out the specs for the pump motor on the 48 inch mower or the 48 inch brush hog for the PT 2425. I am wanting to get a mower deck or 4 foot brush hog and modify it to use on the front of my 2425. I want to use it for clearing lines in the woods for deer hunting, mowing down...

Been having the issues known for the hard starts from my PT when it’s cold and decided to do something about it. I purchased a 700 cc amp battery and bought some welding cable and new ends from Napa and custom made a set of cables for the little beast. It seems to have resolved my problems. I...

Have you been going through the woods on your Power Trac and all the sudden pssssssssssssssss you have a flat. Get the tire off only to find out that the inside valve stem has been clipped off by a tree branch or piece of wood or something. I have a solution that I hope will curb this issue. I...

Is there anyone looking for a backhoe attachment for a older 2422 - 2425 ? I have one and am considering selling or trading it for other attachments.I have two buckets for it as well. I am looking to add a brush cutter, boom mower, or tree shear to my collection.

Hey everyone, I just tried to open my app in my iphone abd it said it is no longer available, have anyone else experienced this? I just purchased a new phone and havent had ani issues untill i bought the new phone. Is it just on my end or did thet get removed?

Well yesterday was a first, my commercial mower quit on me up the driveway so i went to get my 2425 to move it back to the garage to work on. I have done this in the past and didnt think nothing of it. ( I forgot that i had taken the backhoe attachment off and didnt have the ballast on the rear...

Received a muffler from Farmall140 (Thank you VERY much Sir) But the unit would not fit. I had to modify it so i could install it on my 2425, but i think it turned out pretty well. Had to cut muffler off end then shorten the exhaust end about 3 inches, then rotated the muffler down 90 degrees...

Well my starter started acting up so i decided it was time to pull the engine and do the repairs i have been needing to do to my PT. My parking brake cables were getting to the point where they would not work properly so i am pulling them both out and servicing them by cleaning the cables...

Went to lift a tote of wood heard a pop and my forks would not tilt. Upon closer examination i discovered the pivot point on my lifting arms thatcontrol the machine broke…. I guess it did pretty good considering its a 2001 model. 21 years is a pretty good run i think. I wonder if i can get it...

I currently have a Subaru 25 hp engine in my 2422 chassis but am having issues with keeping it running steadily. Im considering installing a Predator 22 hp engine into my unit and see how it does. I can get the additional warranty to guard against failure or any other issues. I dont have any...

I currently own a 2001 2422 that has been upgraded to the 25 hp enging making it a 2425. I have also put a new aux-steering pump in as well as new tires. I have been mulling over the idea of getting a newer unit but i am not sure if it is something that will be a benefit for doing. It does need...

Been kicking around the idea of selling my backhoe attachment for my 2425. Possibly trading for other Q.A. That will fit my 2425. I am looking for a rake attachment,a tree hugger or a 5 ton shear to add to my collection. Will consider other items to barter with to trade or cash. I live in NE...

Does any one in the area if NE Georgia have a tree shear For the T8 class I could beg borrow barter for or steal for about two weeks? I need to clear some acreage of several hundred saplings and small trees 3- 6 inches in diameter. Would like to try the shears out and possibly buy them if they...

This was done to my stump grinder before I bought it. Didn’t know it was a mod until I saw the ones at PT. Keeps wood chips from flying everywhere. Hope it helps someone out there.

Most of you know where I am today !!!!!

Has anyone used or had experience using the Lane shark bush hog? It has caught my attention and I’m thinking it would be a good match for the PT line up. See photo attached It can be turned out and angled to mow ditches or the banks of the pond or creek. It can be turned up on its side to trim...

I have a 2001 PT 2422 that has the Subaru engine 25 hp. It came new with the 22 hp but since was upgraded. My auxillary pto - steering pump assembly is a 8 gpm 2500 psi gear pump. My question is when I replace the pump assembly which is weak, I am thinking of putting a 10 gpm 2500 psi pump...

Has anyone out there had any experience with this style of Diesel engine? I was wondering if utilizing one of these in a PT would be any advantage. I would think that they would have more torque, so if you wanted to put a bigger pump on for your aux, pto you should be able to. They make a 30 hp...

Here is some info I have found in my search for a pump replacement it is the information for the pump on my 2422 -aux - PTO Pump. Hope this helps some others out there. You can use the breakdown on the last page to find out the exact specs on the pump you have if it’s a Intertech, which is...

Does anyone have al old bad motor that they are willing or wanting to part with? I need the front plastic cover and the cooling fins that mount to the flywheel assembly for the 25 hp Subaru engine , numbers 1 & 7 in the picture attached

Took possession of my new project a 2422 that has had the engine upgraded to a Subaru 25 hp. The engine has about 10 hours on it since new. I found out by experience now the hard start in cold weather. :) Am going to look into getting a stronger amperage battery to turn over faster, and also...

I have seen different sites on the web selling the MY1500 and some advertise different engine hp. I was under the assumption that they were all 15 hp but like the one here it claims 18 hp. Are some of the tractors outfitted with larger hp than 15? If so how do i find out which mine is ?

Does anyone know where the redline is on the ym 1500 diesel engine?

I recently purchased a 2001 Pt 2422 that has the upgraded 25 hp motor. The question I have is if I installed a larger oil cooler to increase my cooling capability on the engine and on the hydraulics, do you think it would be sufficient to operate a brush hog, or finish mower? I know about...

I have a power rake attachment and not sure how to use it or what it’s purpose is for the power trac configuration, it looks as if it could be used for removing roots, small trees and leveling ground. Does anyone have experience with this attachment?

Called power trac and they will make you a book with parts manual, maintenance manual, service and repair manual and send it to you if you so enquirer. Pretty nice in my opinion

Have recently purchased this unit with several attachments and trailer and am trying to figure out the specs, limitations on weight, etc.... hope someone could give me more info on specs. It originally had a Robbins- 22hp, but has newer 25 hp Robbins with about 10 hours now.