Search results

Buy used, you will save money. I bought one and sold it a year later for what I payed for it

Halfway around the world..it is 2 states over but thank you, someone sent me a part number so I can find it

Yes that is it I will look for that part, thanks so much for your help

I don't have any specs, it broke off

I need the plastic PTO bushing for a 2020...Hoye wants $15 plus $25 shipping and I am not paying that inflated shipping for that small part amount. Any ideas, have a 3D printer but can not find a file

I need to do some brazing and wanted something that would do a decent job. I would mostly be using it on 1/4 to 3/8 rod that is brass. Would this work?? I would like to use a type B tank and not spend a lot

I have a Chief cylinder that has plugs in the two ports..... looks like 1/2 pipe thread but it is not. Wondering what size this might be as it is just slightly smaller..... anyone know as I will have to order a fitting.

Well after trying stick welding I have decided I hate it... Too many variables. I love MIG, have a Hobart Handler 140 and though I would get the Hobart Ironman 230 as it will weld up to 1/2" and that would work for anything I would ever do. Anyone have this machine? Likes dislikes?

I have a cylinder that is 36" from center of hole to center of hole while closed... I am trying to figure out what will be the length when extended fully. Can I put air in the cylinder to extend it? This is all new to me and I am trying to make a log splitter. Any formulas.... The label on the...

Anyone using 7014 rod? I am thinking of using it over the top of an ugly 6011 weld. Seems like it would make a pretty bead and already have the strength of the 6011. Tried 7018 at 90 amps but it is difficult to use and I need more practice. Welder is an Everlast 200ST

When a welding rod has a xx2x designation and says it if for flat or horizontal what the "H" is the difference .... seems the same to me. ??

I want to use 7024 rod for repairing a wood stove and was wondering if anyone has used it? I can not find smaller quantities so I will have to buy 50lbs which if it will run right I have no problem getting. My interest in this rod is it is a drag rod and seams to put down a pretty bead. What...

You need one of these I did 600ft of gravel road and it works like a charm.

I am in need of a more powerful welder, I have a Hobart 140 handler mig and want a stick welder. I have narrowed my choice between these 2 welders as they fit my budget and never having used stick need some advise on which to choose. I want to be able to weld 1/4 to3/8 steel but mostly 1/4"...

This looks like it is in nice shape and a good price... take a look :cool: 1990 YANMAR F-15-D 4X4 TRACTOR

Saw this YM1610D for sale on ebay. He is in IL ...current bid $1700. Might be good for someone. 1984 Yanmar YM1610D Four Wheel Drive three cylinder diesel Tractor with box blade, bush hog mower, flat blade, 3 speed power take off (PTO), differential lock -- has 1271 hours. Call Steve at...

What would you recommend for an inexpensive cutoff saw? Are used ones a big gamble?

Middle of NC .... 45 here at 5am ...may get up to 60 today, I am happy!!

Just wondering if i can use a scuba tank for a CO2 tank for a mig welder? I can get one free ...so the price is right. I priced out a regular CO2 tank and they are around $100.

There are a few YM tractors for sale around Charlotte if anyone is interested. charlotte farm & garden classifieds "yanmar" - craigslist

Found this Massey on ebay Looks great and a nice price!1 Check it out ...MASSEY FERGUSION 1085 DIESEL FARM TRACTOR | eBay

While tilling deep to plant potatoes I shifted the transmission into crawl as i was not doing a long run and was wanting to till rean fine. When I was finished I could not get the crawl pop up to release and was locked in that position for quite awhile. Finally got it to release and wanted to...

YouTube - ?????????????YANMAR ??????

I found a hole on the bottom of the bearing cover on the non gear side of this RS1400 yanmar tiller. It was full of dirt and the bearing needs to be replaced. I can't seem to get the bearing out used PB Blaster on it for days and there is not enough space to get a gear puller under the outer...

I am looking for a PTO 1 3/8 6 spline on both ends that I need for a Yanmar RM1400 tiller 22" end to end when closed.... any thoughts as to who might have one or who makes custom PTO's without breaking the bank?

I found a 1400 tiller 5ft for $300 Photos shoe a little surface rust but looks good. Do you that have this tiller have any problems and what should i look out for? I want to put this on a YM2020

FYI There is a nice YM1700BD for sale on ebay in Tenn if anyone is interested

I need to change the hydraulic fluid on a YM2020 The one under the transmission is obvious but there is another plug more to the rear under the belly aprox in the same area as the seat. Wondering if i need to remove this as well or is this something different. Also the screen that needs cleaning...

Finally freed the shut off for the fuel filter but now it leaks just a little as i am sure the "O" ring is old and dry. Looked for just an "O" ring to replace but can't find one and i can't see spending $50 for a replacement fuel bowl and shutoff. Anyone have a good source or suggestion.

When I changed the oil on this YM2020 it looked very black almost as if it was never changed in the 500 hours on it. I am thinking of changing it again in about 5-10 hours use. Should I add an oil treatment? and if so what would be the right choices. I used Rotella T 15-40

Anyone have a good way of storing implements so they are out of the rain and easy to get to and hook up ?

Who sells good manuals both user and parts/repair?

Is powershift worth the extra money and does having it a cause for more mechanical problems down the road ?? Also what do you guys think of a YM2000 vs. a YM2010 ..if you had to choose which would you buy? Thanks Robert

I can buy a Hinomoto E14D in what looks to be good condition with about 700hrs on it ....Think it would be worth it??

I live near Charlotte NC (or 100 miles) and wanted to know if any of you knew of a reputable dealer around this area. I am looking for a Yanmar either a 1500 or 2000 with a loader. Thanks for the help.