Search results

Just lifts the front. Yes, that’s the one. Will probably give it a try.

I have an X320 with 54 inch deck. Looking at the Craftsman lift for machines up to 500 pounds. Not sure how much the front end weighs. Any ideas?

What would be best for final coat. Gloss semi gloss or satin?

Is this product worth the effort?

I was looking at the screws on e trailer site and they were running 1 dollar each. Ones at Lowe’s were around 30 cents. What’s the big difference? Picture of Lowe’s product.

Can I use the old holes in the cross member or need to drill new?

I like overkill. What would you use to get the rust off? Any “best” primer and paint? Thanks

Here is a trailer I am rehabbing. 6x10 and at least 10 yr old. New floor for sure. Has full 1 by 5 1/2 PT now. Would you use same or go with something else? The boards are “trapped” on one end and 1/4 inch trailer deck screws on the other. There is a support every 24 inches with 2 deck screws on...

Recently talked to JF dealer and they say that their lift is no longer available. Their book called it a Mo Jack. Has anyone else ran into this problem?

Have a 16 drive over deck on my 2025r. Not quick attach. Anyone know of a video out there that goes they the process?

Have a 16 2026r less than 300 hrs with drive over mmm but not quick attach. Have to crawl under and connect front and then back plus the driveshaft. A real pia for this soon to be 73 yr old. Was thinking about trading for new 2025r with quick attach deck. Is the quick attach really as easy as it...

Trying to change fuel filter on above. Manual says to turn counter clockwise. It won稚 budge. Can稚 find a video on line but the 1025 video shows clockwise. This is the first filter change at 300 hrs. Any ideas? Thanks.

Along with normal oil change and filters, line, what other little things do you do before cutting season? I cant find any guidelines for spark plug/glow plug replacement.

My backyard slopes slightly toward house and floods flower bed. Am working with JD 2025 with bucket and box blade. No underground utilities in this area. Any ideas?

I've had my 2025r a little over a year. I have a 62 in drive over Mmm. So I decided to take the mower deck off. Watched video and followed directions. Could not get it off. Then discovered I had to crawl under and disconnect the pro as well as tie up the front mower mount. Looks like I got...

Last week I hand dug a 200 ft trench to extend hose bibb. I glued the pvc and placed in trench. Then a 2 day storm moved in with 6 in of rain. What was once buried 10 inches is now at 4 inches due to erosion. Short of cutting pipe into manageable lengths, removing and re digging, any ideas how...

I have JD2025 and am really tired of climbing up with a 5 gallon can of diesel and pouring it in. Sooner or later I'm going to bust my butt. I don't use it enough to warrant A tank and fuel delivery. Any ideas?

2025 with mid mount and approx 20 hrs Yesterday mower blades stopped spinning when pro pulled out and selection lever in mid mount. Had run fine since new and yesterday mowed 3 acres before problem. I stopped to add fuel and started mower and pulled out pto. No blade spin. Pto lite on. Tractor...

Tried to post pics. Looks like it almost worked. Anyway you can see the attachment points and the space that I am concerned with. It might be normal and thats OK. Might be making a big deal out of nothing. No pic of the top hook. It has about 1 inch on either side of the bushing at top of quick...

Got my Frontier 2060 box blade for my 2025 JD and quick hitch. All went well with hook up with exception of the cat 1 pins. They stick out about 4 inches and lower hooks of quick hitch grabs them fine. I do have to use the bushings supplied by JD. The bushings are held onto the pin by a Clovis...

Taking loader off was no problem. After a month I try to reattach and seems loader latches are too low to go into the tractor bushings. If I drive forward my suspension hits the parking stand. Seems like the stand needs to be back further and loader needs to be lower. Any ideas? Thanks.

Need a box blade for new 2025r. Is the Frontier 2060 too much box blade for this tractor? BB info says its for 19-45hp. 2025 is 24 hp. but weighs 465 lbs. the 2025r is a little over 51 in wide so would the 2048 BB be better or not wide enough? Thanks

Got the 2025r and love it with the exception of the dismount. Seems as if I am either sticking the pro selector up my arse or digging it into my back. Anyone else have these problems?

Just got the new 2025R delivered. Have several questions: The 3 pt hitch and the mid mount mower deck both operate up and down at same time. Is this correct? I have a loader too. The bushings for the quick attach for 3 pt hitch are about 1/2 to 3/4 in short for my box blade (not john deere). Do...

Will an A & B box blade fit with the jd quick attach system?

What is the best size box blade for a CUT that has back wheel width? I have looked at the 48 in and the 60 in. The 60 looks really heavy for the 25 hp JD 2025r.

What kubota compares hp etc to jd2025r?

Very frustrated with JD regarding the purchase of a new 2025R. Sales person is difficult to contact and won't return calls. Said it would be here by 8-1. Messages left and no return calls. Guess if I'm not a cotton or peanut farmer buying a 350k piece of equipment I'm not worth much to deere.

I have been looking to pull the trigger on a 2025R but then saw the specs on the 2032R. Other than HP they seem to be real close. However, the AGPRO dealer wants $4000 more for the 2032R. Seems like a lot of money for 7HP. Is it worth it? Would I recoup it in trade later on? Thanks

Getting ready to pull the trigger on a new 2025 with FEL and 62 in MMM. I was thinking about ballast for the rear. I have always had a drag behing mower and a box blade too. Never considered needing ballast. I guess JD makes the suitcase weights. I still have my boxblade if needed but not sure...

I have the above mower which is 12 yr old. never really did anything to it but grease, change gear case oil and sharpen blades. A week ago the belt slipped off and I put it back on and adjusted tension spring. Today after about 1/2 hr cutting short grass belt came off again. I can see the belt...

Looking to trade the 4110 with FEL, Box blade, and BH RDTH 60in finish mower. I am wanting to stay with JD, but what compares to the 4110? I will be wanting the same attachments, but a MMM instead of a drag behind finigh mower. Thanks

Getting old I guess, but has anyone swapped out the seat on their 4110 for something more comfortable?

Had the X320 about three weeks now. Right at the 8 hour first oil/filter change. Here are several observations: Seems as if it drinks a lot of fuel. Capacity is 3.3 galons. It takes that to mow 5 acres (mostly at top speed).. It has a cruise control which I used one time. Today it doesn't...

I know this is a long shot, but it's worth a try. I have a 12 year old 025 that might have reached the end of the road. Last week it became hard to start and was flooding. Letting it sit awhile would get it going. Now, won't start at all. Even without choking it when starting, it floods so bad...

Background: 4110 HST has been in storage for a year. Part of the time it was outside but covered. Squirrels at the positive cable from starter to battery. I replaced that. Could find no other damage. Moved to to enclosed storage for the last 6 months and took it out today. It ran fine with the...

The 15 yr old GT275 gave out on me today and I am in the market for a new mower. I checked with the JD dealer and he quoted price of 3299 for 48 inch cut X300. Do they have much room to move or is that pretty much a standard price. I also looked at the D series, but was really no comparison.

I have a 4110 and a bush hog 60 in finish mower. Was considering a belly mower. All I have to mow is about 6 ac of pasture which is always fairly low...6 inchs. Really front lawn. What are the downsides of a belly mower?

I have a JD 4110 tractor with loader and 3 point hitch with box blade. I have about 50 old fence posts that I need to remove. Hopefully they are not rotten. How would you go about removing them? Previously I had wrapped a chain around them at the base and then hooked the chain to the loader...

Has anyone done this? We are buying a house which has an 18 x 36 below ground pool with vinyl liner. I has about 3-4 ft of concrete around it. It is in bad shape and since we have had 4 pools in our life, we don't want the 5th. I am told that these pools have metal sides below grade and then...

I have a JD 4110 with a small BushHog mower. When connecting to driveshaft to the PTO spline, I need to remove 3 white connectors that keep the guard on. These are about 1.5 inches long and have a slot on top to turn with screwdriver. You turn it counterclockwise and pull it out. The guard then...

I have a10 ft landscape trailer with a 4 ft tailgate ramp. I need to load my bushog finish mower onto the trailer. Tractor is not available so I will need to use a come a long or something similar. Any suggestions on how to do this?

I have a Rubbermaid lawn cart that is 8 yrs old or so but in good shape. they currently cost about 250 new. Problem is that the metal wheel rims are rusting and tires will not hold air. rust is in about the place water would pool up at the lip of the rim. Looking on the internet, Rubbermaid...

For lack of a better description the dashboard of my gt275needs replaced. The steering wheel, brake, lights, etc all come thru it and will need to be removed. Anyone ever done this before? Thanks. What looked to be easy is now very diffucult.

I have a 48 inch "mulcher compatable" mower deck on my GT275. There is a tag on it that says "serial number" with a long bar code and also has "M0048DF102360" on it. Is the M number the model number? I am looking at a LX188 for parts and was wondering if the decks are interchangeable. How can...

I am replacing a front seal on my 4110. This seal is really a foam gasket that is attached underneath the hood. It is the one closest to the front of the tractor. The new seal has a slight offset and I cannot determine if the offset goes on the right or left side of the hood. Can someone take a...

Well, I rescued my 4110 from outside storage at a friends house. Mice and squirrels ate a bunch of rubber and gasket items which I will have to replace. Several questions: There are rubber/plastic shrouds on the back of the headlites that were eaten away by mice. Kinda look like a small drain...

Is there a difference in the machines these stores carry? Thinking about replacement cost of The GT275 I mentioned.

Posted here before about this machine. GT275 with 48 inch deck, hydro trans runs good. Along with the previously mentioned hood cracked and gone to heck, I hit a tree root with the back guage wheel of the deck and knocked it completely off. Deck had rusted and now a hole where the guage wheel...

During a move, I had to store my JD4110 at a friends house (outside). After about a month, I checked on it yesterday and find that either squirrels or rats had built a nest on top of the air cleaner, PLUS had eater various rubber parts under the hood such as weatherstripping and some shrouds...

Is there a better battery than the stock battery for the 4110? One that will fit in the original bracket? Thanks

I have a GT 275 that is at least 10 yr old. Looks bad but runs good. The upper and lower hood are broken and half gone..$300. The mower deck has holes in it....$700. $1000 to get it in decent looking shape, but I still have a 10 plus yr old mower. I also have an old Craftsman that is worth...

I will be storing my 4110 at a friends house for at least 6 months. I will probably get over to drive it around every two weeks or so. Any thoughts as to what else I should do? Any fuel stabelizer needed etc? Thanks

Anyone have any experience with these? Saw one at Wally World today and looked neat, but was wondering about the strength, since part of it is tubing for the extension.

I have a 10 ft landscape type trailer used to tow my Mule. I bought a spare tire mount at TSC today and was a Pain to put on. I was trying to mount it on the front corner of the trailer which is angle stock. Instr say you can do it but fooled with it for an hour. any others out there that will...

How much can I expect to pay to have wheel bearings repacked on a single axle utility trailer? Any typical scams people try when doing this?

If I can't sell my 4110 before the move, I will have to transport it approx 350 miles. It measures a hair over 20 ft with loader and finish mower. Has anyone tried moving a smaller tractor like this in a a u haul truck? I can get a 26 footer for approx 400 dollars one way and still have room for...

We are moving Florida to Georgia and new owners are asking for a price on my JD tractor. Here's what I have and the price paid (which I know means little): JD 4110 Hydrostatic Drive, 4WD 11,513 Bush Hog RDTH 60 finish mower 1,750 JD Front end Loader 410...

In addition to the plastic hood cracking I now see that the deck has holes in it several places. Seems the holes are in the area where the outer edge/end of the blade would be. Is this from normal rust or could it be something else?

I am going to transport JD 4110 and need the weight of the following: JD 410 front loader with bucket A & B 5 ft box blade Anyone have any idea or rough estimate?

4110 has had a slow leak in front tire for about a year. Looked it up on line and 75 dollars for a Titan 23 x 8 Multi Trac. Seems like a lot. Any other places to check like TSC?

My 10 year old Craftsman mower cranks right up when cold. However, after stopping, it will not start. It cranks fast, but wont start. It smell like it is getting too much gas. I have the choke in and idle down. Any ideas?

Several questions here. 1. If I am towing a Kaw Mule on a landscape trailer, do I need to go thru the weigh station? 2. If I am driving a U-Haul, do I need to go thru the weigh station.

I have seen some combo trailer/receiver locks from Reese and Master. Are these any good or just a sales pitch. I have a landscape type trailer.

I have a 10 ft landscape type trailer that needs a new deck. Current one is 5/4 1x6 PT which is screwed to the metal frame with a torx type screw. Question: What is the best wood to use when I replace the deck? What are the chances of these screw being rusted to the metal frame and twisting off...

What would be the best way to transport a JD 4110 with RFM, bucket, and box blade? Total distance is approx 400 miles. All I have available is an Expedition and I don't think it would pull a tandem trailer with these implements. Would a U Haul enclosed truck work?

What are some reasons you need a 4 WD tractor. I say they are a must with a loader attached, but why? Any other reasons it will help? I know there are more than just helping get unstuck.

I need to trailer my 610 Mule approx 300 miles of mostly hwy, but some rough dirt roads too. I have a drive up "landscape" type trailer with D rings on both the front and back sides. What size ratched strap would you recommend and where would you attach it to the Mule? thanks

Is there any way to beat the high cost of JD dealer for tires? I need a Titan 23 x 8.50 x 12. $75 seems steep to me.

It's been about 5 years since I have removed blades for sharpening. Should the bolts be turned counterclockwise to remove. I'm getting a lot of resistance and don't want to break a bolt. I don't have a grinder to do it w/o taking them off.

Does anyone know if you turn off the breakers at the main box before you use the transfer switch? Example: Manual Switch has a circuit for Master BR. MBR in the main box is breaker 20. Does breaker 20 need to be off or on?

JD GT 275 Like most others the hood is cracked and have to lift off and on. Are there any aftermarket dealers for hoods? 10 yrs old and still running strong. New hood would cost $200.

Is there a good procedure to use when sharpening blades on RFM? Are concrete blocks OK to use to hold up the mower. I know I shouldn't rely on the hydraulics. What about a difficult blade removal?

The lynch pins on the wheels of my BH keep getting pulled off (and then the wheel and spaces fall of) when backing under brush to cut grass. Any solution for this other than to stop backing under brush? JD dealer acted like it happens all the time. Thanks

I currently have a Bush Hog rear finish mower and am thinking about going to a mid mount mower. I could then cut more grass around the house, where the rear mower's wheels gouge out the turf etc. I have a front loader that I leave on all the time. What will a mid mount do to the balance? I also...

JD 4110 with approx 2 year old battery. Last started it approx 1 month ago. Nothing unusual. Tried to start it today and nothing. No lites or guages. Battery was VERY corroded. Cleaned it up and charged it. Still nothing. All levers (PTO etc in proper position.) Any ideas before I go buy a new...

Another question about property lines/neighbors. My neighbor has a 50 ft wide piece of property that he uses as a drive back to his property. that 50 ft wide piece is next to my property. I have a fence (wire field fence) along that side. It's 1000 feet long and I dug each posthole by hand and...

JD4110 no start. Looked at the battery and + side was very corroded. Cleaned it up and the cable is eaten thru. I removed the cable and battery. I had to cut the cable to get it thru the small hole it goes thru right next to the battery. Questions: What size/type of battery should I replace it...

Any tricks to removing the front wheel. Any special tools? Thanks

What is the best procedure to dig out an 8 inch oak stump? JD4110 with FEL.

What can I expect to pay for a new 610 4wd? They list for $6699. I live in Florida.

I bumped a tree with my bucket. Long story...don't ask. The part of the bucket that is damaged is the top edge...directly above the cutting edge. It is dented in about 1/2 inch and the entire dent is about 1`2 inches long. Can this be fixed? It doesn't hamper the buckets ability to laod or...

I'm looking at utilility trailers. 5 x 10 is the size. is there anything I should be looking for in the way the trailer is constructed?

I have ordered a 410 loader with 52 in bucket for my JD4110. Is a toothbar helpful for a small tractor such as this? Where can I get one and how much?

Well, ordered my 410 loader today for the 4110. that's the good. Bad is that it won't get here until Jan 5th!

My dealer gave me a price within a few dollars of the JD website price for the 410 loader. The web price shows the ballast box as standard, but the 49 inch bucket. The dealer has that identical price without the ballast and a 53 in bucket. Dealers price is an installed price, but don't know if...

Looking for someone with a JD 410 loader. Several questions: I have a box blade attached. Do I need a ballast box? Is the 49 inch bucket OK? Is it difficult to attach and detach the loader on the JD4110? Thanks

I am borrowing a JD skid steer loader this weekend. How difficult will this be to learn to opperate?

What size chain harrow for JD 4110, 20hp diesel?

How iss the best way to work a truckload of dirt that was just dumped. Seems as if I back up to it to drag it out, the back tires go up and it won't let me gt a good load. Any suggestions, other than to get a FEL?

My neighbor works at a sand mine and offered to bring home an excavator and dig a pond for me. He did this last weekend. He spent 10 hours. I paid the $300 delivery and pick up fee for the machine. Although he said he doesn't want anything, I want to pay him something. Any ideas? The going price...

Are there any tricks when it comes to removing the blades on Bush Hog finish mower?

Need to build a dolly for 5 ft box blade. 2 x 4 or 2 x 6's? What size or weight bearing wheels? Thanks.

Live in central Florida and plan to dig a pond that measures 60 ft by 120 ft. Water table is at 4 ft and I want it to be 5 ft deep. No dam etc, just a hole that will fill with water. What would be used to dig this? Trackhoe/excavator? How many hours and cost per hour? Site is easy access and...

What is the best product to spray on brush along a fence row. Small oaks (3/4 in) and other misc weeds and brush. Thanks

In the process of hitting some tree branches I have lost one of the bolts attaching the lights to the rollbar. I can get the bolt from JD no problem. However the bolt is threaded into a knurlled fitting that is pressed into the plastic light assembly. Of course the knurelled fitting is gone...

How would one use a cross drawbar?

I'm having a FEL remove trees and brush. What can I use to pull behind my tractor to smooth things out. Not leveling, just to get the ruts etc out. thanks.

I am having trouble hooking up my rear mower. The mower drive shaft goes on the PTO spline about 1 inch and then stops. There are what looks to be round ball bearings in the grooves of the mower shaft. This is a JD4110 with BH RD mower. As I remember when I took it off last fall it was tough...

I have a 4110 with hydraulic outlets for FEL. While clearing brush, I jammed a stick up into the hydraulic lines that lead to the outlets. All seems Ok, but for some reason the lines look out of place. Two of the lines are on the outboard side of the deck. Can someone check their 4110 and let me...

I just passed 50 hours on my 4110 and have bought all the stuff needed to change oil and fltr on the engine and trans. I have read the manual and it sound fairly straightforward. Are ther any problems I shoul watch for? Any helpful hints?

I have a JD 4110 with 3PH. It's about 6 mo old with 50 hours. I have noticed that the control lever for the 3PH needs to be pushed almost all the way up before I get any movement from my box blade. Are there any adjustments to correct this?

One of the teeth on my box blade scarifer broke off. Just the pressed on tip, not the scarifer itself. Can the JD dealer press another on or do I have to buy the entire scarifer. It does have 2 dimples on the teeth and two on the scarifer.

Thanks for the earlier help in getting the BB hooked up. After about 3 hours of work I got the majority of the uneveness out of the area. however, when I try to do some finish work in taking down some slight humps, I can't seem to evenly distribute the dirt in the box. End result is that I just...

I have a new JD 4110 and just detached the rear mounted mower. I tried to hook up a neighbors 4 foot box blade and seems adjustments need to be made. The center link seems easy enough to adjust. However each side arm needs to come inward about 2 inches so the pin on the blade bracket will go...

I need to pull out some small sapplings with my JD4110. Where should I attach the chains to the tractor. Thanks.

I have virtually given up on a FC boxblade. the "dealers" I call show little if any interest in even giving me a price. What would a 2nd choice be? I have a JD 4110 with a 50 in wheel span. Thanks.

Does anyone have the I-Match system? What problems does it solve and is it worth the $. Thanks.

Just took delivery of my new JD 4110 with BH RD60 finish mower. Prior to delivery they had to put about 200 lb of wieght in the front to balance it out. Even now when I raise the mower too fast it almost takes the wheels off the ground. Is this mower too much for this tractor?

Is a 60 inch BH rd finish mower a good match for a JD 4110 with 17 PTO HP? Literature for the BH mower says 15-35 hp tractors. Does this mean PTO HP or gross HP. Don't want too big of mower for this tractor. Thanks.

Now the Woods dealer is offering a 60 inch finish mower for $1650 which is $200 less than the Bush Hog. Considering construction and performance, is there $200 difference?

Does anyone have any experience digging a pond in Central Florida. I realized that this project is bigger than I want to tackle with my equipment, but need some advice.

What is a decent box blade for a JD 4110. Book says the width is 50".

Does anyone have any experience with a Bush Hog RDTH60 mower?

I have pretty much decided on the JD 4110. Here is the price quoted by the dealer (Central Florida area): 4110 HST Hyd for FEL R-3 Turf Tires $11,513 A Woods 60 inch finish mower RDTH60 would be an additional$1850. From the JD site the tractor set up is about $14,500 list. Is this a decent...