Bridge#2

   / Bridge#2
  • Thread Starter
#41  
I had to put 2 more cross-braces in...I had everything set-up for 18' 4x4's, nobody sells 18' 4x4's around here, had to use 16', so I put two more 6" i-beams in. I drilled 64 holes in the cross-braces to bolt the 4x4's to. What a job!!!
 
   / Bridge#2
  • Thread Starter
#42  
I'll post pics of the progress tomorrow, worked till dark today. "wore-out"...
 
   / Bridge#2 #43  
Piers poured on the ten foot sections. I dug the holes 3 feet with the kubota, then finished them by hand (they are 4'). The 10' sections are in with the cross-braces. Almost ready for wood.

You have really done a great job!

It sure will be a sturdy bridge when finished.

Keep posting.
 
   / Bridge#2
  • Thread Starter
#44  
I got the some of the wood-runners in, the heat here is nasty...90+..not my favorite working conditions. I put the Kubota through her paces pulling out small tree-stumps. I used the steal wheel method...worked great (wish i'd taken pics). This was a way bigger project than i thought. Its finally looking like a bridge though. Kinda got rained-out today, and i needed a small siesta. Here's a few pics of the progress.
 

Attachments

  • 2b-049.jpg
    2b-049.jpg
    356.4 KB · Views: 510
  • 2b-048.jpg
    2b-048.jpg
    280.3 KB · Views: 615
  • 2b-047.jpg
    2b-047.jpg
    341.3 KB · Views: 484
   / Bridge#2 #46  
man that bridge is looking awesome i built one a couple years ago out of two trees i cut down i will half to take some pics of it and send it to you
 
   / Bridge#2 #47  
Awesome job!

I think you'll be able to tow the Queen Mary across that bridge...

Nice work!
 
   / Bridge#2
  • Thread Starter
#48  
man that bridge is looking awesome i built one a couple years ago out of two trees i cut down i will half to take some pics of it and send it to you

I would love to see it.
 
   / Bridge#2 #49  
Why did you decide to use circular piers on oneside, and the square on the other? I also love that you have a lawn chair on each side with a beer can... Just so you have a good resting place close by? ;-)
 
   / Bridge#2 #50  
How wide will the finished bridge be when finished? Looks too narrow for a tractor from the photos?
 

Tractor & Equipment Auctions

Kubota L3130 (A53317)
Kubota L3130 (A53317)
2019 CHEVROLET SILVERADO 11FT FLATBED (A57880)
2019 CHEVROLET...
2016 KBH Fertilizer Tender Trailer - Isuzu Diesel, Hydraulic System, Rear Discharge (A56435)
2016 KBH...
2014 Nissan Pathfinder SUV (A55853)
2014 Nissan...
2008 Ford F-250 Lariat 4X4 - 303,424 miles - 6.4L Powerstroke -Automatic (A56435)
2008 Ford F-250...
2020 John Deere 304L Wheel Loader w/ LM90 Worksite Pro Bucket (A55315)
2020 John Deere...
 
Top