Bridge#2

   / Bridge#2
  • Thread Starter
#41  
I had to put 2 more cross-braces in...I had everything set-up for 18' 4x4's, nobody sells 18' 4x4's around here, had to use 16', so I put two more 6" i-beams in. I drilled 64 holes in the cross-braces to bolt the 4x4's to. What a job!!!
 
   / Bridge#2
  • Thread Starter
#42  
I'll post pics of the progress tomorrow, worked till dark today. "wore-out"...
 
   / Bridge#2 #43  
Piers poured on the ten foot sections. I dug the holes 3 feet with the kubota, then finished them by hand (they are 4'). The 10' sections are in with the cross-braces. Almost ready for wood.

You have really done a great job!

It sure will be a sturdy bridge when finished.

Keep posting.
 
   / Bridge#2
  • Thread Starter
#44  
I got the some of the wood-runners in, the heat here is nasty...90+..not my favorite working conditions. I put the Kubota through her paces pulling out small tree-stumps. I used the steal wheel method...worked great (wish i'd taken pics). This was a way bigger project than i thought. Its finally looking like a bridge though. Kinda got rained-out today, and i needed a small siesta. Here's a few pics of the progress.
 

Attachments

  • 2b-049.jpg
    2b-049.jpg
    356.4 KB · Views: 510
  • 2b-048.jpg
    2b-048.jpg
    280.3 KB · Views: 615
  • 2b-047.jpg
    2b-047.jpg
    341.3 KB · Views: 484
   / Bridge#2 #46  
man that bridge is looking awesome i built one a couple years ago out of two trees i cut down i will half to take some pics of it and send it to you
 
   / Bridge#2 #47  
Awesome job!

I think you'll be able to tow the Queen Mary across that bridge...

Nice work!
 
   / Bridge#2
  • Thread Starter
#48  
man that bridge is looking awesome i built one a couple years ago out of two trees i cut down i will half to take some pics of it and send it to you

I would love to see it.
 
   / Bridge#2 #49  
Why did you decide to use circular piers on oneside, and the square on the other? I also love that you have a lawn chair on each side with a beer can... Just so you have a good resting place close by? ;-)
 
   / Bridge#2 #50  
How wide will the finished bridge be when finished? Looks too narrow for a tractor from the photos?
 

Tractor & Equipment Auctions

2024 FORD F250 SUPER DUTY BED (A57880)
2024 FORD F250...
We Don't Dial 911 Wall Art (A55853)
We Don't Dial 911...
2013 Jeep Wrangler 4X4 SUV (A55853)
2013 Jeep Wrangler...
2014 Ford Taurus AWD Sedan (A55853)
2014 Ford Taurus...
Year: 2015 Make: Ram Model: 5500 Chassis Vehicle Type: Truck Mileage: Plate: Body Type: 2 Door Cab; (A55852)
Year: 2015 Make...
2021 International HV507 4x4 12ft Single Axle Dump Truck (A55852)
2021 International...
 
Top