BX23 vs BX24?

[IslandTractor]

LBrown59, You are clogging up bandwidth replying to old posts. Read the whole thread before shooting off your multiple one liner posts, please.

 

[LBrown59]

LBrown59, You are clogging up bandwidth replying to old posts. Read the whole thread before shooting off your multiple one liner posts, please.

Just how is this an old thread when the last post on it was today before I posted ??
If this is an old thread just what in the heck is a new or current
thread?????????????????????????????????

 

[Renob]

Mr. Brown,

From the sounds of your very strong dislike of the new BX24, you must have spent a considerable amount of time on the new tractor.

Please list, from your vast experience, what the differences are that you don't like.

Firsthand knowledge like this is very helpfull, as opposed to some fool spouting off when he has no firsthand experience with something.

Thanks in advance,

 

[Billy_S]

>> am going to order that BX thumb and skidplates from Brotek <<

Northland, what's a "thumb?"

 

[Northland]

>> am going to order that BX thumb and skidplates from Brotek <<

Northland, what's a "thumb?"

a "thumb" is a device that attaches unto a backhoe arm above the bucket and acts as a mechanism that allows the operator to pick up rocks, logs etc., - very neat idea. look at the woods site for an example

 

[Northland]

No question, it is just the LA302 loader I was arguing against. If you could get the LA352 that tractor would be fine for your intended use.

The dealr from Michigan just called me. Apparenthly he has a client who wants to trade his 2005 7610 w/302 (150 hrs) and 3 month old 4672BH in on a L series. I can buy this for US$17500 - serviced, tires filled, tooth bar with a block heater. I know it's a bit pricy and only has the 302 loader but to me it's still much cheaper then what else I have had available to me. I think I'll buy it

 

[IslandTractor]

No question, it is just the LA302 loader I was arguing against. If you could get the LA352 that tractor would be fine for your intended use.

The dealr from Michigan just called me. Apparenthly he has a client who wants to trade his 2005 7610 w/302 (150 hrs) and 3 month old 4672BH in on a L series. I can buy this for US$17500 - serviced, tires filled, tooth bar with a block heater. I know it's a bit pricy and only has the 302 loader but to me it's still much cheaper then what else I have had available to me. I think I'll buy it

Life requires compromise . So long as the overall package makes sense to you that sounds fine. I guess the only other issue is whether you can tolerate waiting a bit longer for something else to come along. I was in a similar situation a year ago and got my CK20 HST with FEL with 28hrs on it as well as new rear remotes and new BH for $14,800. Kubota's hold their value a bit better so maybe that is an equivalent deal.

 

[IslandTractor]

Just how is this an old thread when the last post on it was today before I posted ??
If this is an old thread just what in the heck is a new or current
thread?????????????????????????????????

I miss spoke...I meant old post. You were responding to a post made last week or earlier and there had been several developments in the thread since then that made your reply redundant.

 

[IslandTractor]

Northland,

Check out the TBN classified:

04 Kubota 7510HSD with LA302 loader. R4 tires, folding ROPS, 2 range 4x4, loader has scratches from use, but tractor looks brand new. Stored in garage since new. Can send pictures by request. $11,500

The 7510 would be just as useful as the 7610 for your purposes I think.

Ohio ain't all that much further than Michigan.

 

[LBrown59]

LBrown59, You are clogging up bandwidth replying to old posts.

How does posting on an old thread use more band width than posting on a new or current thread?