Grease zerk question (b2620 w/ QA from b3200)

[DieselDon]

I have a new b2620 with the quick attach (FEL) from the b3200. It's amazing. There are supposed to be 6 grease points per side on the FEL, but there are only 4 zerks per side due to the QA.

It's obvious (black grease collecting dirt) that the QA has two grease needs on rotating pins, but those pins are attached by bolts. How does one get the grease inside the pivoting area?

Thanks

 

[Verticaltrx]

You have the wrong pins in the quick attach bracket. You reuse the greaseable pins that were in the bucket on the QA. The solid pins that come with the QA are to go in the top hole of your attachments.

 

[DieselDon]

Thanks for the insight. The dealer, during set up, has done a few things wrong but they've more than made up for it.

I'll hunt down the correct pins.

Thanks again