Grease zerk question (b2620 w/ QA from b3200)

   / Grease zerk question (b2620 w/ QA from b3200) #1  

DieselDon

Member
Joined
May 30, 2011
Messages
42
Tractor
B2620
I have a new b2620 with the quick attach (FEL) from the b3200. It's amazing. There are supposed to be 6 grease points per side on the FEL, but there are only 4 zerks per side due to the QA.

It's obvious (black grease collecting dirt) that the QA has two grease needs on rotating pins, but those pins are attached by bolts. How does one get the grease inside the pivoting area?

Thanks
 
   / Grease zerk question (b2620 w/ QA from b3200) #2  
You have the wrong pins in the quick attach bracket. You reuse the greaseable pins that were in the bucket on the QA. The solid pins that come with the QA are to go in the top hole of your attachments.
 
   / Grease zerk question (b2620 w/ QA from b3200)
  • Thread Starter
#3  
Thanks for the insight. The dealer, during set up, has done a few things wrong but they've more than made up for it.

I'll hunt down the correct pins.

Thanks again
 

Tractor & Equipment Auctions

2019 BANDIT ZT1844 RUBBER TRACK STUMP GRINDER (A50458)
2019 BANDIT ZT1844...
1956 641 Workmaster with PTO Tractor (A48837)
1956 641...
2017 JLG G5-18A Telehandler (A50490)
2017 JLG G5-18A...
2025 Swict 84in Bucket Skid Steer Attachment (A50322)
2025 Swict 84in...
2018 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A50046)
2018 FREIGHTLINER...
UNUSED RAYTREE QUICK ATTACH STUMP GRINDER (A50460)
UNUSED RAYTREE...
 
Top