Grease zerk question (b2620 w/ QA from b3200)

   / Grease zerk question (b2620 w/ QA from b3200) #1  

DieselDon

Member
Joined
May 30, 2011
Messages
42
Tractor
B2620
I have a new b2620 with the quick attach (FEL) from the b3200. It's amazing. There are supposed to be 6 grease points per side on the FEL, but there are only 4 zerks per side due to the QA.

It's obvious (black grease collecting dirt) that the QA has two grease needs on rotating pins, but those pins are attached by bolts. How does one get the grease inside the pivoting area?

Thanks
 
   / Grease zerk question (b2620 w/ QA from b3200) #2  
You have the wrong pins in the quick attach bracket. You reuse the greaseable pins that were in the bucket on the QA. The solid pins that come with the QA are to go in the top hole of your attachments.
 
   / Grease zerk question (b2620 w/ QA from b3200)
  • Thread Starter
#3  
Thanks for the insight. The dealer, during set up, has done a few things wrong but they've more than made up for it.

I'll hunt down the correct pins.

Thanks again
 

Tractor & Equipment Auctions

4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
JOHN DEERE 3040 TRACTOR (A50459)
JOHN DEERE 3040...
2011 IC Corporation PB105 School Bus (A49461)
2011 IC...
2017 Ford F550 4x4 Bucket Truck - 45FT Terex TL40 Boom, Powerstroke Diesel, Utility Bed, 54K Miles (A51039)
2017 Ford F550 4x4...
2004 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2004 Big Tex 10PI...
1993 Mono Dump Trailer (A50514)
1993 Mono Dump...
 
Top