Heads up for 47" snowblower users..

[ChuckinNH]

I was at a local Kubota dealership yesterday ( yes, I know...... but I was actually there buying parts for my Simplicity). Anyway, they had a B2920 in the showroom with a snowblower mounted on it. The snowblower was fitted with extension plates to widen the front of the snowblower 2"-3" on each side, and were high enough to act as drift knives. They bolted to the sides of the snowblower with three bolts, and to the lip on the top of the snowblower using a right angle bracket, and a couple of smaller bolts. I don't remember them being part of the stock snowblower package, but they sure looked like they would fit right on to a JD snowblower too, and provide a ready made solution. Hope this helps someone.

 

[Rob-D]

Thanks Chuck. I have a 47 blower from my 2320 but haven't used it on the 2720 yet. I think the rear track is a bit wider but don't know if this will create problems. It worked perfectly with the 2320 and I never needed chains although I do use a rear box that is loaded with concrete.