Help with 3pt tiller tines

brokeasajoke · May 7, 2022

A friend gave me this roto tiller we dug outta the woods. The previous owner used it for a weed eater along a road and beat the tines off of it. Any ideas where I could find something that would work?

K5lwq · May 7, 2022

Might try these people. Know nothing about them but worth a call.

Implement Parts for Farm Pro, NorTrac & Jinma | Circle G Tractor Parts

Get the implement parts that you need for your tractor at Circle G Tractor Parts. We carry thousands of parts for Jinma, Farm Pro, and more. Search now!

www.circlegtractorparts.com

3gunr · May 7, 2022

That looks like a yanmar tiller , Those are S tines you can google them and get them from amazon.

brokeasajoke · May 7, 2022

3gunr said:
That looks like a yanmar tiller , Those are S tines you can google them and get them from amazon.

I seen some that looked like they might work but wasn't sure. Seems they may be for walk behinds. S tines look like something completely different.

JJT · May 8, 2022

If you have one good tine, you should be able to find a match. If not, you can get a set made up if you can find the right machinist. My neighbor had another neighbor make up a set of tines for less than the cost of an OEM set.

brokeasajoke · May 8, 2022

JJT said:
If you have one good tine, you should be able to find a match. If not, you can get a set made up if you can find the right machinist. My neighbor had another neighbor make up a set of tines for less than the cost of an OEM set.

I have several good I'm just striking out on finding any. These go down in a slot and a bolt goes through where most seem to bolt on.

brokeasajoke · May 8, 2022

Looks like yanmar might work but slightly different profile and Kubota grey market look to be the closest profile. Definitely the 10mm hole and not the 12.