Grading Land Price GS1572 or GS2596 Grading Scraper?

[beppington]

K, wish they would have mentioned that when I ordered it. I paid $1,400 for it without them, so kind of frustrating.

Chris

Does it have slots where you can just buy the teeth themselves & pop 'em in?

If not, maybe you can return it/ swap it.

 

[ravencr]

Yeah, it's got the slots...just need to the teeth. We're using our box blade teeth right now, but they don't barely go down far enough.

Chris

 

[MtnViewRanch]

Yeah, it's got the slots...just need to the teeth. We're using our box blade teeth right now, but they don't barely go down far enough.

Chris

This is good, now all you need to do is get some shanks with teeth and you'll be good to go.

 

[MtnViewRanch]

I was saying my Land Pride hard copy catalog doesn't, but that it may have changed since 2010.

However ... I need to amend again: I turned the page to the box blade/ grading scraper specifications charts page, & it says "Scarifier Shank Construction (optional)" for all 5 of their grading scraper models.

Probably a good chance that at first LP just included them, but then needed to raise the price and to do that, they made the rippers optional, but the actual purchase price didn't go down when the rippers became optional. Sort of how thing go these days, pay more for less.

 

[beppington]

Yeah, it's got the slots...just need to the teeth. We're using our box blade teeth right now, but they don't barely go down far enough.

Chris

This is good, now all you need to do is get some shanks with teeth and you'll be good to go.

:thumbsup:

 

[murphy1244]

I paid 1332.00 with the teeth.

 

[MtnViewRanch]

I paid 1332.00 with the teeth.

Well, I'm glad that it wasn't $1332 for a set of teeth. I don't know why, but the first thing that came to mind was dentures. :confused2: :laughing:

 

[crazyal]

Has anyone looked at the Woods GS72 side by side with the Land pride GS1572? It looks like the Woods comes with the rippers, not optional and is slightly heavier. I did a search here and only found one thread but not much details.

 

[ravencr]

Well, today we graded all our roads with the GS1572 and my box blade rippers, and it did fantastic. I'm glad I didn't get the larger one, but I do wish it was heavier, especially on our super hard packed gravel. But, compared to the box blade, this thing is a dream. We made the passenger side lower to take the humps out of the road, then leveled it back up and made a few more passes, it it made for a perfectly graded road. I use 4wd, because when it loads up, it would just spin the rear tires. Overall, very happy with the purchase other than not having the rippers. I might even weld some 1/2" plate on it for more weight.

Chris

 

[MtnViewRanch]

Pretty much like everyone else that has one of these graders, HAPPY CAMPERS. :cool2:

 

[beppington]

Well, today we graded all our roads with the GS1572 and my box blade rippers, and it did fantastic. I'm glad I didn't get the larger one, but I do wish it was heavier, especially on our super hard packed gravel. But, compared to the box blade, this thing is a dream. We made the passenger side lower to take the humps out of the road, then leveled it back up and made a few more passes, it it made for a perfectly graded road. I use 4wd, because when it loads up, it would just spin the rear tires. Overall, very happy with the purchase other than not having the rippers. I might even weld some 1/2" plate on it for more weight.

Chris

This weekend I'll be using mine on a hard packed limerock road ... first time trying it on such ... & I have the weights from my old weight set ready to be added if necessary: Two 45 pounders, two 35 pounders & two 25 pounders = 210. If I need them, I'll be interested to see if I can even pull it! It'll be just over 800 lbs at that point.

 

[beppington]

I just weighed the shanks. I'm weird like that

1 shank + pin + pin = 11.4 lbs.

So five sets of them weigh a total 57 lbs.

 

[LT1Pat]

I'm about to buy a GS1572 but I wanted to make sure 72" is going to be the right size. The wheels are 66" apart so I wanted to avoid a 60" but it sounds like these can be pretty hard to pull. The tractor weighs 4800lb without the backhoe. Do you guys think it will be a good fit? I have yet to take off the backhoe but even my L245DT was able to handle a 6' box blade pretty good so I think I might be alright.

 

[MtnViewRanch]

I'm about to buy a GS1572 but I wanted to make sure 72" is going to be the right size. The wheels are 66" apart so I wanted to avoid a 60" but it sounds like these can be pretty hard to pull. The tractor weighs 4800lb without the backhoe. Do you guys think it will be a good fit? I have yet to take off the backhoe but even my L245DT was able to handle a 6' box blade pretty good so I think I might be alright.

You will be fine with the 72" unit.

 

[crazyal]

I think the rippers/ shanks are now optional on the Land Pride GS15xx.

 

[LT1Pat]

Just picked up a used GS1572 for $750 but I had to drive 4 hours to get it. It looks to be in good condition.

I need a pole barn bad!

 

[tmc2318]

I had to make the same decision last fall - ended up with a Woods GS72C for my L3540 for $1200 Cdn. Overall best weight/design/cost ratio in my opinion. Could use something larger if you are only scrapping the surface on finished road but to do any meaning full cutting it will load up with dirt and use up my 35 HP in a hurry. I was surprised what a good job it does leveling when used in reverse. Does put a lot of torque of the 3-point hitch when turning though so need to be careful