MF1540 or MF431

[stump54]

Ok, lets try this. The picture is proving to be as elusive as the tractor.
They thought they had the leak fixed. Actually it bothers me that a new tractor leaks to start with...

http://www.tractorbynet.com/photos/showgallery.php/cat/500/ppuser/26760

 

[MrSteve]

Ok that pic is better, the smaller pic just looked as if the bucket was on the other way.

Yes I would very bothered that you had a leak on a new trator.

By the way... What do you have going on in that other picture?

 

[stump54]

Second pic shows House, Barn, Paddocks, and the '48 Ferguson...

 

[stump54]

It's finally here!

http://www.tractorbynet.com/photos/showphoto.php/photo/3074/sort/1/cat/500/page/1

http://www.tractorbynet.com/photos/showphoto.php/photo/3075/size/big/sort/1/cat/500

 

[MrSteve]

Very nice!

Just wondering, did you ask to have your rear wheels set out that wide? Again just asking nothing wrong with it, it will had about 4"+ to the rear track.

 

[stump54]

It came that way, but actually I didn't know there was an option? What are the pro's and con's?

 

[mark4Jesus]

Nice ride! Are you going to have a pull contest between the two tractors?

 

[MrSteve]

</font><font color="blueclass=small">( It came that way, but actually I didn't know there was an option? What are the pro's and con's? )</font>

I'm not really the person to ask. I can think of one con and one pro.

Con... Tractor is wider, maybe will not fit where it would of before.

Pro... Wider is better to "help" stop roll over (lessen the chance).

Take a look at my pics and see if you see where it would be better to have the wheels set "in" or to keep it the way you have it. My tractor is at its inner most setting.

 

[donais]

my manual said there are four positions the wheels can be set at. i think they setup mine at the widest one also.

 

[stump54]

I can't help wonder which one will be standing in another 58 years...