PowerTrac Specific Modifications

   / PowerTrac Specific Modifications #41  
I have a flail mower (mott mower) I will be posting for sale it was for my 422.
 
   / PowerTrac Specific Modifications #42  
I am interested in the mower, can I have your number or PM me with the details or your number.
 
   / PowerTrac Specific Modifications #43  
Here's the 3pt chipper modified for the power trac 1850. Takes about 30 minutes to return to 3pt tractor power if needed. But on/off like any other hydraulic attachment otherwise.

0830191622_HDR.jpg0830191620_HDR.jpg0830191620.jpg
 
   / PowerTrac Specific Modifications #44  
Very cool, along with your other work in the background. I think Power Trac should offer a 3pt hitch adapter. Most PT owners would buy one and although it may cut into their implement sales, they may sell more tractors.
 
   / PowerTrac Specific Modifications #45  
Thanks!

The 1850 is used to help clear for trail, maintain fire and field breaks and manage understory. So this chipper , the modded HD flail cutter, a 34" grapple travel together.

This fall it will be paired with the PT 4xx w front hoe, stump grinder, and rear hose reel pole saw, brush saw setup.
 
   / PowerTrac Specific Modifications #46  
I have a Befco drum chipper with a optional flail for twigs. Unless I need chips I would rather use the grapple and pile it in a dump.
 
   / PowerTrac Specific Modifications
  • Thread Starter
#47  
Very cool, along with your other work in the background. I think Power Trac should offer a 3pt hitch adapter. Most PT owners would buy one and although it may cut into their implement sales, they may sell more tractors.

Not me! :laughing: If I never see another 3pt implement I'll be happy. ;)
 
   / PowerTrac Specific Modifications #48  
Not me! :laughing: If I never see another 3pt implement I'll be happy. ;)

Your hatred for 3 point implements is somewhat unfounded. Some jobs are flat out done better from the back and the ability to use 2 implements at once opens up a lot of options. Plus it’s a lot cheaper that way. With a good 3 point hitch it can be swapped in just a couple minutes.
 
   / PowerTrac Specific Modifications #49  
I wouldn't say it was a hatred, but experience in using 3 point hitch. I don't dispute, that some implements would work better being pulled, rather then pushed.
 
   / PowerTrac Specific Modifications #50  
Well I hate hooking up a heavy 3pt implement that you can't manhandle around, especially if the tractor doesn't have telescopic lower arms. I always seemed to be out back, no tools, kicking with boot trying to get that arm to slid on the pin, then there is all the adjustments! It is nice with the Power trac, it seems they make it sloppy enough that it goes right on even if not level. The hardest part is the hyd hoses.
 

Tractor & Equipment Auctions

2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
2015 Ford F250 4x4 Liftgate Service Truck (A48081)
2015 Ford F250 4x4...
2017 Claas Jaguar 860 Forage Harvester (A50397)
2017 Claas Jaguar...
Lull 644B-42 Highlander 6,000lbs 4x4 Rough Terrain Telehandler (A49346)
Lull 644B-42...
2021 Kubota SVL97-2HFC Compact Track Loader (A50657)
2021 Kubota...
200 Gallons of Fabric Softener (A48837)
200 Gallons of...
 
Top