Share Pics of People Hauling or Towing Something Wrong
- Thread starter 94BULLITT
- Start date
- Views: 5136628
Renze
Super Member
The mustang EV we get here in Europe, reminds me more of "my little pony" with its high roof and rounded line. It looks nothing like a sports car
Renze
Super Member
Compare the 3rd and 4th generation of the Mitsubishi Delica (or L300 as it was called here)
Mitsubishi Delica - Wikipedia
Toyota HiAce was similar, you sat in front of the front axle, on top of the wheel well. The Japanese had to extend the wheelbase of their vans at the turn of the century, because they had to keep up with the European brands...
Mercedes stopped the legendary Bremer Transporter (Africa is still full of those) in 1995 and tried to sell the MB100 for a few months before the Vito came out in 1996, they purchased a Spanish factory that built a van under license from DKW but with a Mercedes engine.
Mercedes-Benz MB100 - Wikipedia
Customers hated the Spanish build quality, and they couldnt get used to the ride quality which was much worse than the MB design from the 70s that they discontinued. Between discontinuation of the TN or Bremer Transporter, and introduction of the Vito, they did manage to piss off some customers who they sent 20 years back in time by selling them an MB100 from Spain...
Mercedes-Benz TN - Wikipedia
The final successor of both the 207/208/210D Bremer, and the short lived attempt of selling the MB100 in Northern Europe, was the Vito in 1996, named after its production town of Vittorrio, Spain. You guys know it as the Metris.
Mercedes-Benz Vito - Wikipedia
John0829
Veteran Member
I did not think so either, except for the HD and C&C trucks. I know my 92' K3500 has torsion bar suspension which is what they went to when they came out with the IFS and it needs a 40 acre field to turn in while the double cab Tundra will turn circles inside of it.
Too many Kubotas
Veteran Member
Alright, here's the '91 I had, complete with a Dana 60 front axle. And yes, leaf springs.
LHF2019
Platinum Member
- Joined
- Aug 25, 2021
- Messages
- 929
- Location
- NWPA
- Tractor
- IH1586, JD2350, JD2355, JD2950, JD4040, JD4430, TD95D
Ride quality in the Chevy kind of sucks depending on the road. Throw a trailer on it with with weight and now you have a nice ride. Tends to be bouncy as you go down the road. If I have a full tank of diesel(110 gal.) ride smooth's as well.
WinterDeere
Super Star Member
- Joined
- Sep 6, 2011
- Messages
- 12,889
- Location
- Philadelphia
- Tractor
- John Deere 3033R, 855 MFWD, 757 ZTrak; IH Cub Cadet 123
Damn. 110 gal in a pickup truck? Do you go grab lunch while that thing is filling?
My pickup is 36 gallons, and when I'm near empty, even that feels like a long wait on a cold windy night. I will usually have a jacket in the back seat, but don't usually like to wear one while driving, and so I'm often the guy jogging in place next to the pump, trying to stay warm.
dodge man
Super Star Member
I’m betting the 110 gallons is a tank in the bed.
Last edited:
Too many Kubotas
Veteran Member
I have a 120 gallon capacity, but no time for eating when filling up.Damn. 110 gal in a pickup truck? Do you go grab lunch while that thing is filling?
The optional tiny 22 gallon one obviously fills up quickly, then the regular 52 gallon rear tank takes a while, as does the auxiliary 46 gallon tank.
But between moving the nozzle from tank to tank, and often having the swipe the card at least twice, I'm lucky if I get the windshield cleaned off in the process.
ning
Elite Member
My truck has two tiny tanks - 18 & 19, which usually get 14 or 15 each on a fillup. I usually start one tank, then go behind the pump and swipe that side and use its nozzle on my other tank and fill both simultaneously.
I'm guessing your big tanks are constructed to allow filling from a big rig nozzle, aren't those like 40+ gpm?
Too many Kubotas
Veteran Member
Normally that would work, but the dummy that installed my bed didn't run the filler necks up to the side of the bed. Instead they're under the bedside and at a much shallower angle.
This way they're out of sight and well protected, but the downside is that even the flow of a regular pump can be a bit much for them.
The auxiliary on the bed with its straight-up neck is no problem, but I don't want to hold up truckers and generally use the car pumps anyway. Which can be interesting with 38' and 43' long trailers.
ning
Elite Member
My front filler is like that, I have to hand-hold the nozzle at just right of an angle to get it to flow max and sometimes I have to slow down if it's really foamy diesel.
Dftodd
Super Star Member
- Joined
- Oct 19, 2014
- Messages
- 10,522
- Location
- vilonia, arkansas
- Tractor
- Massey Ferguson 1825E, Kubota Z121S
Hit the semi side of the truck stop if it's not loaded with semis. I pumped 100 gallons in about 5 minutes into a fuel cube the other day.Damn. 110 gal in a pickup truck? Do you go grab lunch while that thing is filling?
My pickup is 36 gallons, and when I'm near empty, even that feels like a long wait on a cold windy night. I will usually have a jacket in the back seat, but don't usually like to wear one while driving, and so I'm often the guy jogging in place next to the pump, trying to stay warm.
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 19,039
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
Damn. 110 gal in a pickup truck? Do you go grab lunch while that thing is filling?
My pickup is 36 gallons, and when I'm near empty, even that feels like a long wait on a cold windy night. I will usually have a jacket in the back seat, but don't usually like to wear one while driving, and so I'm often the guy jogging in place next to the pump, trying to stay warm.
I go to the truck pumps when I want to pump any volume. Those pumps get with it.
WinterDeere
Super Star Member
- Joined
- Sep 6, 2011
- Messages
- 12,889
- Location
- Philadelphia
- Tractor
- John Deere 3033R, 855 MFWD, 757 ZTrak; IH Cub Cadet 123
I suspect my Ram would trip the pump if it were any faster than the car aisles. Heck, sometimes it trips those, until I withdraw the handle about 1/2" before locking the lever.
I suspect remote control by the guy standing in back. I see no sign of a driver. The ledge driven over was hidden from far behind, but not from someone in the operator's seat.
Bruce
Found it.
Bruce
Last edited:
gstrom99
Elite Member
- Joined
- Nov 4, 2015
- Messages
- 2,623
- Location
- Greene, Iowa
- Tractor
- Deere 855, Deere 530R zero turn, Allis Chalmers D17 III, Polaris Ranger, Deere 3032E (SIL's), Yamaha Timberwolf 250, Husky saws, H & H 10k and Carry-On trailers
I went to an ag focused fuel station, since it was closest, needing to fill my 5 gal diesel jug. Dang! made a mess, 'cuz it flowed so fast.
Learned my lesson!
WinterDeere
Super Star Member
- Joined
- Sep 6, 2011
- Messages
- 12,889
- Location
- Philadelphia
- Tractor
- John Deere 3033R, 855 MFWD, 757 ZTrak; IH Cub Cadet 123
I'm not a heavy equipment operator, but from what I've seen, it appears steel tracks have no sideways traction... right? If they have any lugs at all, they're usually straight across the tread, at least those I see around here.
John0829
Veteran Member
You are correct, I have operated dozers on high wall ledges and it has a pucker factor like no other.
