Tractor pictures

[deere4320]

My new baby right as we picked her up from the dealer........

 

[RoyJackson]

My new baby right as we picked her up from the dealer........

Sweet looking machine there!!

You'll want to swap those rear tires (side to side) if you want to put chains on them.

 

[ditchseeder]

Here's a few quick photos of some of my toys...

 

[bullbreaker]

My L3400DT BOTA,JD GT235. (rops down on Bota heading for storage ya's did'n nab me .)
Boone

 

[bferris01]

View attachment 169137

View attachment 169138

View attachment 169139

View attachment 169140

Day I brought it home!!!! 5-2010

 

[rjkobbeman]

Drove her home from the dealer on 6/18/2010. Specs:

M8540HD12-1 with R4 tires, 2 rear remotes (SCD & FCD), down exhaust and rear work light
LA1353 FEL with QA 72" bucket, self leveling valve and 3rd function valve
QAPallet Forks
Ballast Box
Land Pride RCR2672 Rotary Cutter
Land Pride GS2596 Grading Scraper
Land Pride QH20 Quick Hitch

 

[jayste]

Drove her home from the dealer on 6/18/2010. Specs:

M8540HD12-1 with R4 tires, 2 rear remotes (SCD & FCD), down exhaust and rear work light
LA1353 FEL with QA 72" bucket, self leveling valve and 3rd function valve
QAPallet Forks
Ballast Box
Land Pride RCR2672 Rotary Cutter
Land Pride GS2596 Grading Scraper
Land Pride QH20 Quick Hitch

View attachment 169145

View attachment 169149

View attachment 169150

View attachment 169151

Nice! I'm kind of partial to orange!:thumbsup:

 

[MikeA57]

Just found this site and wanted to introduce myself and show off my NTM tractor. It's a Ford 1510 that I got this spring and it came with a 5' finish mower and a 5' bushhog. My wife, my 12 yr. old son and I are all enjoying using it to cut our 3.2 acres. I got it because half of my property is a field with heavy grass, especially after it rains and I can't get out there to cut it until the low part dries out. By then it can be 18"-24" high in some places. These pics were taken just as we got it home before taking it off the trailer.

 

[TripleR]

Grand L5030

 

[jayste]

Just found this site and wanted to introduce myself and show off my NTM tractor. It's a Ford 1510 that I got this spring and it came with a 5' finish mower and a 5' bushhog. My wife, my 12 yr. old son and I are all enjoying using it to cut our 3.2 acres. I got it because half of my property is a field with heavy grass, especially after it rains and I can't get out there to cut it until the low part dries out. By then it can be 18"-24" high in some places. These pics were taken just as we got it home before taking it off the trailer.

Welcome, Mike! Nice looking Ford and finish mower. Enjoy the posting and tractoring!:thumbsup:

 

[pitt_md]

Drove her home from the dealer on 6/18/2010. Specs:

M8540HD12-1 with R4 tires, 2 rear remotes (SCD & FCD), down exhaust and rear work light
LA1353 FEL with QA 72" bucket, self leveling valve and 3rd function valve
QAPallet Forks
Ballast Box
Land Pride RCR2672 Rotary Cutter
Land Pride GS2596 Grading Scraper
Land Pride QH20 Quick Hitch

View attachment 169145

View attachment 169149

View attachment 169150

View attachment 169151

That is a BITCHEN machine!

 

[deere4320]

Sweet looking machine there!!

You'll want to swap those rear tires (side to side) if you want to put chains on them.

Why is that?

 

[dcyrilc]

Why is that?

I'm guessing that there's a clearance issue between the tire and fender if you don't.

 

[RoyJackson]

I'm guessing that there's a clearance issue between the tire and fender if you don't.

Yep, that's it...

Just got my chains. Tirechains.com said you want about 2.5" clearance. That's about 3 finger's width. Looking at the third pic (from the rear), I'd say you don't have near 2.5".
Had to turn mine around. Turfs can be turned around since they're bidirectional...ags and industrials (like you have) are unidirectional so they have to be swapped side to side.

Those tires are heavy (especially if they're filled), so have help!

 

[jenkinsph]

rj,
Very nice looking tractor, really like the rear set up too.:thumbsup:

 

[TripleR]

That is a BITCHEN machine!

I am thinking about replacing my Case with that model with a cab; nice tractor. Having trouble deciding on the bucket size among other things.

I have a cutter just like yours, nice.

 

[rjkobbeman]

That is a BITCHEN machine!

Thanks for the kind words. I spent a LONG time deciding exactly what I wanted. I have about 25 hours on it now. Been taking locust trees out of my pasture and am very happy I went with a bigger-than-originally-planned tractor. HP wise, I have plenty. Those R4s don't grab enought to tax the engine, however the physical size and FEL abilities is giving me what I need. Man I love this thing!

 

[Jd1a]

Here's mine:



The old girl is a 1928D. All run

 

[John Henry]

this is my dream tractor

 

[deere4320]

Drove her home from the dealer on 6/18/2010. Specs:

M8540HD12-1 with R4 tires, 2 rear remotes (SCD & FCD), down exhaust and rear work light
LA1353 FEL with QA 72" bucket, self leveling valve and 3rd function valve
QAPallet Forks
Ballast Box
Land Pride RCR2672 Rotary Cutter
Land Pride GS2596 Grading Scraper
Land Pride QH20 Quick Hitch

View attachment 169145

View attachment 169149

View attachment 169150

View attachment 169151

Thats a sweet looking tractor you got there:thumbsup: Just out of curiosity What size tires are those R4's? Is that the standard on the M8540?