Can anyone help me find a grill????

   / Can anyone help me find a grill???? #41  
Been a Weber fan for years. Cooked on charcoal Weber for years and last year bought a nice propane Weber on sale at Wally World. I need nothing else and their products are great. I do have a nice Pellet Smoker also.
 
   / Can anyone help me find a grill???? #44  
Just a local observation, a lot of people with flashy BBQ's and kitchens are probably not the worlds greatest cooks, I have seen some wonderful creations done on a one burner portable and conversely some absolutely unpalatable rubbish prepared in a $100,000.00 kitchen.
The big SS units look nice but I hate the thought of the huge clean up, our stuff is often home to spiders and the dust is horrendous, I don't mind cleaning but not an acre of SS thankyou.
 
   / Can anyone help me find a grill???? #45  
Speaking of flashy----
Back when I was poor, LOL, I had a local shop weld 6 inch legs onto some HD expanded metal mesh, about a 12 x 20 section,
This gadget was installed on top of a large flat rock and I'd fire up chunks of cedar and when it was down to coals I'd plunk the burgers or steaks.
Man that made the juiciest tastiest meals, and as is was in cool down mode I'd add the buns for bergers,
Well those days are far behind and it I now use a gas unit made in Australia and cooks about 4 of 7 meals a week.
One side is conventional with the other a cast iron plate that is great for frying eggs and griddle cakes etc.
That thing set me back about $500, on sale end of season but it simply trucks on faithfully.

Last fall we added a smoker unit to our 'outdoor kitchen', now if all that snow can melt we might be able to smoke some meals.

On the subject of BBQ's, be very careful of what brushes U use for clean up.
If using a wire brush, be sure it is brass or stainless bristles as plain (cheap) steel ones rust, break off and get imbedded in your food and consequently can send U to emergency.
Brass is flexible and not brittle hence much safer,
When I buy a brush I bring a magnet to confirm brass vs steel.

OH, for spring and some BBQing weather!
 
   / Can anyone help me find a grill???? #46  
Speaking of flashy----
Back when I was poor, LOL, I had a local shop weld 6 inch legs onto some HD expanded metal mesh, about a 12 x 20 section,
This gadget was installed on top of a large flat rock and I'd fire up chunks of cedar and when it was down to coals I'd plunk the burgers or steaks.
Man that made the juiciest tastiest meals, and as is was in cool down mode I'd add the buns for bergers,
Well those days are far behind and it I now use a gas unit made in Australia and cooks about 4 of 7 meals a week.
One side is conventional with the other a cast iron plate that is great for frying eggs and griddle cakes etc.
That thing set me back about $500, on sale end of season but it simply trucks on faithfully.

Last fall we added a smoker unit to our 'outdoor kitchen', now if all that snow can melt we might be able to smoke some meals.

On the subject of BBQ's, be very careful of what brushes U use for clean up.
If using a wire brush, be sure it is brass or stainless bristles as plain (cheap) steel ones rust, break off and get imbedded in your food and consequently can send U to emergency.
Brass is flexible and not brittle hence much safer,
When I buy a brush I bring a magnet to confirm brass vs steel.

OH, for spring and some BBQing weather!

Not a problem here in Florida!
Nice day here every day....until late April.
After that...I am gone!
 

Tractor & Equipment Auctions

John Deere Bale Spear (A50515)
John Deere Bale...
PREVIEW DATES AND TIMES (A51572)
PREVIEW DATES AND...
Rhino FS15 Flex-Wing Rotary Cutter - 15 Ft Heavy-Duty Brush Hog for Pasture and Roadside Mowing (A52128)
Rhino FS15...
2015 Ford Escape SUV (A50324)
2015 Ford Escape...
1984 NAVISTAR 1954 CABLE HOIST (A51222)
1984 NAVISTAR 1954...
2008 John Deere 2305 Tractor (A50514)
2008 John Deere...
 
Top