Search results

can the rim and wheel plate be in any orientation to get the width you want? I have a 4720H and the 3 point stabilizer bars are too close to the tires since i installed the pat's system to run my tire chains. it appears that I can put the hoop on the rim on the outside instead of the inside of...

looking to spend around 15k, will be splitting with a neighbor ( yes I know, Danger Will Robinson!) but I know he takes care of his equipment and so do I. any leads? anything to watch out for? I see a lot of case 580s, some 560s. smaller is good and a mini ex would be maybe more useful but price...

I have a line that crosses from near the HST pedals back to the left side under the transmission case. It looks like the cover for the front drive shaft rotates a bit and has worn the line down to the metal braid and its leaking a tiny bit. i could not find it in the parts diagram. anyone...

my McKee econoplow snow blower needs some love. the chain tensioning is done via a flat belt pully and a bolt in a slot for adjustment, very simple and very worn out. should I find another flat belt pulley or replace with an idler sprocket? any advantage or disadvantage to either one? its a...

I can not seem to find how to check the level of the oil in the front axle of my 4720h. I see the fill plug on the right side hub, but no stick or level check bolt?? my hubs leak a little bit and i want to make sure I keep it topped off. also, it says 80/90 on the fill plug, but the manual...

Anyone else going to the Colorado Farm show next week in Greely? we are headed up on Thursday for Sheep and sustainability day. Should be fun to check out all the new stuff and learn a thing or 2.

any one research this company? https://www.ngollc.com/products/021-05-komatsu-pc28uu i see them advertising Japanese imported and refurbished machines for around 20k, some with some neat features. we are interested in getting something for the next couple years as we make a lot of...

we want to build a workshop. I am thinking about 60 x 40. want a steel building for good bay height in the center, but keeping it lower overall to lower its visual impact on the property. It will be placed a few hundred feet in front of our home on a narrow, long 5 acre plot. we will store a...

Going to upgrade the work light to the HF led flood, need to either add a switch or change it to turn on and off with the head lights. also, thinking of installing LED headlight bulbs and flasher/running light, brake light bulbs. have you done this, has it worked out with the flashers? any...

looking at getting a cell signal repeater with an outdoor antenna. we have good service if you can stick your arm 20 feet up in the air, or walk up the hill, but not at ground level. we are on Verizon but multiple bands would be best, as we have family on at&t. any suggestions? we do use...

I put a deposit down on a 2012 4720H / QA loader and 6 implements including 5 ft frontier brush mower, econo-plow 3 pt snow blower, bison 7ft blade, earth worx grader, auger and forks. I think I got a decent deal at 24500 in todays market, and its only about a mile from here as the crow flies...

case 75c cab with flail, log splitter, 2 remotes, loader with bucket and rock bucket, 3rd function. 490 hrs 40k. anything bad about these? seems like a pretty decent deal. its a bit more tractor than i need, but after seeing 30hp cab tractors with just a loader and one remote and one bucket...

Triple bagger Plow Snow blower 46 in deck Cub cadet Dump cart The full package and one of the best built garden tractors of the last 20 years. Shaft drive cast iron hydrostatic transmission, horizontal shaft 16 hp Briggs engine. Real horsepower, not like a new model with “25” hp that cant...

picked up 3 6 ft blue spruce, 3 6 foot Austrian pines, 3 boulders, and... a 5 foot brush hog. runs like a new one, looks like the blades have never been sharpened. for $300. around here, that is super cheap. the used ones usually look like they have been backed into a concrete wall repeatedly...

Looking to purchase a generator. we have lost power 2x in the last couple weeks and we are just getting into snow season. We are also considering buying some property in the mountains where the generator could be useful. we have hot water baseboard, and 2 fridges and a deep freeze. all our...

ok. i finally caved and orderd ssqa forks and some ssqa adaptors for my tractor. my understanding is i need to weld on the pin brackets and a tube between the 2 pieces. a few questions though: is there a standard width between the ssqa bottom pins? my bucket and stuff is 4 ft wide. what...

ok crew, time for another seat and cup holder thread. anyone come up with a good insert if i drill a big hole in my fender? looks like plenty of clearance to the tires. could just use some steel pipe and weld it in also. what seat do you like? considering this one. Universal Compact...

anyone have a larger Chinese saw? looking at the holzforma 388 $240 with 28 bar and chain. looking for something to do some chainsaw milling and not spend a ton. also, will a ms261 handle a 24 in bar? or better to go used? anyone have something in that size range for sale i have a 251...

This headlight housing must have been used on other things, looking to replace. Would love to put in a nice 4 in round led light If you know of one that is not a back up light? I think i could use the rubber grommet style. Or a source to replace these? From my allis 5020.

finally wore out my slim grip rigid 4.5 grinder. I really liked the trigger setup and grip on this, but do not see any like it now. thinking about getting a made in Germany metabo. any other recs? seems like in the 100ish dollar price point, you can get about any of them. I am a fairly...

The arms on my 5020 are about 22 inches long. My 3 point is about half way up when I attach an implement. Is there a source for these with some different length options? One adjustable by crank and one not as a set? When up all the way the bottom of my jd80 back blade is only about 8...

Quick and dirty debris rake. Works a charm. Cost me about 3 dollars in bolts and a bit of flux core wire. Made of a window grate I had in the pile, and a stick of 3/8 x 3.5 plate from the stack of stuff in the garage.

I am new to trailering a gear tractor. I have plenty of experience strapping things down and traveling long / rough roads in the outback and in the states with time in the oilfields, but do you put the tractor in neutral or leave it in 1st gear when on the trailer? I did not see an answer in...

My first real tractor. :cool2: Allis Chalmers 5020 AKA Hinomoto e23 or Massy Furguson 210 or Simplicity 9523. mfwd with new rear tires, balasted, original loader, everything works well and well maintained. new alternator, nothing but a few small drips. should be delivered next week after the...

I have a low budget of about 5k. i found a yanmar 1500d 650 hrs per the ad, who actually knows, bush hog loader, back blade and single bottom plow. i also found a kubota l185dt with loader and back blade, engine rebuilt 100 hrs ago, not sure to what extent. i have one acre that is a bit of...

I have an acre and currently run a cub 1641 that i really like. I have a 150 ft. gravel drive, a good amount of trees and a lot of projects as the property was not taken care of for a very long time before we acquired it last spring. I am limiting myself to one machine. Land is nearly flat...

longmont, colorado. my backyard is all mud and I would like to get it planted. i seeded half of it and have to get sprinklers going tonight, it has been wet the past week. eventually some of it will be lawn and a lot will be rocks and other landscaping. I really need something to germanate to...

My county is giving me a hard time and requiring a bunch of BS for moving a shed in to my property over 120 sq feet. the permit will cost as much as the shed! i am now looking at the lower cost but smaller option of a lifetime plastic shed of 8 x 15. anyone have one? i would plan to build a...

Looking at attachment capable trimmers. plan on the hedge trimmer, string trimmer to start, maybe a blower, sweeper, edger in the future. Which system do you have or recommend? I have done a bit of research and have come down to echo pas or shindaiwa multi tool? pricing looks to be very...

Hello. I have gotten some good advise reading here and thought I may be able to contribute as well. I just picket up a very well maintained Cub Cadet 1641 with 46 deck, snow blower, triple bagger and snow blade. We recently moved onto an acre that is a bit out of control from lack of...