Search results

What year? Seat switch, Brake switch, Neutral switch, PTO switch. All can disable the starting. Go here https://www.husqvarna.com/ca-en/support/manuals-downloads/ type in your model # and check out the first download (2018-04). It has a schematic.

Bamboo roots can get as deep a 2'-3' below grade. Backhoe or excavator is the way to go if you don't want it back. The majority of the rhizomes are in the top 12"-18"

Paint won't last. Deck bottoms are painted from the factory. A truck bead-liner spray or under coating may work but the deck will have to be VERY clean for it to stick. The problem with a bead-liner/ undercoating is how thick it goes on, and the finish is rough. Your blades may not have the...

What I did; I needed about a week of good weather(its wet here in the P.N.W.). First step is very hard on a mower and blades. Scalp mow best you can without tearing up the mower to badly. Till one direction, Next day till again at 90 to first, next day till again at a 45. All tilling was done at...

What are labeled as hole and hollow are just that. Nothing has been filled in or plugged. Good info about the old time Taps, Spigots and Faucets can be found here. https://winehistoryproject.org/spigots-and-taps/ Including a great patent scan from an 1890 "faucet" by John Sommer, Jr. From the...

I'd use a wire wheel/ wire cup brush. Wipe clean, prime, and paint.

Definitely not a rear BB. I agree with @bcp its a Snow pusher. The springs allow it roll under if the load gets to heavy. Preventing damage to the pusher and the rig being used to push. Plus if you look close you can see the plastic/composite(? I think Pic is blurry) wear edge on the inside...

Not there for me either. PC using FireFox

Are there any other dash lights on? In my 07 Dodge if any dash error light is "on" the cruise will not work.

It depends on the look you want. Also what the project is/ will be used for. When I stripped, reworked, and repainted my old trailer, I used a Rodda paint 74904(Clear gloss base) " Maintenance paint". It is a brush on self-priming gloss enamel, in the blue color I liked. They can mix the paint...

Couple of Pics.

I have 2 in my front window sill. It IS a spigot. Back in the day it was pounded into wood beer barrels and used to dispense the beverage. Now days, when you go into a tavern you will see a sign that says ### kinds of beer "on tap". The saying came from the old days of "tapping" the spigot into...

I'm late to the thread, but this is what I would do; Remove the carb. Poor some mixed fuel in there. Block off the ports(2 clean rags) and give it a good shaking. The fuel will suspend the wood chips and dust. Unblock the exhaust port and poor the fuel out. Repeat if you think it is needed with...

BTW I have an extinguisher near to hand at all times.

During my making of the caddies, the garage door was open with a fan blowing the fumes to the outside. Once it was set in the mold and cooled the door was closed. Normally I would have done this completely outside, because I am aware of the toxic fumes released by this process. That day the wind...

No damage method I used to add power for my 3rd function was to disconnect battery, then disconnect the Molex I wanted source from. I then removed the pin from the Molex connector I wanted to add the Aux wire into. Usually the pin is just crimped to the end of the wire. I open the crimp, solder...

Great suggestions everyone! Thanks for the input. I think I'm going to try the lag bolt next time I'm at the property and see how it goes. I'll keep you all "posted". 😅

Thanks for the suggestions. Most of the posts I need to replace are broken off at ground level.

I cut brush and did that the first time. Around the entire perimeter of our 5 acres when we bought it many many years ago. It hadn't been surveyed in over 40 years, had almost no markers, and no posts set. It took me close to 6 months working off an on back then. I'm not a young buck by any...

Hey folks, I'm looking for any Tips/ Tricks to remove broken wood fence posts. We have several posts on our 5 acres that have seen better days. Most are broken at ground level. They are 2' in the ground and NOT set in concrete. The ground is topsoil, then clay/river rock, so I would prefer not...

Here is a picture.

Talk to Travis. Sometimes, NOT always, they may happen to have what you want in stock and ready to go. For me it was the shipping company that really delayed my shipment. No fault of EA or Travis! The shipping Co messed up the ship-to and shipped-from addresses and tried to send it back to EA...

I have one that came with the tractor. Its just a flat 1/2" steel plate with a hole and a ball on it. It uses 2 heavy duty "C" clamps to clamp it to the cutting edge. This set up has no problem moving my 18' tandem axle trailer around. Works well even when pushing or pulling up a significant...

TV news report on them. https://www.wbtv.com/2021/03/21/deputies-fraudulent-business-claiming-be-based-out-western-rowan-co/

I did find some info. Maschio Gaspardo is the brand owner. The name "TerrAnovA" is a production plant in Cadoneghe (Padova) acquired by Maschio Gaspardo in 1975. On the SN tag is the Maschio name in graphics. MASCHIO GASPARDO NORTH AMERICA, Inc. is located in Dewitt IA But I still have very...

I bought two 4 drawer file cabinets at a local college surplus sale. 1 is in the garage with all my manuals, receipts, misc parts, etc for things I have purchased. Each in a zip-lock bag. In the same cabinet (separate drawer) are my service manuals. Cabinet #2 is my dresser. LOL It has been...

Another update. 2.5 Acres brush hogged and the saw was along for the ride. Our property is 1/2 trees and 1/2 fields. They are not fairways by any means. More like ski moguls. Very bumpy! The saw stayed in place the whole time and honesty I forgot it was there... There is no sign of cracks around...

I recently obtained a 1993~94 Kubota B2150(24 HP) that was very well maintained and had very low hours(-900). It came will all the attachments you mentioned (less the auger & mower deck). We have 5 acres I maintain with it, along with my Mom's 5 acres. I brush hog 2.5 acres on our property which...

Thanks everyone! The process took several days, but I'm happy with the results so far. Luck be with me, I will never need it. I'll be heading up to the property soon to do more branch cleanup. Hopefully, I'll remember to get some Pics while I'm up there...

Since I got my grapple I've had several close calls with branches that did not want to play nice. And 1 that remove a piece of the engine surround. So, its grill guard time. I made this from some things I had laying around, All but the expanded steel. I cut and bent the pipe then welded the...

Have you checked out Upstate Brush Control on you-tube? They use a 4500 in a lot of their Vids. Maybe they would be interested in another one.

We had oak floors in our house. They were "sanded" to refinish them very poorly, before we bought the house. So I ripped them all up and installed a new bamboo floor. Now to the point. There were several boards that were still in decent shape that I figured would be good for some projects. But...

My wife was adamant I not use "her" oven to heat the pipe! lol Sorry I did not get Pictures of it while I was there doing the work. I got into "work mode" and that was that. Next is a caddy for the fuel and misc other chainsaw tool/parts. Not sure if PVC pipe will work for that application, but...

First test, success. Today I ran the tractor cleaning up branches and I also did a little brush hog work. The saw stayed exactly where I put it while I was going into, thru, and out of brush/ small trees, and as branches flexed around the ROPS then slapped the caddy. No signs of wear or stress...

Muhammad's pic on page 3 is 2.84 MB and it was resized to 1,184px × 2,500px. And Xfaxman's pic on page 5 is 3.33 MB and it was resized to 2,500px × 1,875px That is a lot of data to download on just 2 pictures. Especially if your on limited data or slow internet. I agree. It's not a real issue...

Phones are next to impossible to get a Pic down sized on, before you upload it. I have to download mine to the PC, then "re-size" them using Office 2010 Picture manager. Most of mine are 640x480pxl (120kb) down from 3984X2988 (4MB). Even with unlimited data, the BIG pxl images take a long time...

Bamboo is a grass. BIG but still a grass. Cutting it will not kill it or limit the spread. Some bamboo's have roots up to 2' deep. Digging it out is the only way to be rid of it. (My father-in-law did just that some 30 years ago by hand.) Short of some heavy chemicals, that's the only way. If...

Earlier the Pics were having a hard time displaying on the site. Not sure why, but seem OK now. Also, if you click on the Pics they get a bit larger. My thinking also. I still have a bunch of pipe left so when this one breaks, I will add strapping to the next one. Bending PVC; Heat sand in an...

Can anyone tell me any info about this tiller? It was made in Italy. But that is all I know about it.

HDPE is not as hard, is it more resistant to chips. I use it for cutting boards because it is easy on the knife edge. PVC is harder, but prone to scratches/chipping, and being harder it's more brittle. EDIT: There are also different PVC compounds. Some are softer then others. IE; PVC conduit Vs...

Not sure I would want to get the first Pizza the next day! 🤢 I'm glad I decided not to go that route then. 👍 I thought about it as possible option. My big concern is the brittleness of the PCV. Especially when it is cold out. I'll be sure to keep you all posted as things progress.

I can't say how hot it actually was. With my Dewalt heatgun set to high heat and low airflow, I heated for 2 minutes, then I turned it over inside the pipe, heat for 2 min, turn, 1 min, turn, 1 min. At this point the PVC was slouching inside the "oven". Any more and I was afraid it would...

There are a great bunch of threads and posts on this subject here, but I like to try my own thing. This is my version of a home made chainsaw carrier. It is made from PCV pipe I molded in the shape I wanted. Mounted with all-thread I bent and covered with tubing to prevent vibrations. The start...

I've been trying to figure out the same thing! We are 45 minutes away from our 5 acres. So I have to haul the tractor up and back from there each time we go. If I left it there I'm afraid it would be gone or stripped when we come back. (sad times we live in ☹️). I'm still trying to figure out a...

Thank you. Originally it was for a DLT3000.

You are more then welcome! 55.5 " total length. In the above Pic, that would be front to rear. If you are getting the quick attach version you would not have the Pin-On brackets that add width. But some of it will depend on the actual pallet used for shipping. My truck cap is cab height. Ford...

My EA 55 Wicked root rake grapple came with what they called "standard hoses and fittings". 3/8" hose and 1/2" AG quick couplers. If your grapple is the same, then as long as your fittings will mate up to those, you will be OK. A smaller hose will reduce speed of cylinder movement, not total...

Thank you. The one I made was out of a craftsman walk-behind I got cheap from a local repair shop. I paid scrap price for it. Picked up the parts needed to rebuild the case for a few bucks(shaft seals and bearings), and picked up a second set of tines & shields to make it wider (36"). All in to...

Ya, a pin-on is the odd ball in the park for sure. Travis at EA was kind enough to get detailed measurements for me on packing size. My nearest depot for pick up is an hour away, so I needed to know if it would fit with the cap on. It had plenty of clearance all the way around. My cap is all...

Not sure if anyone is interested in this or not. But thought I would throw this out there. I made this tiller in 2014. At the time I could not find anything like it. We had a decent size garden 40'x50'. It took a lot of time and effort to walk around behind a tiller, so I got creative. It is...

Everyone and every place has rules. My G-ma had a simple rule. "Hats are left by the door." Not that she didn't believe in hats, or questioned someones right to wear a hat, or thought wearing a hat was wrong. She certainly wasn't being counter cultural about hats. It was just one of her rules...

You can try putting your name out to a few "dirt" contractors in your area. There are always some around my area who a looking for places to dump waste dirt from another project. My neighbor did exactly that and received 10 tandem dump truck loads of clean topsoil withing a week from a housing...

Where I'm at, recycle places will also not take fencing unless it is in 2'x2' pieces. No wire rope either, except in 2' pieces. That is why we often find old skidder and choker wire in the woods all the time. I agree with others above; Save a few nicer chunks and then a free sign or list it cheap.

3rd post "Top 30 Posters" link. Yep it's broken due to new format. Top posters, can be found under "members" (top center on the section links-list bar) click it, and then click the "See more..." button under any one to expand it.

They still contain iron for strength so they would be considered semi-magnetic. A lot of "stainless steel" will still rust, depending on the composition.

Is there a way to opt out of push notifications here?

It's still there. If you hover over the Date IE Feb 4, 2021 at the upper left of a post, Month, Day, Year, and Time will pop up. Feb 4, 2021 at 9:43 PM This was my newbie thread date time...

We have a hydraulic wood splitter. One on wheels with the vertical tip up for splitting on the ground. We got that long before the tractor. I'll leave the heavy hand splitting to the young bucks! I try to work smarter, not harder as I get wiser. The tractor was in great shape and well taken care...

It's on a dead end road, only 1 person walking on it at the time, his eyes were huge when he saw me. Fire wood. Seems there's never enough at one time to fill a log truck, so might as well get some heat out of it. 830ish hours on it when I got it last summer. Thank you! That tree was probably...

EA 55" wicked with a LA 402 pin-on was a prefect fit for the B2150 and LA 350(A)! Loving this thing so far! Thank you Travis for helping to make this happen!

Thank you. I've hit the pipe a few times, it's pretty stout. Nope, not foam. That was my first day of using the grapple and wanted to see what it and the little tractor could do. It sure felt like it had some more to give. Even with that big log, I was still able to curl it fully and lift it as...

Do tell? Where is attachment manager? All I can find is Attachment browser and Attachment Reuse.

From what I have found; If you click your user name in the upper right of the forum, then click "Attachments" you only have an option of sorting by date.

I loved our Craftsman 4 stroke mini. No fuel mixing, less smoke and fairly quiet. We mainly used it between rows till I over filled it with motor oil and popped the rings. I forgot it had to be laid handle on the ground when filling it...:cry:

The little tractor that could...

If I understand what you are asking, click your user name in upper right, then click settings in the drop down window.

Explosions during drug making are expensive losses to the maker. They are not part of the process, but a result of an error. The last thing drug makers want is to draw attention to their operation. I agree with @ning assessment, guns, fireworks, or it's possible that someone is trying to blow...

First, how would the regional rep even know you stopped somewhere else unless someone "tattled" on you? Second, do you really want to give your business to someone who acts like that? Third, if the price quote was signed. I believe it is considered a legal document (read the fine print) pending...

I was in the same boat as you are now with my 2150. Summit gave me the same answer as you, "Universal kit". But, I liked the prospect of an all inclusive package. The biggest concern for me was if the forward hoses would reach. After researching other FEL and tractor specs to my setup, I...

I installed a Summit 3rd function and the 55 wicked on my tractor. Love it so far! I will posts Pics of it in action when I get them off the phone.

I want to say a special thanks to Travis @EverythingAttachments for all his help to make this happen! The B2150 is not a big tractor by any means. So adding a grapple to it meant it had to be as little weight possible, but I wanted one with durability too. Adding a Quick attach system with the...

Hello and welcome from SW Washington. We have 5 acres down here. Plus my mom has an additional 5 we help maintain. I recently got an old tractor with low hours, a bunch of attachments, and trailer. I added a 3rd function valve to it. It works great. I'll post more about that when I can. For what...

First I want to say I knew little to nothing about hydraulics when I got this tractor. Back story; We had a wind storm last Dec. and several trees and limbs came down at our property as well as at my Mom's place. I'm not a young buck anymore, and our kids are out of the house now. So how do I...

You guys are great! You nailed it dead on the head. When I got this tractor I looked thru the manual and there are 3 fuses in this tractor. 1 fuseable link and 2 blade fuses. One of the blade fuses is for the glow plugs. It is working. But, when the key is in the preheat (glow plug)position it...

Win 10 is one of the worst offenders IMO. Just read the EULA. You can not disable all their trackers, only minimize some of what they track. And even at the lowest level they still track your hours at the computer, sign-on name and times, IP addresses, MAC addresses, ISP used, OS used, what apps...

1993~94 B2150 HSD 4Wd 835+/- original hours. This just started in the colder months late Sept~ Nov on, but seems to be getting worse. Bran new battery in May 2020. Was starting fine then. Battery terminals are clean and tight. Starter has a good rapid cranking. Will check for glow plug voltage...

I'm new to diesels over all, and now I have 2. My 2150 seems to be harder to start recently. I first noticed it when it was cold out, and figured that was why. But now that it is warm again(40-60°F) it is still starting hard. By hard I mean long crank times. It has a manual glow plug system when...

Thanks Jon. Someone I had worked with numerous times in the past running the tractor among other things. I had borrowed the tractor in the past a few times. I always took good care of the tractor and oohed and aahed over how well it could do things. So when he no longer needed it, he offered it...

Not a bad idea. Something to think about. I was told the original one was lost while brush hogging an open field. The mount bolt kept working loose and it would be found hanging from the wire. Then one day it was just gone. They hogged that field 2-3 times a year and never saw it... The mount...

No, they are just like the original with an incandescent bulb. Because of the age and condition of the tractor, I'm trying to keep it as original as possible.

The LR flasher light was missing from the tractor when I got it. So the search was on for OEM old style light. I looked on Kubota web site for reference #s for the light, but most were "replaced by...". I picked up one of the "replaced by" lights and it was not even close to the original. So the...

My "heavy" tow rig. 1997 Ford F-250 HD 4x4, 7.3L Power stroke. 80,500 miles on the clock. With a 1994, 16' Wilson custom trailer. Use this for the Kubota B2150. This was the day I picked them up. Pic1: I was dropping off the rotary cutter so I could go get the rest of the stuff. Both had been...

Hi all. Glad to be a part of the forum. Tractor; I recently acquired a Kubota B2150 HSD 4Wd tractor with a LA350a FEL and several implements from the original owner who bought it new off the lot. The tractor only has 830ish hours on it. Not much at all considering it is a 1993~94. It was very...