Attaching bucket hooks to a Kubota MX5400 with L2236 bucket

[WranglerX]

I did this as alternative to "hooks" and I had angle iron and bolts already available, just took a bit of fabrication....

 

[masscity]

I bought 5/16" kennyd hooks, so you can use 1/4", 5/16" and 3/8". I have 5 welded on my FEL bucket and 1 each on my

BH bucket and my Ripper tooth. I've never needed a strap on there yet, but I have D-rings on short chains with hooks.

 

[chim]

I bought 5/16" kennyd hooks, so you can use 1/4", 5/16" and 3/8". I have 5 welded on my FEL bucket and 1 each on my

BH bucket and my Ripper tooth. I've never needed a strap on there yet, but I have D-rings on short chains with hooks.

Expecting a flood?

 

[masscity]

Expecting a flood?

One of my three times I changed my tranny fluid.

 

[Mike1955]

WranglerX I really like the set up. I got the steel and the time but not the energy. I just welded a couple of three eights grab hooks. It’s been really handy but not as pretty as yours. Thanks for sharing