mrmikey
Elite Member
Fluid film is good as well, same consistency as Krown, works the same way, penetrates and then the carrier evaporates. Krown is an every year type also.......Mike
recommendations for undercoating/ rustproofing
- Thread starter greif
- Start date
- Views: 5498
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 14,474
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
I had my 2015 RAM Waxoyl'ed it is a wax type undercoating, I had looked at and considered the Krown and Fluid Film products, but the waxoyl sounded like a more durable product.
Had to take it to Vermont to get it done, for some reason no places here do it.
Had to take it to Vermont to get it done, for some reason no places here do it.
Egon
Epic Contributor
I under coated my truck when it was maybe five years old.
Wire brushed sand blasted any rusted spots, sprayed on phosphoric acid, followed by rust coat paint. To finish sprayed on a mixture of kerosene and roofing gunk. Also gets crown coat every fall. Seems to have worked on most areas.
22 years old this month.
Wire brushed sand blasted any rusted spots, sprayed on phosphoric acid, followed by rust coat paint. To finish sprayed on a mixture of kerosene and roofing gunk. Also gets crown coat every fall. Seems to have worked on most areas.
22 years old this month.
Egon
Epic Contributor
I under coated my truck when it was maybe five years old.
Wire brushed sand blasted any rusted spots, sprayed on phosphoric acid, followed by rust coat paint. To finish sprayed on a mixture of kerosene and roofing gunk. Also gets crown coat every fall. Seems to have worked on most areas.
Wire brushed sand blasted any rusted spots, sprayed on phosphoric acid, followed by rust coat paint. To finish sprayed on a mixture of kerosene and roofing gunk. Also gets crown coat every fall. Seems to have worked on most areas.
PILOON
Super Star Member
Raw linseed oil also works.(raw, not boiled as boiled actually contains driers or hardeners)
You warm it up and it sprays like thinned paint but thickens as it cools.
It loves rust and will get soaked in just like a blotter soaks up ink.
(a couple of drops on a rusty steel flat will soon become a large stain)
LOL, the odor goes away after a while.
Aviation used linoil to coat insides of tubular airframe structures for years.
Once on a VW beetle (they were rust magnets) I coated the undersides of the fenders and joints as well as the rockers and that VW resisted rust for as long as I had it.
Made my own tractor cab and coated all the square tubing insides with linseed oil and to date not a sign of rust. (like 12 years or so)
Also painted (slopped) linseed oil under my fenders.
It has the properties needed. Adhesion, flexibility, water repulsion and longevity. (actually the basis for many 'oil based paints' and enamels.)
Many old time painters would add linseed to low quality paints in order to improve the durability and adhesion
You warm it up and it sprays like thinned paint but thickens as it cools.
It loves rust and will get soaked in just like a blotter soaks up ink.
(a couple of drops on a rusty steel flat will soon become a large stain)
LOL, the odor goes away after a while.
Aviation used linoil to coat insides of tubular airframe structures for years.
Once on a VW beetle (they were rust magnets) I coated the undersides of the fenders and joints as well as the rockers and that VW resisted rust for as long as I had it.
Made my own tractor cab and coated all the square tubing insides with linseed oil and to date not a sign of rust. (like 12 years or so)
Also painted (slopped) linseed oil under my fenders.
It has the properties needed. Adhesion, flexibility, water repulsion and longevity. (actually the basis for many 'oil based paints' and enamels.)
Many old time painters would add linseed to low quality paints in order to improve the durability and adhesion
BLSXJ
Gold Member
If your up to doing it yourself... a product like fluid film is great. anything that has the ability to "creap" into cracks is a good thing.
I believe undercoating is more of a quantity over quality product. you need everything coated, so finding a good shop/person to do the work is more importanat then the product being applied.
that said, if the truck is new, Krown is the only company that offers a warranty against rust... but read the fine print!
I believe undercoating is more of a quantity over quality product. you need everything coated, so finding a good shop/person to do the work is more importanat then the product being applied.
that said, if the truck is new, Krown is the only company that offers a warranty against rust... but read the fine print!
RyeThomas
Gold Member
Fluid film and if you want to do it the easy way buy it by the gallon with a spray gun designed for it and put that stuff on everything. I have used it for years, then last year I found a Co online that designed a spray gun for it and all I can say is what took me so long. Much better, easier, consistent application. If I can find the paperwork I will edit this post with the info on the one I purchased.
Peter 315
Super Member
Fluid Film I get the 5 gal bucket it never go's bad . I got the spray kit from this guys Fluid Film PRO Gun kit $89.50 Fluid Film Rust Protection
and if u spray enough of it u get use to the taste
and if u spray enough of it u get use to the taste
Here are some similar links:
