Apr 25, 2010 / Sizing angle iron for ramps #21 Iowachild Veteran Member Joined Feb 16, 2006 Messages 1,025 Location NW PA Tractor Kubota B2320HST My ramps are made out of 1½" X 1½" X 1/8" square tubing. There is number 3 or 4 re-bar welded on the cross pieces for traction. They work well and can easily support anything that should be on the trailer. Attachments trailer2.jpg 10.6 KB · Views: 557
My ramps are made out of 1½" X 1½" X 1/8" square tubing. There is number 3 or 4 re-bar welded on the cross pieces for traction. They work well and can easily support anything that should be on the trailer.
