Hi folks, I haven't posted on here in FOREVER, but I came across a local John Deere 650 that is being sold for parts. Obviously it doesn't run and it is in pretty rough shape. The seller says the...

I have a 1986 John Deere 650 tractor. it is currently stuck in 4x4, the shifting handle just free wheels like its not hooked to anything. the roll pin in the handle is good. Can I pull the...

Looking for front fwd drive shaft

Troubleshooting tips needed. Battery has 12.3 volts. Tractor is not turning starter. I checked cable at starter, it also had 12.3 volts. I tried the starter disconnected from tractor using Battery...

I have a John Deere 650 tractor that I was in the process of cleaning up a rusted injector pump and one of the small pins that hold the rollers in flew across the shop. Does anyone know where I...

At the beginning of the summer, noticing slow lift and dragging of the loader, I drained the fluid, pulled the screen, (which was clean), and refilled the box to the correct level. Things seemed...

Need wiring diagram for 1987 jd 650. Old switch 5 terminals, new switch 6 terminals. How to determine which terminal not used on new switch.

Hello experts! I’ve got a fresh problem and thought I would come back to this honey hole of knowledge. The rockshaft control valve on my John Deere 650 is leaking at the feedback rod. This had...

Hello experts! I’ve got a fresh problem and thought I would come back to this honey hole of knowledge. The rockshaft control valve on my John Deere 650 is leaking at the feedback rod. This had...

Just been quoted over $100 ea. for replacement shoes, does anybody have a cheaper source? Thanks, James

I have JD 650 with OEM 160 deg thermostat and want to replace with 180 deg thermostat. Anyone have part numbers? I’ve searched but no luck. I know this has been before. Thanks to all

Since I bought the tractor, my 1983 John Deere 650 has issues with the hydraulic stop valve. I have tried everything, but I can not get it to turn in either direction. There is some rust on the...

Hello JD 650 owners, Sadly, I lost my 650 (which I'd owned since 1988) and my 740, in a fire a few weeks ago. I really liked the 650, it was a super tractor! There was little to save, as I...

Hi, if anyone has a mid mount mower/belly mower for a 650 that they would like to sell, please let ,me know

Hi all, was wondering if anyone knows if a John Deere Model 51 Loader will fit my 650. Im thinking i can make the loader fit, but im wondering about the valve. Please let me know. Thanks.

Hi, wondering if a model 51 loader from John deere would fit a 650? I can weld, so I could probably make it fit, but I'm more concerned about if the valve would work, or if I would need to get a...

Hi all folks, Looking for new tires for My 1985 John Deere 650. It's MFWD, and the rear tire size is 9.5-16, and front tire size is 6-12. I would like to have a semi turf friendly...

I have a Bushhog qt1846 front end loader on a John Deere 650. I have very little experience with FEL tractors but I can not help but feel like something is not quite right with my setup...

I have a JD 650 and looking to see if there are any aftermarket or Yanmar foldable ROPS that fit the 650.

Hey folks, I'm looking for some good sources of used parts for my John Deere 650 tractor (1981). More specifically, I'm looking for a front left SPINDLE. Any help would be greatly...

Hi all, my 85' John Deere 650 has a metal injection line that is leaking, it is leaking right where the metal line screws onto the injection pump, indicating that the line is bad, but...

Hello All! my little MFWD JD650 is getting meaner and meaner as I continue to rehab it (with quite a bit of help from ya'll). It has recently been relegated to hard labor in the more...

Hi. I've had my JD 650 for a couple years and am in the process of mounting a 3 point WM6600 on it. It is going very well so far. I've read here and elsewhere for years about NOT using a 3 point...

Hi all, wondering the specs of my 1985 John Deere 650. I am planning on putting a 54" Box blade on it, and I need to know if it can handle about 500lbs. The box blade weighs 295lbs, but I figure...

I purchsed a 1985 model. test drove and it was restarted several times. Hauled it home on a trailer and much jiggling neutral switches and it finally cranked and started. unloaded and parked in...

A neighbor has a JD 650 for sell. Aesthetically it looks pretty good but it doesn't run and it's been through a flood. I pulled the dipstick and water squirted out of the hole for a good 3-5...

Hi folks, I'm newly joined, but want to thank you all for the past year of saving me time, grief, money and injury, but mainly money. There is a 2" diameter knob below the seat of my 650...

I have a John Deere 650 compact utility with a front PTO, looking for an armature CH16068 for mine or a used electronic PTO clutch LVA801788, several parts are no longer available and not getting...

My 1986 JD 650 will not reliably start. On the rare occasion it will, it blows thick white smoke for a while, then it appears to run normally and suddenly stops running without explanation. I...

Hello all! I have got a hydraulic issue I need help with and I hope it is an easy one. I am completely new to hydraulics so bare with me... The bucket on my bushhog 1846QT loader, which is...

Hello, I have a John Deere 650. It is a 1986 tractor, engine model # 2T80UJ. The tractor wouldn't start. Nothing. No lights. Discovered the fusible link in the circuit near the starter was cooked...

Hi, I have been trying to locate some brake parts for a JD 650. Several people suggested "Green Tractor" but their login setup is grossly over done, funky and basically does not function. Does...

I was wondering if anybody on here has the torque specs or repair manual for a John Deere 650 with the Yanmar 2t80 2 cylinder. I cant find any info online for the torque specs or the assembly...

Hello! I need some help.... I’ve got John Deere 650 that I purchased and have been bringing back to life to help maintain a new property I just bought. For the lift of me I cannot get the...

Hi, I am getting desperate trying to find 1 or a pair of front wheels. Have contacted 5 or 6 tractor salvage outfits and I either get the run around or calls not returned. If anyone has them or...

I'm doing a quick head gasket repair on an 1981 jd 650. Any suggestions? Does anyone have a PDF of a repair manual?

Hi All. I'm brand new to the forum, and also pretty new to compact tractors. I'm looking at buying a John Deere 650 that is coming with a tiller and 3 pt blade. I'd like to also put a loader on...

Howdy Bought a 1983 JD 650 CUT with a 67 FEL. Only has 500 hours and in overall nice shape. I have a JD 7 backhoe with mounts and a ladder style sub-frame off a JD 755. JD lists a seperate...

Excellent way to put a bit of weight on those rear tires. Under $30 (CND). Used about 10 baseball size rocks from around the yard as filler.

Just recently purchased a 1981 JD650 with an aftermarket loader. Last owner was using all kinds of bolt sizes/lengths. If someone has any information on the mid mounting bolts location/thread...

My tractor has always had a little leak where the open/close shaft goes in to the hydraulic stop valve but recently it's got much worse. Is this rebuildable or an easy fix? Maybe just an O ring?

I am looking to replace the seat belt that was removed from my 650 20 years ago. Deere wants ~$180 for a new assembly but a similar assemblies are available for less than $20. Lap Seat Belt...

Here's my scenario. Several weeks back, I had started up my infrequently used tractor, warmed it up, and run it around the block a couple of times to get the fluids moving and charge up the...

Hi Guys and Girls, I am in need of a front wheel for a JD 650 compact tractor. It is 4wd, 4 lug and tire size 6 x 12. If you have one to sell, please holler, Thanks, James.

I have been working on a 1985 JD 650 compact that had been pretty abused most of it's life. It being a close relative of the Yanmar YM187D most parts will interchange, at least seals & bearings on...

Just the last couple of days the hydraulics on the boom and bucket have become slow and shudder. There is also a noise like something is uinder pressure or strain in the guts. 3pt. is also slow...

OK, here's another question for you JD Gurus. I have a nice old JD 650 with the smaller #60 Loader. Should the 60 be able to lift the front of the tractor? I don't seem to have any down pressure...

This may be a lame question, but I know that one of you for real tractor people will at least send me in the right direction. Is there any kind of chart that will give me an approximation of how...

Here's one for you JD gurus out there. I just bought an '85 650. A nice clean old tractor with all original paint. (no cracked or repainted welds). It does sound like a bucket of bolts while...

I have a John Deere 650 with an electric clutch that operates the front PTO for the belly mower. The clutch seems to be slipping and the part number LVA801788 is no longer available. Is there...

I have a John Deere 650 that the electric clutch that drives the front PTO for the mower is slipping. This part is not available any longer. Does anyone know of a different part number that I can...

jd 650 left on our new farm has 1200 hours got it running and it runs good, the little tractor had been sitting for an unknown amount of time. transmission cap was off and had been rained on...

I just bought a JD 650 4wd with a bush hog and was wanting to put a 60" belly mower on it. I found one that in pretty good shape but I'm missing the 4 brackets that attach to the bottom of the...

OK, got the tractor running yesterday with the new fuel pump installed (think the timing might be off a smidge, but that's another thread). Now trying to reassemble everything and have been...

So, I was able to find new fuel lines for my JD650 at CWP Parts Warehouse. However, the #2 cylinder line (CH17555) actually has a different bend where it goes to the injector and isn't a clean...

So, I received my brand spanking new fuel injection pump. It's so shiny and new with that new pump smell, I almost hate to use it! It may well be the last one in stock anywhere. Came direct...

So, I'm a freak'n idiot (no surprise to my wife) and in my frenzy to get some parts for my tractor the other night, I ordered the same parts from two different places without realizing it. Sigh...

So, I have a dream that I'll actually be comfortable on my little compact tractor. The seat is about 2 inches too far forward for a 6' (non-compact) person and I'd like to mount one on a swivel...

OK, been futzing with this for too long and not getting anywhere. Need advice before I end up hiring someone . Last year when I was using my tractor I had zero issues with it starting. first or...

I am installing a Westendorf loader on my John Deere 650 and cannot get the loader to operate. My tractor had no additional hydraulics - no power steering, no Selective Control Valve. I...

Bought a JD 650 with loader last year. Ive noticed that the loader can lift about 400lbs to about 4 ft. Any additional weight or height leads to a very loud relief valve releasing pressure...

I have a john deere 650 that ran well before someone attempted to hot wire it to steal. Know all it does is click at a relay under the dash..I have traced all the wiring to see if wires where...

Purchased this JD 650 6 months ago. The tractor was working fine. I just used it for pulling a light trailer up a hill from my shoppe and some box blade work. I have no idea how many hours on the...

This tractor has always been murder on rectifiers when using the front electro-magnet clutch. For the past 10 or more years I have had the charge circuit disconnected and use a combination...

So, had to share this story and ask about next steps. I changed all the fluids on my auction bought JD650 (never trust another man's maintenance). Glad I did, it was a mess. The gear oil in the...

Now that I have my brakes torn down, all my parts have arrived, I'm looking forward to a weekend of cleaning and reassembly...finally. A couple of questions. 1.) on the drum shaft, I'm assuming...

So, my JD650 has an aftermarket seat on it that just has 2 angle brackets mounting it to the pivot. Was thinking I can just get a longer piece of angle bracket to set the seat back a few inches...

Pulled my brake covers this weekend to replace pads and see why my left brake was not operable. A couple issues I need some advice on. 1.) actuator cam/lever on left brake cover is fused to the...

Will a 2 cylinder engine out of a yanmar ym1500 fit into and bolt up to a John Deere 650 tractor?

Just picked up an '83 (I think) John Deere 650 at auction this weekend. My first tractor and I haven't operated one in many many (many) years. I ordered manuals for it and should get them...

Have a JD 650 that is hard to start. When you turn the switch on nothing happens. I turn the switch on and off several times quickly it usually starts. I don't know if is the switch or...

I've been trying to get my JD 650 running well enough to climb the ramp onto a truck to haul it from California to Ohio. It had been sitting idle under cover for 19 years. Two attempts have failed...

Have a jd 650 that is hard to crank. Sometimes you turn the switch and it cranks right up. The next time you turn the key to crank it and nothing happens. If you turn the key on and off...

My 3pt drops slowly while I am mowing. Hydro fluid is good. Can't figure it out and I don't have a manual it was passed down from my Granddad and I am so frustrated. I can mow but have to keep...

does anyone know the flow rate of the hydraulic pump on a 1986 jd 650? manual lists pressure at 2030 psi. i'll be powering a cylinder for a homebuilt log splitter.

I need to fix light wiring and troubleshoot the cold start circuit. Can anyone point me to a free or reasonable PDF version? Thanks in advance, Phil

OK, I was out planting onions yesterday when I heard a terrible sound - thankfully, it wasn't a hose as I feared. It was a tire! How odd I thought as it was just sitting on the pasture, flat land...

I just put a new key switch on and rewired several things. Tractor fires right up but I am not getting any power to fuse block or to lighting. Any idea's? Is there a dedicated ground maybe I...

does anyone know how many gpm at what pressure the pump puts out . my brother wants to mount a 60" agro trend blower on front with a hydro pump will it work?

Does anyone have a JD 650 out there and can look at there starter. There are two terminals on it. The large one at the bottom and small one on the side. My question is there anything hooked up to...

Looking for a good source for parts for my 650. Doing a engine rebuild now and would like to one source everything needed Thanks

I have an '86 JD650 diesel tractor, and I recently had to purchase a new alternator for it. I bought an aftermarket alternator, but just like the original one, both of the wires coming out of it...

Evening All, Just got a JD 650 from my dad. A friend of his rewired this thing (example push button start) and a whole lot of mess. Does anyone have a diagram, I have figured out some but allot of...

Hey all - I'm looking into putting a little loader on the front my JD650. The JD dealer turned me on to Koyker, who gave me a local dealer. Do any of you have any experience with this mfr...

Can anyone tell me about a John Deere 650 Tractor? I am looking for a relitively inexpensive tractor to use primarily digging post holes. I found a 1983 John Deere 650 Tractor on craigslist for...

Hi everyone - I've been sort of lurking on this forum several years and always find great help - ya'll are awesome. But I had to finally post a question as I'm not finding the answer to this...

my jd 650 got knocked in reverse while in 3rd gear it would not shift into reverse or 1st i pushed it back about 20 feet today and it went into reverse and now i cant get it out. i know i will...

I have an older 650 tractor. The mower deck is a POS, and continually needs to be readjusted. I have a woods finish mower that I use on my Massey 135 but it is fairly wide. How do I know if my...

I've got a 650 jd tractor. i had a 3pt s-blower but gave it to a buddy in a moment of weakness. regret it now but whats done is done. i've always wanted a front mount blower but they are few and...

I do not know too much about tractors or farm equipment that is why I came here I guess. I need to know the value of a 1981 John Deere 650 Lawn tractor. The tractor has 4100 hours on it, it's 2wd...

Hello new to this site, I am replacing rebuilding a 2T80 yanmar. did not mark pistons previous to removal. does it matter the direction of install?

trying to locate a shift fork(john Deere p/n CH14900) for my JD 650 diesel tractor. John Deere has canceled this part number and my dealer is unable to locate this part in anyone's stock. May...

I received a private message from Coyote Machine this morning wondering why I hadn't responded to the many posts about my JD 650 polarity problem. Well, if it weren't for his concern, I wouldn't...

Just like the title say. find my self jumping it and charging the battery alot

I have a John Deere 650 I believe a 1988 2WD. I am having trouble finding some part numbers for some clutch parts I found an IPB showing the parts I need but there isn't a reference for the part...

I have a JD 650 (1986) that I bough last Spring. Recently, the battery got weak and my neighbor and I went to charge it on a trickle charger. We discovered to our surprise that it required a...

Bought a 650 a few years ago, only has 300 hrs on it. oil leaking from the tac cable where it threads into the tac. bought new cable still leaks. any thoughts?

Has any tried or know if a pump from a 750 will bolt right on? Hoping to get a little more flow to speed up the loader

COULD ANYONE GIVE ME THE HEAD AND ROD BOLT TORQUE SPECS FOR A JOHN DEERE 650 TRACTOR WITH YANMARE 2T80 2 CY DIESEL ENGINE

Hi I have a mid 80's John deere 650 , 4wd tractor with bucket loader. I'm in the process of replacing the clutch. I've got a copy of the service manual and have followed the instructions for...

My JD 650(1984 w/700hrs.) will lift the mower by itself while I am cutting. How do I set the draft control or get it to hold one postion? Under the seat I see a knob and on the side of the lift...

I would like to get a3pt disc for my JD 650. My dad and I have different doubts for this tractor. I think a 6' disc would be the most this could handle. He feels the most would be 4.5-5'. I need...

Newb here! Over the winter, the clutch on my '89 John Deere 650 decided to stick. Other than cracking it open, is there any tips on how I might break loose? Thanks in advance! Tom

I have a John Deere 650 and the back drivers wheel is locked up. I understand from the previous owner that this happens once in a while after the tractor has been sitting and you just need to rock...

Does any one know where I can get a John Deere snow blower model#359 I Have a 1987 John Deere 650 Thank you Peter from maine cell 207-329- 4686 email pw3320@roadrunner.com

Earlier this week I was scraping snow off the drive with my JD650 and back blade. On the trip back to the garage, a bad noise came from the tranny case followed by some binding and a couple...

Wondering if a 4foot box blade would be too big for my jd 650? suggestions?

I just bought a 1987 John Deere 650 geared utility tractor. I'm looking for a front mount snow blower. I talked with my local John Deere dealer and he said there was only one model that fit it and...

just got a couple feet of snow. first real test with the 4foot farm king. VID 20130210 00002 - YouTube

I have A JD 650, wondering if tire of a kubota b6200 will fit?

Hello tractor world, I have been reading about other people having the same problem I have with finding a fork for a John Deere transmission (CH14900). Can anyone out there help me find or tell...

Any one have any input on a JD 650 2wd.I do not see any hyd. outlets can backhoe be put on this tractor. I would like to do some lite digging and trenching.I am shure this tractor will handle any...

I am going to look at a JD 650 compact tractor with the 2 cyl yanmar engine this afternoon. The person selling says it needs an injector pump. He states it is available from Yanmar for around...

any help would be appreciated in locating one of these. had the dealer do a search and nothing, NLA:( Thanks,

I have a 1984 JD 650 the battery is good and I can not get it started. How do i tell if it is a bad safety switch. I have had this problem on & off for the last two years. It will not even turn...

Just bought a 1989 JD 650 for the garden and finish mowing and it needs the oil changed. I haven't had a chance to get a manual yet so I don't know the oil capacity. I seen on the net someone...

A friend has a 650 with start issues, starter will not turn over, battery has good voltage. He doesn't have any manuals so I don't have a wiring schematic. Does anyone have a start circuit...

Hello All.I am interested in a manual oil pressure and temp gauge for my 650 CUT.Liquid filled direct engine mount gauges are of peculiar interest to me.Is a t-fitting on the oil pressure switch...

My dad is looking for a Garden tractor and found a JD 650 fro $5,000. Has around 700 hours (garage keep) and is in very good condition. Haven't had a chance to inspect it yet but was wondering...

As stated above, I have a JD 650 utility tractor that fails to start. A little background first: New battery, starter recently rebuilt. The tractor will run perfectly when push started. When...

Hello all. Well I just found out that my father in law just bought a new tractor and bush hog. He said I could have his JD 650 when he found something new. Besides it being in Florida, and me...

Hello everyone, I've got a question for you. I've got a JD 650 with an under belly mower deck. I've been thinking about getting a 3 pt mower for it to make it a little easier when i want to use my...

I have a John Deere 650 with low hours and a fresh oil change. With it I have a wood finish mower that it direct drive with a new belt and new blades. Can someone tell me how much this is worth...

Garage kept. Very low hours. All new belts and blades on mower. Fresh oil change in tractor. Shoot me a price so I know what to seep it for. Please don't be jerking me around on a price.

Does anyone know where I could find the black dash that houses the tach, light switch and steering wheel on a JD650. Also looking for a diagram of the fuses in the fuse box, my cover is missing...

I have a John Deere 650 tractor,and when I move the rockshaft lever the rear left for the scraper blade goes up and down works fine but the deck doesnt move I have the two conector links...

Hi All- First time posting in TBN..... :-) . Love this site. We are looking to buy our first tractor. Ive been searching and searching for used at the right price.....I have come across a...

I also posted this in the hydraulic section. I am the recent owner of a John Deere 650. I purchased used the factory optional hydraulic system installation for use with front end attachments...

I am the recent owner of a John Deere 650. I purchased used the factory optional hydraulic system installation for use with front end attachments. What I need is the installation manual for this...

Does anyone know if the bolt pattern on a JD 650 or 750 is the same as a 855? Or if any 650 or 750 owners could tell me what their rims bolt patterns are.

What is the correct model number of a 60'' belly mower for a 650? Also, is the electric pto clutch already on the machine, or is it an additional purchase along with the deck?

New JD 650 owner. Glad to be here.

I recently replaced my voltage regulator on my 650 compact. I need a schematic for the tractor. I don't have any problems, but I would like to have a schematic for the next time. Or I might...

I've been searching for a front PTO for my JD 650 mower. Not having any luck, does anyone here have a good site or know where parts like this can be found? Thanks much for any help, need to find...

Hey guys im just wundering if the JD 650 comes with hydraulic pickups for a front end loader..... thanks :)... any tips to be able to tell?

hey guys, i need to somehow find a front end loader for my model tractor. its a 1983 John Deere 650, with a 16 or 18 hp diesel engine. I need to find a used/new front end loader or a back...

finally got the fuel lines bled but still not starting. I am getting plenty of fuel to the injectors and a lot of black smoke but no ignition. If anybody has any ideas i would sure appreciate the...

I have been searching for a snow plow that mounts to the front of the JD 650. Anyone know if such an attachment exists? THanks for your help. Russ

Does anyone out there know where I can find a loader for my tractor?

After a handful of posts here, I think I've found my tractor at a reasonable price and I'm ready to buy. I'm looking tonite so any tips of what to look for would be appreciated. Pictures look like...

I have a JD 650 compact tractor with turf tires. I recently purchased a Gaspardo FBR 7' Sickle Bar mower for light mowing around the edges of my pond. Would it be possible to run the sickle bar...

I posted this a few weeks ago. Had some lookers but no replies. So I'll try this again. Looking at a John Deere 650 Tractor with Front loader, Brushhog, rototiller, bellymower, and blade. Sold as...

Can guys tell me if this is an OK deal. John Deere 650 Tractor with Front loader, Brushhog, rototiller, bellymower, and blade with 1800 hours for $6000.

I'm not sure if anyone will find this amusing, but being new to tractors I see there is a lot to learn. My father in law was in a serious motorcycle accident, so I've offered to help out on their...

I have a 650 John Deere tractor and someone decided they needed a three point hitch more than I do. I checked with the local Deere dealer and all they told me was happy hunting as parts are no...

I am going to buy a 1981 JD 650 4WD from my Brother-in-Law. It has power steering and when you turn the steering wheel, the engine bogs down considerably. Also, the wheels turn much further to the...

For those who need obsolete parts, I found the following list that cross-references JD part#'s to Yanmar Part#s so that you can order the Yanmar equivalent...

Does anyone have General or specific Information about the John deere 650.

I have a pretty decent 650, but I really want to run a snow blower off the front. Problem is I got no front pto, is there a way I can add a front pto?

I've been wanting to buy a JD 650 for mowing. A friend told me that the early 80's Yanmar engines had some troubles. The 650 has a 2 cyl diesel. does anybody know if these engines had problems...

I've searched and read small tractor info for a few months now. JD's, Kubota, Greys, Power tracs, Yanmars, Isekis. I hate driving and the closest tractor, and the best price i think, is a JD 650...

I have a 1984 JD 650 with belly mower it has about 950 hours on the clock. It is powered by a 17 HP Yanmar Diesel Recently I have developed a starting problem. The starter will not turn the engine...

I had posted this in a different forum, but it was suggested that I move the post over here since it's more likely I'll find additional 650 owners. As an update to below, I did get confirmation...

Well, I found this website and it seems very helpful, so I'm hoping I can get some basic help considering the situation I'm in. My sister was recently widowed, very shockingly because her husband...

This is a corrected diagram of one I posted on another thread. For the Hydraulics experts.... does this look right?? This will go on an old John Deere 650 1982 vintage.

I posted this initially on the General Owner/Operating, perhaps it belongs here. Recently purchased a '84 JD 650 w/snowblower and I've got a few questions for those familiar with this unit. 1. I...

Recently purchased a '84 JD 650 w/snowblower and I've got a few questions for those familiar with this unit. 1. I need an owners/service manual. Any suggestions? If I had a manual I wouldn't...

I figure I'd toss this out for an easy way to fix this problem for a customer. There is a wire (Rectifier) by the JD parts list that grounds out and goes through to the starter. part number...

All, just curious, it seems that many customers out there can basically repair their JD 650 unless it involves the crankshaft. JD quit selling them and many out there cannot find one. I know...

All, the JD 650 I have is 4WD, all works except low range second and high range 5th. Was looking to either live with this or possibly fix for under grand. Ebay has a salvage tractor, rear end and...

All, I am trying to track down why my headlights do not work, I started with the simple, bulbs, corrosion, loose wire etc, now I am at the switch. Not knowing what is supposed to be on since...

Well, all, I have asked for help with my tractor regarding the need of a wiring schematic to help diagnose a problem and I yet have a single respone. What I find Ironic, is that when I was not a...

I bought a JD 650, not a single light works, does anyone have the schematic so I can troubleshoot?

Anybody know if I can put a fuel gauge on the 650 tractor? I'm just tired of having to deal with that float that is in there and I can't ever read it right. I really hate to have to use an...

All, new to posting in the JD site, own a JD 650 Yanmar, prior to this, I owned a Yanmar 1300, Although, parts getting harder, still love the tractor. 4WD with loader. Hate to trade it in but...

Sorry about new post, also a post in the Yanmar section. Having traded in my Yanmar 2wd 1300 for a 4WD JD 650, I posted in this site because everyone here takes the time to help one out. I could...

Haven't posted in a while, but last time I posted was thinking about selling my yanmar 1300 and buying a 4wd yanmar 1610 or 2210. Since then, came across a private dealer who my dad has dealt...

I have a JD 650 and am looking for powersteering parts. Does anyone have a line on parts that would fit my 650. I believe the 186D is almost identical to my unit.

I am interested in installing a Buhler 95 or 195 Front end loader on my JD 650 4wd utility tractor. I am looking for information on loaders that people have installed on JD 650's. I don't have...

Finnally got my 650 MFWD home after the purchase and need a little help. It came with the model 365 front blade that was only used once when it was new in 1983 and the previous then took it off...

I would like to install power steering on my JD 650 4WD. I know this was an option and there was a kit available. I have been told it is no longer available. Does anyone know where I can find the...

Need some help with questions on a JD 650 as I am looking at one to buy. Does it have a live pto/two stage clutch like the bigger 50's. Does it have an overrunning clutch built in? Any other...

I have a JD 650 4wd with 550hrs. I bought it last year and I love it so far. But I have found what I think is a great deal on a 790 4wd with only 200hrs. I was wondering what ya'll think would be...

We've just gotten 10 acres in W.TX and the last owner has a ~'85 4wd JD 650 diesel with 481hrs and a bush hog 5' (not turf tires); he's asking 6k. It looks to be in really good shape, runs good...

I have a JD 655 and have found a 365 blade that came off a 650. This blade mounts under the body of the tractor, not just on the front. The owner can't find a S/N on the blade. Anyone have any...

Has any tried to install a JD 650 snow blade on a Yanmar ym165? The blade is similar to this one snow blade. Anyone else come up with a snow blade option for the 165?

i am interested in buying a small 4WD to cut grass, haul sap and firewood out of the woods. the jd 650, mf 1010, kubota 185, seem to be in my price range. but i've never actually seen them. any...

I recently purchased a 650 4wd tractor, it has impressed me with its power for its small size. I am currently using 5ft implements on this tractor is it to much for it am I indanger of damaging...

Going in the morning to look at a John deere 650 4wd with only 500 and some hours they said it has been kept under shelter its whole life. I'll find out in the morning. They are asking only...

Hi, I found a nice 650 owned by a retired engineer who took care of the machine like it was his child. For a 20 year old tractor, it looks much like brand new. He rebuilt and repainted the deck...

I'm helping friend with brakes. Right side actuator locked,left side working. Brakes have not been adjusted in long time, not sure how much brake is left. No manual. How do I check/adjust brakes...

Alright all you experienced tractor owners. I need some direction on what I should do to my JD 650 to prepare it for winter storage (when the time comes) . Any and all guidance will be...

Looking for weights that fit the front of a John Deere 650 tractor. They hang on the front weight mounting box.

Can a JD 650 4x4 handle a 5 ft. finish mower. I am presently running a 4 ft. finish mower but would like to move up to a 5 footer. <font color="red"> </font>

Does anybody know if the John Deere 670 Turf tire rims will fit on a Jonh Deere 650? They both use 31 x 15.5 x 15 tires. I checked the Deere web site and the part numbers are not the same: the...

Can a belly mower be mounted on a JD 650 4x4 2 cylinder? I presently have a 3pt. hitch mower but would prefer a belly mower if it is mountable. <font color="red"> </font>

When I lift a heavy load with my FEL and the hydraulic relief valve begins to bypass it squeals. It used to be silent about a year ago. Has anybody else experienced anything like this? Would it...

I have a John Deere 650 Diesel. It's a pretty good tractor, does most anything I want it to, but it doesn't have a beverage holder. Without a beverage (beer) holder you can't get much done...

Hello Forum, I've got a JD 650 (18 hp compact 2 cyl Yanmar diesel). The throttle is sticking. My JD dealer told me it sounds like the governor needs to be rebuilt and recommended I remove it...

Saw one with a MMM at the Deere dealer. Anybody know what they are? I assume is a Yanmar. Are they PowerShift? I also posted thin in JD Buying...

Saw one with a MMM at the Deere dealer. Anybody know what they are? I assume is a Yanmar. Are they PowerShift?

I am looking at a jd 650 with a jd loader. deisel w/ 4wd. what are specs for this tractor? hp etc Is a backhoe availablr for it? Will it handle a 5' rotary mower? Any comments are welcome good...

Here's a shot of my John Deere 650 4X4.

Couple basic questions about JD 650 Does anyone who has used one feel its too underpowered? Can someone point me to a site where I can find the specs? Thanks in advance Jim Hannigan Erie CO

I am in need of a rebuilt/remanufactured engine for a 650. Model 2T80UJ. Any leads would help. Thanks