-------------------------------------------------------------------------------- I have a 1999 JD 4200 that has a hydraulic problem. The power steering is working fine but the front loader lift...

My JD4200 4x4 HST is currently stuck in a creek bottom (on dry land at least). The steering wheel turns both left and right freely and effortlessly when the tractor is running. I checked the...

I have a JD 4200 HST that will not move forwards or backwards and the PTO will not function. I was brush hogging (just grass, not clearing woods or anything) and my forward function quit working...

I purchased a JD4200 w/72" MMM. I immediateley removed the mower, and equipted the tractor with FEL & BH. This weekend I decided to mount and use the mower for the first time. I've all the...

If you've been following my "saga" recently, you know that I have now narrowed down my choices of tractors to the Kubota B2910 & the JD 4200. Well, today I went & rode them both again & climbed...

I am looking for a CUT to use on 12 acres I just bought. The machine will be used to move snow, bush hog, dig holes, move dirt/gravel, dig some fence posts, and other random tractor duties. So...

I have a JD 4200 with a loader on the front. I don't have an actual fluid leak but there seems to be an internal leak somewhere. My loader bucket will leak down pretty fast if you don't keep...

I posted pics of this cab for you all to see. Boy! am I happy that I didn't settle for anything less than this cab! It took awhile to come, (of course I ordered it in the dead of winter). But...

Not sure If I'm in the right spot, but we'll see. The dealer is quoting me 10-12 hours to break the tractor in half and tell me whats wrong at $70 an hour. He said the price would start...

Hi has anyone else lost a piece of equipment due to being stolen out of their shed , the shed wasn't locked . I don't know what to do my JD 4200 HST 4x4 CUT gone in the night ya I reported it to...

I am new to this forum. Was searching for information to help me get my tractor back in action. A John Deere 4200 hst. A few months ago the tractor started acting like it was not getting enough...

Sorry to beat you guys up with a well covered topic, but I've got the tractor outside, $300-, worth of nuts, bolts, cable, tubes, QD's, handle, tools at the ready.......oowwww, this could be ugly...

As I reported in other postinfgs, I have narrowed my choice of tractors down to - Kubota B2910 - New Holland TC29D - JD 4200 In the last 2 days I had the chance to get quotes & take test rides on...

My JD 4200 has sat for a couple of yrs and now when I tried starting it it has no fuel coming out of the injector pump. It ran fine when I parked it. It has the Yanmar 3TNE78A-JT42 3 cyl engine. I...

Which would you reccomend? They are basically the same hp and specs. different color.

After several months of only having low range I finally found the time to split the machine in half and investigate the problem. What I found was the 50 tooth gear stuck to the pinion shaft. The...

I just purchased a 4200 HST 4x4 with 400 hrs and it will not pull itself in HI range on level ground. It has plenty of power in low A range, and the bucket works well, but it will not even run in...

John Deere 4200 4WD Hydro will not start, please help me out!!! I was doing some backhoe work and was on a slight incline, went to drive tractor forward and it stalled out. Checked fuel and it...

My hydrostat 4200 JD is having problems starting. When I try to start it, the engine turns over, but never starts. I do not turn it over for long, because when it does start, it starts very...

Hello Again Everyone Have determined that I really need to have a loader as part of my arsenal for property maintenance, now that spring has arrived and now have been in the home for a number of...

In my BIY Stump Grinder project, I need to power two Double Acting cylinders, for raise/lower, and left/right movement of the cutter wheel assembly. My JD4200 has PB and currently powers my BH...

I have a JD 4200 and the forward and reverse pedals stick. You can push down on them and take your foot off and they will stay down. Only way to stop the tractor is push the other pedal. My...

My 4200 started fine the other day after sitting for a week. I ran it a couple of hours plowing snow, shut it down for lunch. Went out, no start. I figured water must have been stirred up in...

I got tired of twisting, turning and squirming in my seat, so it was time to add some mirrors. I've always liked the looks of Jeep Wrangler mirrors, so I got a pair from J.C. Whitney that are...

I am about to buy either a JD4200 or Kubota 2710. I have the price negotiated close enough (the JD is within $500) on a Tractor/Loader/Backhoe package to make price not much of a factor. I'm...

The JD 4200 - 4400 series of CUT's have a grease fitting for the right hand brake pedal that is a PITA to reach as it's buried behind the right cowl panel, and is barely visible with a mirror. I...

Good morning TBN. My JD 4200 HST has had an intermittent issue that now seems to be here to stay. After starting (no issues) attempting to engage forward/reverse on the HST will shut the engine...

I bought a 4200 with FEL this summer and am just getting around to changing the fluids to establish a baseline. It is a low hours machine and the previous owner said they had it serviced a couple...

How do you check glow plugs & block heater on a John Deere 4200. I got it started at 15 below zero ( barely ) I'm thinking it should have started a lot easyer. My diesel vw sits at work 11hours a...

Tractor was running good a few weeks ago. Over the holiday I wired in some LED cube lights for additional visibility. After I wired them up I verified they worked but I didn't start the tractor...

Hey guys, my JD 4200 HST stopped moving yesterday afternoon. It was driving fine while box blading and just stalled out. The blade didn't have anything in it at the time and the engine RPMs...

Was doing some backhoe work on my John Deere 4200 and when I got off to move the tractor forward I believe the tractor seat was not all the way down making the safety switch and the tractor...

Before calling in the local JD agent and putting megabucks in his pocket I am trying to unpick this myself. Engine on my otherwise trusty 13 year old JD 4200 HST compact won't crank. Has been...

John Deere 4200 Subcompact tractor. When I engage the PTO at the manufactured required RPM the PTO stalls the tractor engine. I have my post hole digger attached so I disconnected the PTO shaft...

Hey everyone! I was wondering if anyone out there has an opinion of using a JD MX5 Bush Hogg with a JD 4200. My experience with the 4200 is that it is not as powerful as I would like, so I don’t...

How do you check glow plugs

Hey does anyone have a clue what would cause the rear PTO to keep turning when not engaged on a JD 4200 HST? It is not indicating engaged, and it just turns slowly, but will stop with resistance...

I am in the process of deceiding whether to buy a JD 4200 or a Kubota B2710. This will be my first tractor. I will use it for mowing and general loader work. I really like both tractors. The...

I have a JD 4200 tractor and it sounds like a constant air leak, like come out of a tire, but it's not any tire. It only happens when the tractor is running and it loses power just going up an...

Is the 4200 rockshaft control valve serviceable? Dealer say's it's not and wants about $1000 to replace it. My 3 point will drop and bounce right back up. I was going to try to fix it myself but I...

I have a "2000" 4200 4x4 with a 420 loader, the rock shaft broke off while using a woods 7500 backhole, in addition the lift cylider pistons snapped in half on the loader while in full up...

Driving Tractor in Low Gear and transmission jumped out of Gear Tractor is in Neutral and will not go in any Gear Any Ideas to Try / Fix?

I am installing a loader on a John Deere 4200 compact tractor, and can not find the correct male quick coupler to fit the remotes under the Rt foot rest. Does anyone have a Pioneer or some other...

I have a 1999 4200 cp. John Deere with hydrostatic trans. I bought it new with a backhoe, front loader and have been very satisfied with it. I have 1158 hrs. on it. I have never had any problem or...

My wife and I just bought our dream - we have 4 acres of flat grass and pasture land ( with a great bank barn to store all sorts of toys) My needs would be mostly mowing grass and pasture, but...

The following link describes how I added a horn to my JD 4200. https://picasaweb.google.com/jtpyo.mjn/JD4200HornAddition#

:confused: I have an 2001 model 4200 with fewer than 250 hours. I'm starting to have a repeated problem with the hydraulic system getting gunked up. I've changed the fluid and filters twice, and...

I was mowing today and the tractor just totally shut down while mowing. checked the fuses and the battery in only about a year old. I don't know what else to do? suzanne

Hello. My 2001 JD 4200 HST has been running fine until recently when after a few hours, the power began to diminish, the engine RPM's cut right down and the whole engine would nearly shut...

I am about to buy either a JD4200 or Kubota B2910 . I have the price negotiated close enough on the B2910 and the JD4200 (within $550 of the B2910) on a Tractor/Loader package. My question is...

As I reported in other postinfgs, I have narrowed my choice of tractors down to - Kubota B2910 - New Holland TC29D - JD 4200 In the last 2 days I had the chance to get quotes & take test rides on...

As I reported in other postings, I have narrowed my choice of tractors down to - Kubota B2910 - New Holland TC29D - JD 4200 In the last 2 days I had the chance to get quotes & take test rides on...

Hello, I have a JD 4200 with brake problems. As it is fully hydro, the brakes are rarely used except for steering when I use it to clear snow in the winter. It gets driven on the side of the road...

At the following link are photo albums of small projects I've done to modify my 2001 JD 4200 and its attachments. Picasa Web Albums - Matt I would have used the Tractor by Net photo gallery...

Really wondering what the best route to go with my 4200 would be. I am thinking of adding 4 work lights under the ROPS - 2 forward and 2 back. I am in a northern climate so snow and the LEDs not...

I have found a 2000 JD 4200 with loader (HD bucket), ballast box, turf tires (w/ chains), 5' JD rotary mower. It has 316 hours. The person used it for brush removal and the such. They are...

Tractor is a JD 4200. After using the hydraulics on my 3 pt for a while it won't go down very fast. When the tractor is cold the 3 pt goes down fine but when warmed up I seem to have a problem.

I have a '00 4200 HST and I want to add a 3rd. SCV. There is a guy on here selling a kit for $150 to add it. He says it has the ports, lines, lever cable and instruction. Is there anything else I...

I've got a JD 4200 that I bought new a few years back. Anyways I'm getting it ready to sell. First, I'm replacing all the plastic except for the floorboard and the fenders. Also replacing the...

Posting an issue for a buddy. He has a JD 4200 Hydrostat trans. He says he was working on the driveway and put it in High range "C' to get to the end of the drive, and when he tried to go back to...

tractor was working fine and then all of the sudden (hydrostatic) would not go forward or backward. 2 years ago I had this quy work on it and he showed me a really gunked up filter from...

I have a JD 4200 with 1100 hours on it. Generally I like the tractor and have made several modifications to it that would take time to do to anything different I would get. I would agree with...

Hello from Ohio, I am thinking of buying a JD 4200 compact 4wd tractor with 430 loader and 48 backhoe with a wide bucket. I am going to have to rent a uhaul car trailer to drag it a long way...

I've found a JD 4200 with 50 hrs on it for $7500. It is 4WD HST model and has a mid-PTO, and appears to be in good condition. Currently I don't know the year but these were made between 1998...

When my John Deere 4200 had about 100 hours it wouldn't start because (I eventually discovered) the fuel solenoid had filled with engine oil and that pressure stopped the piston from retracting. I...

My JD is about 12 years old and never failed to start... until today. I don't use it much - less than 500 hours - but use it on frequent occasions for short jobs. I had some rotting stumps to...

I'm down to the above 2 choices. The NH dealer has a '99 TC25D that was used for 475 hrs. at the NH combine factory, and can sell it as new, with a warranty. It has hydro-FWA, super-steer...

I'm trying to decide what this might be worth and would appreciate some input from you guys in the know. It's a 2000 4200 with the hydro trans and a 420 loader. It has about 1,060 hrs. on it. I...

If you've been following my "saga" recently, you know that I have now narrowed down my choices of tractors to the Kubota B2910 & the JD 4200. Well, today I went & rode them both again & climbed...

Stole it for $7000

This week my new Jodale Perry Cab should be coming in for my John Deere 4200 Tractor. I can't wait till I get it. I've looked at several cabs, but I wanted something that does the job and also...

mY 4200 STANDARD has a hydraulic problem. Loader steering & 3pth does not work. Pumps squeels the return hose wants to collapse. I changed the oil, filter rinsed the system with disiel fuel...

I've been torn between two tractors. The 4200 and the NH TC25D. The 25D has 475 hours, being used at the combine factory, so it still can be sold as new with the warranty. With a belly mount...

If this thread should be posted under JD only, please let me know. - I ran into a JD 4200 4x4 W/FL the other day and was thinking you guys might know something about them like values, issues they...

I cannot tell if I have my transmission fluid levels are to standard by looking at this site glass (located near the PTO - rear of tractor) on my JD 4200. The glass always has a small 'bubble' at...

Looking for some help. My three point lifts too high and slows motor down when it gets to the top, seems to creep down too. I tried the adjustment rod with no change what so ever, What could be...

Looking at getting a blade for our first tractor JD 4200 with a FEL. I am asking for opinion on best blade. our budget is $1200 and under. thank you Ken

I am trying to remove the hydro section from the next to rear housing on a 4200 john deere hydro tractor. (see pics) Motor is already off there are three remaining sections: there is the housing...

I'm in negotiations for a brand new 4200 with hydostatic tranny, # 47 backhoe and a 420 loader. We're at around $24,000.00 right now but I have a feeling he could go lower. Any advice? I'm new...

I've had this machine less than a year. It has less than 900 hours. When I first bought it, everything was perfect. I mowed 5 acres field fine in May. No problems, no worries. I notice that...

I need some help with my 3 point hitch valve. Last year it was stiff. So stiff in fact that it would flex the arm of the valve where the lever is rather than move the valve. I dug into the...

Hi guys, I have a JD 4200 with a 420 loader that we purchased a couple of months ago. We noticed the cylinder for the tilt on one side of the loader was bent and figured it would eventually become...

I have a JD4200 and currently use a rear mounted Meteor (Walco) 59" snow blower. However, back issues and surgery now limit my ability to turn around in the seat to watch the rear attachment. I am...

...the problem is that my 420 series loader/bucket interface doesn't look like it will fit the grapples advertised for JD 420 loaders on the internet. I've posted a pic of my interface. Can anyone...

Looking at a John Deere 4200, machine looks to be in very good cond. with 660 hours, 4 wheel dr, seller is wanting 5700.00. s this a good price, any advice appreciated.

2000 JD 4200. PTo lights stays on so wont start. I think I found the PTO safety switch on the right side, behind the tire. put in a jumper plug, NG. Read it was on the left side but cant find one...

Hey anyone out there to help me. I'm going along brushhogging today, tractor running like a friggin champ! Suddenly and without warning, the engine just cut out. Not like starving for fuel cut...

Ken- I've got all four tubes ordered that run from the 'Joystick" to the front ports, (under the Right foot rest). Seems the plastic block that holds them together under the footrest, also holds...

I am in New-Brunswick, Canada. I have the opportunity to take over a lease on a JD 4200, (soft cab, hst, 7 foot FEL "420", 60 inch mower and 60 inch snowblower. It is 3 years old(don't know...

I just bought this tractor (JD 4200 W/FEL) for snow removal. the most snow we get in 24 hrs has been about 2 foot. I am wanting to know if I should leave the bucket on or go with a plow. I don't...

I ran across a 1999 JD4200/4WD/Hydro w/420 FEL and 920 hours on it. They want $8500 for it. It definitely has been used but appears to have been stored inside and well taken care of. I drove it...

Hi Folks, I don't have a ton of info at this point, but I'm hoping something will ring a bell. My neighbor and i are going to be moving some gravel this weekend. He has a 4200 with a FEL (300x...

What type oil should I use for the the 72" mid mount mower on my JD 4300? I didn't get any manuals and the mower manual is not available online. Thanks.

While trying to push over a stump with the loader my wife stalled the tractor and it will not crank over. I jumpered the safety switch for the footpedals. The battery is good. Hope this hasn't...

I was out on my tractor today and the temp gauge just pegged to the right (over heating side). The tractor wasn't over heating. So I grounded out the wire going to the sensor and the gauge...

Hello Everyone. I have been prowling around here for about a month now soaking up all the tractor stuff. Heres my situation. I have 4 acres, 2 cleared so far, will eventually have at least 1.5...

I just bought an ultra low hrs, John Deere 4200 4wd compact tractor and I want to mount a Woods 1012 loader that came off a Ford 1720. The loader has a joystick controlling two spool valves and...

Ive got a 2000 JD 4200. Im looking at buying a post hole digger from Tractor Supply. I am wondering if anyone knows if I can use CAT 1-2 post hole digger with a 42" auger with my tractor if I buy...

My father in law has seen my jd790, fel, 4wd in action and has decided that he needs to replace is 12yr old ih 245, fel, 2wd. We have been looking at the jd 4000 series tractor. Ruled out the...

I have a 2000 4200 and as of late the tractor will just die while using it then it will start right up. It happened to me 6 times today while mowing a large field. Could it be the seat safety...

On a tip from Torch and John, I contacted Jodale Perry about their Cabs for the 4700. They do offer them for models 4200 through 4700, and it does look factory like the orange one. The base list...

My JD 4200 started a new problem today, it starts(after i ground out the thermistor) and runs fine. But when i try to put it in gear, or engage pto it shuts off. I have added 2gl of hyd...

We have a JD4200. The loader only barely moves. Power steering is intermittent. Three point is very slow. Fluid level is full. No leaking is obvious. Don't know location of the hydraulic filter or...

I was given a john deere 4200,14 years old, sat outside in the weather the last 4 years without being run,races and will not throttle down.Trying to go through it to see if everything still works...

I know that these tractors have a history of shifting and hydraulic pump problems (already had the hydraulic oil with filings removed once....) But this latest issue is going to cost me a fortune...

I am brand new to tractors and tractor buying. How much should I spend for a used, 18 month old JD 4200, (200 engine hours), with post hole digger, backhoe, front loader, ballast box, brush...

I'm looking to buy a used JD 4200 4X4 Hyrro with 410 hrs. It was used by a local school to mow grass they trade every year. The dealer is asking $14,900, it has a 60" mid mow deck and for that...

After reading many different threads on here regarding the bucket cylinder leak down, I believe it is time for me to repair the SCV 3 spool valve on my JD 4200 (part #AM124970). I cannot find a...

I am trying to remove my bent tie rod from my year 2000 JD 4200 so that I can remove my leaking final drive unit and take it to the dealer for a seal replacement. I tried freeing up the ball joint...

Steering wheel spins freely not turning tires. When front and is jacked up you cannot move tires by hand.

I am looking at purchasing a 2000 Model of the JD 4200/4WD. It has 420 loader with 185 hours. The owner is also selling a "Bush Hog" 60" rear discharge mower and a "Bush Hog" post hole digger...

I have a 2000 4200 engine 3TNE78A-EJTS the Yanmar injector pump part #719923-51470 I found a super buy on a new pump part #729223-51480 the seller says he thinks it will fit,but I'm not sure if...

A plumber frend of mine installed my septic yesterday and brought along is new JD 4200 with backhoe. He didn't dig the big hole with it (his big yellow JD did that), but his son got up under my...

My JD 4200 hydrostatic drive rear wheels came to a complete stop while I was driving to my shop after mowing the lawn. The steering and 3 point hitch work and when I put the transmission into...

I have a JD4200 and currently use a rear mounted Meteor (Walco) 59" snow blower. However, back issues and surgery now limit my ability to turn around in the seat to watch the rear attachment. I am...

I have a JD 4200 4wd that needs new front tires. It has R4's all the way around and the backs are just fine, so I'll have to stick with the 23x8.5x12" size for the front. I'm just curious, has...

I HAVE A B7100 THAT IS 4 YEARS OLD...ONLY 380 HOURS. I HAVE BEEN VERY HAPPY WITH IT BUT AM LOOKING TO UPGRADE TO A LARGER TRACTOR. I HAVE 9 ACRES...4 OF WHICH IS GRASS TO MOW...I DO ALOT O...

Buddy of mine is needing some help. He borrowed his father in laws 4200 to mow his lot, while trying to shift from low to high range the rod broke at the transmission. Before taking it to a dealer...

how easy is it for a noves to take apart and replace the front axel and repair the oil leaks on both sides on a compact john deere 4200 ? and pictures would be helpful thanks ralph

Gents I have broken tabs on my 4300 left side engine cover panel Does anyone have a Good Left Side Panel for a 4300 John Deere that you are willing to let go? Or any info. on a Good Salvage Yard...

I just replaced a leaky hydraulic input manifold (3 port rubber device) and refilled with hydraulic fluid. Now both the steering and the 3 pt hitch jerk like there is air in the system. I've...

I have a JD 4200, Problem is tractor dies when put in gear. Had a problem with the safety under the seat so I wired direct, tied wires together,(bypassing it). Didn't change anything, wires...

Looking at my JD compact disk repair manual it states on a page numbered 9-3 specifications that the front and rear wheel mounting bolts torque is 72 lb-ft. I thought that sounded kinda light for...

Hi there is anyone running a John Deere 4200 CUT hydro with a 300CX FEL. I have the tractor but want to know if anyone is running this setup and how they like it or dislike it and any pictures of...

I have a John Deere 4200 that I loaned to buddy, when he returned it was covered in mud. The tractor ran fine until I washed it. After washing it when I turn the key I can hear the starter...

I've noticed this winter my John Deere 4200 has a very very slow coolant leak. It only leaks when the temp. Is below zero. And this year where up to about 50 so far,( and tonight March 3 it's...

I'm looking for a FEL for my JD4200. The JD dealer seems to think a Bush Hog 2297 would work for me at $3500. This would include install and quick attach. I already have the joystick and the...

I am perplexed and need a little bit of help. I am looking for a Compact Tractor around 25hp. I will need a Front Loader, 60" to 72" Mid Mount Finish Mower, Rotary Cutter, and the capabilities...

As I was mowing pasture, my JD 4200 hydrostatic tractor suddenly shut off. When I turned the key to try starting it again, the starter wouldn't run and I didn't hear the click of the fuel...

I have a 2000 JD 4200 with a JD 420 front end loader which is bleeding off from the raised position. I know that if the lift cylinders piston seals go bad the loader would bypass oil allowing the...

New member and new owner here! My JD 4200 parking break light will not go off when the break is released. I can move the lever a little and will go off but soon as I take my hand off it comes...

Year 2000 JD 4200 new radiator cap missing rubber seal? Just purchased part number AM102893 radiator cap. My original cap has two rubber seals. One immediately under the cap that seals the cap to...

JD 4200 leaks transmission oil

I have a JD 4200 and am wondering if a 4 IN 1 bucket is to big for it. My neighbor has a Kabota with one and I love it. I actually borrow his tractor just for the bucket. I know that my tractor...

I have a 2000 JD 4200 with loader and 3pt. last month while stacking snow and pulling forward the engine stalled out. restarted and pressing reverse or forward it would stall like a kill switch. I...

I have a JD 4200 with 1100 hours on it. Generally I like the tractor and have made several modifications to it that would take time to do to anything different I would get. I would agree with...

I am about to purchase either a Kubota 2710, or JD 4200. I have the JD 4200 price negotiated to within $500 of the Kubota (Both packages include Loader & Backhoe). I will probably go with JD as 1)...

What Model Yanmar motor is in a 2001 John Deere 4200? Is there a source to find out what motors where in what tractor? Tractor data does not give the Yanmar model numbers just displacement.

I went and put out a bale of hay today and on the way home I was in C gear going down the road and the tractor started acting like someone was puting on the brakes and soon after that the back...

-------------------------------------------------------------------------------- ok i have a 2000 jd 4200 26 hp diesel engine i want to turn the fuel up to get a little more hp. but i dont...

Hello I am disassembling a 4200 john deere tractor Hydro with 4wd. ser# LV4200H321983 Deere does not show many internal parts on their...

Just asking for some assistance on installing a MMM on my 4200. I bought the mower from an individual, 60in - 1 year old. My problem is that when I received the mower and parts it did not come...

range shift selector broke off flush going into transmission....help

I have a 4200 and I have had it for a few years now and have been very happy with it and surprised with what it can do some time but other time I wish it had a few more horse power so my question...

I have a jd 4200 that starts fine runs at idle up to 1500 rpm fine but go over that and it starts sputtering-rpms drop and sometimes quits all together and I can restart it at idle and run fine...

Our 2wd tractor has 13.6 r16 Carlisle turf tires on the rear. We operate in mostly steep and moist conditions so I'm needing to change to a more aggressive ag style tire. However the only options...

my 4200 rocker arms wont lift i have changed the hydro oil and replaced the filter and cleaned the screen and replaced the gasket also put in new oil and its full just to the top of the sight...

Hey All, need some assistance my JD wont start, power on dash seems to be on but starter/selinod will not engage???????? i have replaced the nuetral safty switch i few monts back and was starting...

Hi. I'm looking at JD 4200, including FEL and 3p mower with 1200 hrs for 12K. Is that a reasonable price? Also, are there any problems with the 4200 size? I've heard that the frame might be...

A couple of simple convenience items meant to make draining antifreeze easier and less messy on my JD 4200. This picture and the next document this low cost addition...

I have a front seal leaking on my JD 4200 4 wheel drive. I have looked at the parts catalogue and it looks simple to replace. Has anyone done the work.

ok i have a 2000 jd 4200 26 hp diesel engine i want to turn the fuel up to get a little more hp. but i dont know witch screws to turn for more fuel can any one help pics would be great or...

Checking to see if anyone knows the value of the items. I am looking to buy/trade from a client. Both machines have only about 100 hours but are very weathered. The seats all need to be...

We have a 4200 cst tractor that we cant get the clutch to work at all. We tore the tractor apart due to a broken pto brake housing and some transmission problems. We reassembled it by the repair...

I have a JD 4200 with a 72" mid mount mower. The mower does not respond to the tractor's lift / lower commands. Probably a hydraulic cylinder. Any idea how hard to repair / replace myself? When it...

Curious if anyone has any experience installing the third SCV kit. The reason I ask is because the kit is virtually impossible to find (would love to buy one if someone has it) but I think I can...

buyjd-ML-560677-ML- Brand specific. Moved to JD Buying/Pricing

Can anyone please confirm whether or not the JD 430 Loader fits a JD 4200 Compact Utility Tractor. I am looking at buying the 430 loader for my 4200 tractor, but want to confirm it fits. Thanks

Hello all, newbie to the forum here...here's my problem, my '99 4200 w/ hst jumps out of gear (B range) while moving. Problem seems to get worse as fluids get warmer. Tried to tie a bungee to...

I recently traded my JD 4200 in for a new 3320. I decided to keep my 47 backhoe for the new tractor. This required me to purchase new mounting plates for the new tractor. I found out the hard...

Aftermarket Hood New in box. Includes Fuel Lid I purchased it and don't need it now. Never installed. Located in Muskoka, Ontario, Canada (P1P1R3) $300 no taxes

Does anyone know the torque settings for rod & head bolts for a JD 4200? Also the valve settings? I'm trying to help a technician on another tractor site.Thanks,Jim

Just bought a 4200 with 700 hours. is there adjustments to the 3 point lever? lets say all the way down is 0 and all the way up is 100. when i move the 3 point lever up to lift my flail mower it...

I found this kit on ebay. I already installed it on my 4300 so I don't need it. The install is not very hard the directions are pretty good. You would need to have Power Beyond to use this kit...