Search results

My Mi-T-M gas washer is 4.6 gpm with an 11 hp Briggs, belt drive pump. It has a pressure adjustment on the bypass valve but I've never tried running the engine at a lower rpm to see what happens, would have to fool with the governor adjustment to do so. My well can keep up with the washer but it...

When I was a kid in CT I worked with this old German guy winterizing the lake houses in early fall. The woodchucks would always burrow down beside the basement walls. The old man would go around to bars and get empty liquor bottles and we would throw a couple bottles in the hole and smash it up...

I don't have a problem just using my boxblade angled back a little bit with the hydraulic toplink if there is much or larger stones. The small stuff disappears pretty quickly when the grass starts to grow again. I do the same with adding dirt to low spots in my yard during grass season -...

Yea, when I bought my mower I didn't try lifting it until later at home. To me it feels like mine has the pivot point of the weight too far back to pick up by hand. I CAN do it but very risky about pulling my back ... I'm 66 years old but I can still sling 80# bags of concrete up chest high and...

You have to have at least a very basic knowledge of a 12 vdc system in order to TROUBLESHOOT a problem - "research" on youtube or advice from one of these parts store mechanics and firing the parts cannon at it probably won't do anything but flush your wallet. In rare cases you might hit across...

This will be season 6 for my CC Edge XLT w/60" deck, Kaw. engine and joystick. My approx. 6 acres I cut is pretty rough and some hilly and I've had very little scalping problems. My front axle pivots which allows the deck to follow the ground better plus I don't cut my grass as short as pool...

I used some in the concrete slab for my shed out back years ago - don't know if it made a difference or not but got rid of some of it.

I'm about 15 miles from a TVA coal-fired steam plant and when they restart after a shutdown they obviously do something with some sort of pop-off valves or something with the steam system and it sounds like artillery. When we first moved here 15 years ago we thought it WAS artillery from Ft...

Bought my 4110 new in Feb. 2002 (it's a 2001 model) with 3.2 hours on the clock and it now has 2230 hours. Have had some problems over the years but it still runs strong, uses no oil whatsoever and it starts readily year 'round whenever I need it. It has been a real workhorse overall and still...

Getting a break today from my latest digging project with my tractor, raining but we need it here. Almost done with it anyway, I'm digging out to build a fair-sized storm room/root cellar in the hillside. Over the years I've read here from some that say a FEL is not for digging, I have to...

The pollen sure is heavy this year but it's nice to be in Spring again - getting some varied tractor time in the past couple of weeks. I always get to use my tractor a little during the winter but it sometimes goes a month or better inbetween times, this time of year it rarely sits more than a...

Just bought a used tiller today - the BL60C that's in great shape except that it needs new tines. I knew it wouldn't be cheap to replace 36 tines but Kubota wants $14.95 each for those things !!!! That's $538 for a set of tines plus our 9.75% sales tax, over $600 !! The tines appear to be very...

Has anyone else been pricing a TN70A lately ? Just trying to get an idea if my closest dealer is in the right ballpark. I'm getting ready to upgrade tractors soon and the NH looks pretty good to me so far. I'm looking at the MFWD platform model with loader, my dealer has a 2007 on the lot for...

I'm hoping someone here can lead me to the valve part I need, I've searched the 'net quite a bit for it, checked with Mahindra of course, can't seem to find anyone that handles parts for this valve. My Mahindra 4110 came standard with 1 set of rear remotes but it has a 2 spool valve and the...

I'm sitting home today trying to nurse my broken pride and right arm (broken right arm, that is) that all came about at quittin' time last nite. It will probably take me 2 hours just to type this little story of mine. I was loading the same tractor, on the same trailer, behind the same truck...

Well, for over 5 years now I've been repairing my FWD on my 4110 and I'm going to hopefully take care of the problem once and for all - I'm replacing the rear tires with the proper size. Really hate having to change those expensive jewels, they've got between 50 - 75% tread left on them and have...

I need a dealer that's good with parts for my 4110, my selling dealer is no longer a Mahindra dealer. In the 5 years I've had my tractor I've broken probably 7 or 8 front axles and 2 countershafts, I keep a spare of each on hand. Last I talked to a tech at Mahindra a couple years ago he said I...

Has anyone checked into getting parts for the original remote valve on the 4110's? Mine is a Daesung-Nachi 2 spool valve with the original 1 set of hoses and 1 control lever that came on the tractor. I just recently noticed it was a 2 spool valve since I'm getting into putting a hydraulic...

Anyone out there know where to get a joystick kit for a Daesung-Nachi 2 spool valve? This is the valve that came on my Mahindra for the rear remotes, which only has one set of hoses and is only using one spool at present. I would like to add the joystick and another set of hoses to make use of...

I've had my 4110 for 3 1/2 years now and I hate to show my ignorance but can someone explain to me how & when to use the draft control in simple instructions? My only other tractor I owned before this was a 1958 IH 340 Utility that had draft on the hitch but it was "automatic", it only had the 1...

Well, since my last post on this subject I've talked to Mahindra a few times and it's just as I expected from the beginning - they aren't going to do a damned thing for me. They haven't even sent me the updated loader frame brackets they told me they would - has been over a month since the field...

After a month of trying to get my tractor repaired, I finally did and have found out the reasons why I had so much trouble. I gave up on an answer from my letter to Mahindra and started calling them. I never got to talk to customer service but was directed to tech service and subsequently talked...

I've had my 4110 for 3 years now, have 690 hours, and have been extremely happy with it up until about 2 weeks ago, when my problem hit me. My tractor would make a horrendous noise when trying to lift a loaded bucket which I found out was the flywheel rubbing the nosecone off the starter !! That...