Search results

My Kubota’s only a couple/few years old and already a dead battery, by chance my ranger battery is on it’s last leg, my riding lawnmower battery is kaput and I have a stack of other dead batteries. This guy claims that this charger will fix any and all dead and depleted batteries and he has...

Ok, 500 a piece Thanks very much

Can anyone here tell me approx how many gallons of water these might hold? Dimensions are approx 36x116 long. I was told they were 1000 gallons a piece but I don’t see that. Thanks for taking the time to educate yourselves

Yes, I definitely do this

Should I be concerned with running over my drain field with my L2501 FEL backhoe assy? New construction home I’m building, corrugated half round plastic drain field maybe 2ft in diam. I installed myself while the experts watched me clean up their installation. I’m assuming that the old story of...

That’s pretty neat, after doing a little research I’ve decided to just rent a trencher. It’s 200 a day and I wouldn’t be tearing up my tractor

I have all sand, no rocks. I am considering using the forks on my pallet fork, maybe a little at a time.

Can someone tell me the narrowest bucket attachment available for my bh77 backhoe and where to find other than paying dealer costs? I’m in need of a trenching bucket but I’ve read they load up easy so your off the tractor more than on Thank you

Thanks everyone for the replies and suggestions

Not to change the subject but this is the image I saw earlier Again I DO Not visit any dirty sites, I have no interest in that

I’m wondering why I am seeing pornographic images within this page? The second I went to make a screenshot it disappeared? There is no one that looks at garbage like this in my home

How much consideration should I give placement/height of these 350 gallon totes around my property for gravity fed irrigation with a watering wand? I understand I’ll need to get them elevated but is there a tremendous difference in volume/ pressure of water if they were 6 feet off the ground...

I’m looking for some ideas. These walls are 12 ft high, I need to go up another 6ish feet to reach my gable ends ( soffit and gable cladding work ) It’s easy enough to get that extra 6 feet rigging up an extension under the bucket but on S side there is a breezeway that is in the way. I know...

Ok, thanks guys

Is an aftermarket version going to be the same as Kubota’s? Napas even more expensive than dealer and he tells me there is an inner and outer? My research tells me there is only an outer Does anyone have an OE part number for the outer? Thanks Any opinions welcome

Help me to decide Try to keep short Foundation is 18 thick, dug down and removed approx 10 inches of sugar sand. We get large amounts of horse manure dropped off free throughout the week, regardless of what google or scientists say we have had very positive results, ( we literally have thousands...

Good morning. We are considering an FRC 800, maybe your not at all familiar with this model but I haven’t found anything negative at all online. Going to look at it tomm, guy wants 1500 for it, a lot of money. Appears to be a 2002 ( approx ) model judging by an emissions sticker. What can you...

I have an old Kubota B6100 that I’d like to add a tiller to. Sandy soil, no rocks, I’d like to turn loads of manure into the sand. Any recommendations I’ve seen astronomical pricing and I’m hoping that I’m just seeing larger tillers than what I’m needing. These areas are fairly small garden...

We drove to Georgia yesterday and picked up a bundle of doors from a 1930s schoolhouse, they are similar to what I grew up with in our home. I will make the locks work again but not sure where to start? A lot of skeleton keys and some more moderns. Any suggestions? Thanks for that Also I’m on...

Recently a vehicle crossed the median, drove through 2 of my fences ( one inside the other ) flattened a picnic table and knocked over some trees. He was evidently not the at fault driver, ( even though he had to have his vehicle towed off our property) At fault fled the scene. Southern auto...

Thanks to everyone here, the unloader valve was frozen open, I unstuck it and it operates flawlessly now. I will get a new valve cause I noticed that it could potentially get cocked a little sideways and get stuck again. I will not run the compressor any longer without an 8 gauge power cord...

Thank you to everyone that helped me with this compressor. I pulled out the unloader valve, found it stuck, made the repair and now the compressor works flawlessly every time. I’m going after a heavier duty cord tomm. I hope because I don’t want the compressor sitting outside in the sand, I...

Is it safe to assume that this assy is the unloader valve assy? I’ll have to see if it can be purchased separately from the switch if so.

Ok so I need an unloader valve. Thank you I may post another pict or two for clarification

This roll air compressor runs as quiet as a church mouse when initially started but refuses to start back up as it should once the start up switch detects that the pressure has dropped sufficiently. When it’s running I can hear air leaking, discovered air leaking back out the air intake tube...

Come to think of it I’ve got the shop windows to do so I won’t be done this week but I’ll get it

Thanks for all the replies, I have not done it yet but I have climbed up there numerous times and unsteadily using a rope to pull on attached to tractor on other side of building. The underlayment on there is good for many months. For unrelated reasons I’ve decided to install my windows and...

Post 16 identifies a probable problem that needs correction

When it shuts down it blows air back out the intake tube. Hard to even cover it shut with my thumb. Soon as air stops leaking out intake tube I can plug it back in and it starts fine

Thanks, will post better pics in a bit I do think this may be the issue Not to dismiss any other theories but it gives me the impression of being hydro locked so unloaded valve is a good start, I’d also agree that the 100 ft cord and amperage drop isn’t helping, I did run my small camper with...

I’ll have to post more pictures I guess, check valve could be in several places.

There is something leaking, don’t know where the leak is or if there are multiple. I put my ear to the compressor this morning and it sounds internally ( in the compressor itself) Is the check valve located internally? Maybe I’m just not distinguishing where the noise is coming from. Can you...

I picked up a couple of compressors, one is electric the other gas. The electric starts up fine from my temporary power source a hundred feet away with a 100 ft 15 amp extension cord but as soon as it needs to automatically re start itself cause the air pressure drops it will not start, it just...

I’m also building an 8 ft scaffold that will attach to the forks on my tractor, it will allow me to do the soffit installation which has been quoted at 7000 ( hardi board materials already on site for roughly 600 dollars ) I will also be able to do my gable ends on the garage ( do not have any...

Might be so I climbed the roof today using hand over method, did it 3 times, sat for a few at the peak, tried it with the vest on once using the clincher that comes as part of the kit and it didn’t work for me as in I was very uncomfortable I ordered these items this morning, I’ve since learned...

You first

What do climbers use for a safety cinch on their ropes that only allow one way of freedom unless they use some sort of positive release? I bought the guardian fall protection kit and am not at all satisfied with the mechanism they use because it doesn’t actually lock the rope in place until...

One metal sheet, I have ideas for that, if you can think of the name I’d appreciate it, can’t imagine at this point what you would be referring to. Thanks Ok roof jacks I thought about them, thanks again

About 10 thousand dollars plus to install the metal roof on the garage, there is no doubt in my mind that I can do the work myself but I am scared to get up there because of the 8.12 pitch. I’ve tried, can get my foot off the ladder but even with the safety rope I can’t seem to get the nerve...

Power not available and solar will never keep up with usage

Is it possible to have a gas powered lawn mower engine start itself via its electric starter and charge its own battery at a pre determined point of battery discharge In other words I want to keep a battery that I use to run a pump charged to a safe level versus discharge it to a point of...

Thanks for the comments

Thank you for the help

Good morning, I recently picked this up with the intention of a back up mower. Came to find out it has at least carb issues I.E trouble starting, idling and powering up the mower I ordered a parts book thinking I would possibly get a usable part number for a carburetor but the book seems to have...

Thanks, I’m gonna pass based on the lack of enthusiasm from the overall majority. Going to look at a 67 Allis Chalmers B-110 today, if it runs and cuts I’m all over it and will bring it home just because I feel it’s a no brainer

I have a chance to buy one for 750 Need a dependable mower that’s turn key yesterday and the price on this one is 750 It’s had the green painted half ass but not a bad looking tractor with any rust issues that I can see Guy claims it’s single cylinder Koehler engine is sought after by collectors...

Thanks for all the input, so it sounds safe to assume that there isn’t necessarily a deep cell battery that will last longer in terms of powering my pump than another. I do not want my tractor idling all day…… day after day while running this pump Looks like unless I want to get into stupid...

I’ve got this pump mounted on my water trailer pulled by my tractor https://m.northerntool.com/shop/tools/product_200578549_200578549 I’ll need a new battery to power it since the one in the Kubota isn’t the marine type and so discharges quickly Are all marine type batteries the same as far as...

I’m wondering if this thing is like many older cars in that if I disconnect battery and it dies that generally means alt is no good? Won’t hold a charge, fairly new Wally World batter ( about 3 years old with a 5 yr warranty) Anyone change an alt in one of these? I have very little experience...

Picked this up at an estate sale last weekend, I’d like to find a manual for it but am unwilling to pay high eBay pricing, anyone know of a free download? Not running and don’t know last time it ran. Decks and tractor are not in terrible condition, I don’t see any rust out anywhere. Anything...

I do not have a better pict at this point. I understand now how it works as originally intended to be used and thanks everyone for the info

I definitely have this planned

I’ve never seen this sort of attaching manner. Do I need to just cut it off and weld on a standard receiver? It’s attached to a large water container Thank you

I'm thinking of getting or making this set up. I wonder if my B6100 3pt would lift the pallet. Prob. not Thanks

I have the block being delivered the 3rd, I have an extra pallet already waiting. It will be interesting to see what it can lift and Ill report that back here

I purchased this Titan Attachments 46" Pallet Fork Frame Attachment with 42" Fork Blades 793573218032 | eBay and Im wondering if my Kubota will at least lift a full pallet of cement block far enough off the ground so that I can shuffle them around? I believe there are 72 blocks per pallet. If...

Does not pertain in my area, I believe it is anything 25 miles or less to seashore. Dont quote me on that. Im further inland

Is there anything else that maybe I could submit to help make his job easier and cost me less money that he may charge? Thanks

Can you tell me where to look up number? Can you tell me if you see any issues with the information below. I have a meeting with architect on the first of next month, Ive been waiting weeks just to get this appointment. I dont know how many more weeks after the appointment Ill have to wait just...

Thanks for the tips, advice, experience. I would prefer to deal with a local limber outlet but the price difference is VERY substantial. My biggest fear is purchasing windows that will not pass code, as far as I know you typically cannot buy a window without a Florida approval code but I have...

I plan to build my own home, its tough to find anyone that isnt just a salesperson and possibly impossible to find information of any kind at the big box stores. Can someone here tell me the differences in window varieties that I should be considering when building a block home? Im not that...

Thank-you for the replies

I'm not looking for dednutz accuracy I understand that you have to account for Windows and Doors I'm just looking for a rough estimate

I know there's online calculators but they confuse me. Plus I'm out in the middle of the woods and the Sun is overhead and I can barely see the screen of this phone. Can anyone here tell me how many standard cinder blocks it would require to build a 30 by 40 building with 8 ft walls?

Come to find out according to the county the cloth is not mandatory nor needed. It would have passed inspection whether it was there or not. Evidently the slits are facing in a way that sand supposedly will not fill the infiltrator. I am anxious to examine these more closely this weekend when I...

What is going to keep the loose sugar sand from going inside the infiltrators and clogging any drainoff as it leaves the tank and flows down the infiltrators? There are holes in the sides. I guess Im not seeing how laying hollow half round plastic tubing in the sand is going to...

They brought out a 50 hp tractor to fill or cover up the drainfield, a tractor would have destroyed the field by running back and forth over it, they should have brought a mini ex or something similar with a long reach bucket to fill it in. They simply do not care and assume I am ignorant...

Ive said it before and Ill say it again as a warning, you have to watch everyone cause they will always do whats best for them and disregard your interests.

New system that has finally passed inspection, during cover up I noticed the sand making holes in the drainfield fabric. Large holes as in tears. Why would this happen? Cheap fabric? I told them to stop. They claim fabric isnt even a county requirement. I do not believe that and am going to...

larger?

I had my septic done this past Fri and I thought some of you guys might like to see pictures. Only a few hours work for these guys and Im glad that I paid someone to do it Has to be inspected this week and covered up.

Yes, same idea but no holes in or around the spokes or hub

Inflation, sign of the end times. Repent while you still can and no Im not joking and yes this is concerning religion. Have a great day!

My T1460 has a wheel that needs removing, the cap on the wheel is not watertight and there was alot of water and rust in there. Ive got the nut off and have tried puller but because of the tolerance between the underside of the wheel and the plastic instrument cluster shroud I am limited on what...

Chainsaw as an example. Not often any more and usually long enough to get rid of a fallen tree

So maybe the best option would be to start it and let it run a while every year or so and change out the fuel that has an additive in it every couple of years.

I have some tools I might pick up to use for a few hours one day and then not touch it again for several years, Im guessing running it dry is really the only option other than hoping for the best.

Im tired of having problems with small engine carbs and I plan to do something about it. In my area finding ethanol free gas isnt easy and from what I have read dosent necessarily solve the problem. I know that running the fuel tank empty at the end of the season isnt the answer either...

Thanks, Ive already ordered a new seat and rear tires, needs a belt and a couple of small items plus a good tune-up/fluid change.

It needs a seat, a belt and some maintenance but I am happy to have it. Will be a big help on my property cause slowly the sand is becoming devoured by grass

Ill have to check it out again next weekend. I did not have any issues with shifting this weekend. I only use it to pull a water tote around the property. Thanks everyone

Everything seems fine with my truck so who knows I guess where it came from

I'm headed out there now to where the truck is so I'll check it out I didn't even consider that it was actually something that was part of the truck

Pickup

Seems like Ive seen something like this before, I believe it is only a small part to a much larger machine. It fell onto the floorboard from Im assuming the underneath of the dashboard of my Ranger last weekend. It is quite heavy for its size, I believe it to be quality steel because of its...

If its built like the one above youll prob never have to buy another finish mower. Good luck with it

This is a well built mower I recently purchased that I plan to put to use after cleaning up. Can anyone here provide any information about the mower, nothing online worth speaking of and although Ive been in contact with the manufacturer they haven't proven to be of much use. Also can anyone...

This was a fun project and I appreciate all the kind words given throughout this thread.

These are in a desert, Candler sand. Im hoping once established they will require alot less maintenance. Some of my other trees are fairly newly planted and larger which require 6 months to 1 year for root establishment.

No

This a a 5 acre lot that I drive around. Trees are at the perimeter of this lot

I have no way of elevating a 275 gallon plastic tote to get any decent pressure. To use a smaller container with my FEL elevated would mean numerous trips to the well to replenish. More time is something I dont want to give

I have a little over 300 small trees, It takes an approx count of 6 1000 to dump 1 gallon of water on a single tree under the pressurized system I use now, I do this for every tree, I need pressure to get this amount of water in a realistic time frame. I spend already a little over 9 hrs every...

Seems like I need to learn a little bit about inverters, I know nothing about them but I think this might be the way to go along with the 120V 10 amp pump I have been using. Thanks

Thanks, Ive read that these types of pumps are continuous flow though, Ive read that turning them on and off via a nozzle will burn them up in short order.

I have been hand watering about 300 trees on my property using my generator, a small 120V 10 amp pump and a 275 gallon IBC tote. I pull these around using my trailer and Ranger. Im gonna burn up my generator, it takes a few hours to accomplish this and Im looking for an alternative. I...

Thanks again

Most of the label is missing, well built mower with a replacement engine and many original parts missing but overall runs and cuts well. Owners manual would be helpful if anyone might know where one is avail. Thank-you

She is in the hospital tonight and I dont know how long she will be there, they dont know whats wrong yet, might be lung cancer, might be tuberculosis might be something else, she dosent deserve to be there, she is a phillipino, she has never hurt anyone in her life, very gentle and timid unlike...

Anyone here have one? Do you like it?

I have a 2" PVC pipe with an inside diam of 2.067 that is 100 feet long. Also within that same pipe is a second sealed 1" pipe that has an outside diam of 1.315 same length. How heavy will the water be? My intention is to push that column of water from the bottom to the top and I need to...

I do not want to break the plastic safety shroud by prying against it but Id guess that small pin has to be moved/removed to remove this shaft? I tried gently moving it but no luck as of yet. Thanks

Some of you may remember this thread https://www.tractorbynet.com/forums/owning-operating/428272-good-deal.html?highlight= Ive decided its time to buy the parts. I need all 4 forks, 3 are bent/re-welded basically junk and 1 was missing completely, I found a source online here Login : but the...

I have the well done, electricity on property, Im considering the septic system next. I know where the home will eventually be built, well is in the rear of home, septic would be at the front which already has a natural downhill grade. Where might I start to collect the info I need to know to...

Or I could cut out the old and use my resistance welder to re attach. I wasnt asking how to fix it but thanks

I purchased a used left side cover for my B6100 ( at a high price ) only to find out that there was no clearance for the oil filter removal. My original cover ( which is a stretched out mess ) had a factory modification that I plan to convert to this new cover but Im wondering if there was an...

Hello and thank you for your time. I am considering placing a mobile home on my property. I have been given the authority by the county. I know nothing about mobile homes. I have been told it needs to be 1976 or newer, has to have a title, minimum of 500 sq ft, has to be hud approved and wind...

I have to do alot of trenching to bury some water pipe and do some electrical. Someone suggested a middle buster but from what Ive read online they seem to have an approx max depth of 12 inches. Id like to go just a little deeper than that if possible. Does anyone have any suggestions or...

If need be I plan to pull water out of an abandoned well on my property for consumption and whatever. Is it enough to simply boil the water and if so for how long? Thank-you

My B6100 had something threaded into the fixture attached to its left fender. Any guesses on what that might have been? Thanks

I am seriously considering getting my license, I would like to have access to the products and I feel it could easily pay for itself in a short time. From what I gather its not an overly complicated process and its not something that local or state government will be breathing down my neck on...

How can I understand better what an ag exemption is and how to utilize the full benefit potential of that exemption? Im not wanting to call my local government office and receive their often watered down interpretation of the laws. Id like to understand what Marion County specifically says in...

Tractor supply had many trees under an overhang completely neglected, more than 30 of them were fruit trees, I was able to buy them for 5 dollars a piece. Average height is 8 ft some 12-14 and some 5-6 ft high so nice sizes. They need help, the pots were much too small, they werent watered in...

Im meeting the Seco engineer this Fri. There is already a pole and line running past my property on the same side of my property. Is there anything anyone would recommend to me or any experiences that I can learn from? I understand that things vary from state to state or county to county even...

I am seriously considering this for a ground cover in place of conventional ground cover on my property. I am considering it because A- I feel that a conventional lawn is a complete waste of energy and resources any way its looked at, Id like to think Im more intelligent than the average...

Gen went down again this weekend. Left me stranded with no water for my plants. I think I may be able to get it going once again but its prob. on last leg. Gen portion is fine, its the 13 hp small engine that is worn. Whats the chance of adapting the gen to my pto of the b 6100e? I have a...

I know very little about farming but that is changing. Ive staked out an area 200 feet square, at this point there is some bare spots still and some areas where native grasses have taken over. My plan is to plant sun hemp next season, what is the cheapest/most efficient means to get the seed...

I dont know if its avail. I see it advertised as a reprint for 13.00 online plus 7.00 shipping. If you find it ill paypal you the 13.00. First Choice 5 ft finish mower including part numbers. I dont want to pay the shipping. Thanks

Someone I know offered me this first choice finish mower for 75.00. I know zero about finish mowers. I know it needs wheels, at least a pulley and belts. Don't know what else. He knows nothing supposedly about it. He traded it for some paint work. Deck width is 5 foot. I dont even know if its...

I'm gonna wait a couple of years to start but in the meantime I'd like to start reading what I can about monolithic slab formation. Ive been told that the majority of expense related to the slab is in the formation not the actual concrete. I haven't confirmed this. I should be looking for the...

Im always on the lookout for a B6100 4WD parts tractor. My tractor is just horrible in the sand, really limits me on what Im able to do. Im hoping once I get something down on top of that sand Ill be able to do more with it. In the meantime I thought Id post some good examples of whats for...

Can someone tell me which side of the generator I should be plugging in my well pump. Id assume the left. That where I get the power for my camper a/c.

I saw this one sitting outside and I liked the shape, I bet it was a good looking tractor when new, not like the plastic aesthetically unappealing many of us have today. I havent seen many really good looking tractors since I havent been interested for very long but someone made something in...

My water table has dropped approx 20 feet since the last time I measured ( 3-4 weeks ago ) Does anyone here have any real world knowledge of having this happen and can possibly explain that? I was told by the original drillers that a water table typically only drops a few inches at the most...

I know alot of you guys have spent your lives growing things. I have 211 Holly trees that Ive planted in the ground on my property in Dunnellon. They will supposedly reach 25-30 feet height someday. At this point the tallest tree is approx 1 foot tall. Supposedly under the right conditions they...

Some of you may have read that I recently had a well put in, long story short they gave up on the first hole after breaking their bit and some extensions off ( still at bottom of well ) Ive measured and the casing is approx 128 feet with about 40 feet of water in it. I hate to just fill in...

Now that my land clearing is pretty much done Id like to clean up my tractor, its shy of 200 hundred hours but because water was like gold on my property I wasnt able to keep it as clean as I would have liked. I did powerwash it a few times with a small greenworks ( lowes cheap ) washer and...

158 feet of casing and crystal clear water which is uncommon for my area. Driller thinks I tapped into a spring. Now I have to deal with the contract I signed authorizing them to use galvanized pipe. Didn't know at the time that poly pipe was really a better option. They haven't installed...

I have a little older Kubota that I havent used in months just sitting inside my container, I have zero idea of getting rid of it, thought worst case scenario ( best case scenario ) is one day Id like to bring it too a show and show it off, what should I do for storage until that time comes...

I am needing a set to use intermittently at this point. I dont want to buy the cheapest unit I can on E-bay but not sure I need to spend several hundred either. What have you guys had luck with? I need to move a large compressor and a very heavy toolbox at this point from one shipping...

I had a unit set up for last weekend with driver/operator. That fell thru. I am considering renting a D-5 with 6 way blade and doing the work myself. Am I asking/expecting too much from myself like I had done with the wheel loader or is a bulldozer almost a no brainer cause its a tracked...

First Part : Lets say you have 2 bricks of equal weight but made up of different materials. Lets say one of these bricks is much much larger than the other ( but remember the same weight ) Lets say you throw both bricks using the identical amount of force in the throwin. Will the larger...

Can someone tell me what the formula is for site preparation/ drainage away from house pad. In other words how much of a slope should exist 50 or 100 feet away from home? Nothing but loamy sand that drains well but im assuming at any distance from home there should be a drop in elevation and...

Been meaning to ask this but why does it seem my Kubota L2501 loses forward mementum when I am working the hydraulics? Its a manual trans. In other words if Im moving in any gear and I use any hydraulic function on the tractor the machine seems to lose just a bit of power

Im maybe jumping the gun here by asking questions but trying to prepare. Looks like I've bought the tractor seen. Ive bought it sight unseen. I am buying it from a friend of the guy that helped me on my property this weekend. I trust him and his judgement. If it turns out I get burned than its...

Seems like we have some plant experts on this forum and Im glad. I dont typically have a problem with growing plants but I know zero about technicalities and have so much going on with my land project Im hoping to get some dummied down info for this plant dummy. Ive ordered these 5-Nellie R...

L2501 less than year old. One of the hoses that feeds backhoe starting pissing fluid. Rubber part no where near couplers. No obvious reason If it is covered I'm hoping I can just show them hose. Easy to remove.

I have a large loader being dropped off on my property Wednesday, I have alot of material to move around. After thats done I'll need to get things as smooth as possible without all the whoopdeedoos. Any tips to do this would be appreciated

This may make it easier for you guys. In my opinion the manuals stink

This is gonna be a long thread but in a nutshell what is the dummied down way to figure out if I have x amount of feet to play with how much slope I can expect to have and how much slope is too much slope that a heavy rain will wash it downhill over time? I E I need to know at what point I...

East central florida. Very sandy soil. Ive not seen another that I can recollect. Im looking for a privacy fence that grows very quickly and requires little maintenance. Some sort of dwarf that maybe maxes out at 8 feet and stays full all the way to base. I understand that this prob. Isnt it...

I changed the filter and fluid on my tractor, put in the amount the dealer told me my tractor would take and yet I see nothing on the tiny sight glass, experience has told me this means either it is overfilled or there isnt enough. Experience has also shown me that trying to add to it alone (...

Went to a large show today and picked up some stuff that I couldnt walk away from. First the wheel balancer, I have been looking for a few years but could never find one that I thought was a good deal. I paid 30 dollars for this one and although I know virtually nothing about them I dont think...

Ive seen in the past a metal spring deal with two eyelets on the ends for securing things that required a lot of stretching. My grapple hoses are dragging/just getting in the way, I'm afraid tbey are gonna catch something. Can someone tell me the name for that springy thing that might work.

I was given an IBC Tote that used to store acrylic paint. I've emptied the paint and rinse out the tote the best I could. Someone suggested pouring a couple of boxes of borax into the Container filling it up with water and letting it sit which I did for more than a month. Loose paint remnants...

Kubota L2501 FEL,grapple,backhoe combo It says Bobcat" Standard Quick Hitch and that it Requires 16 GPM Minimum Hydraulic Output From Your Machine To Operate Properly Im trying to consider all possibilities and I really like the idea of the versatility of this unit Water Well Drilling Rig...

Ive scoured the internet and cant find a direct answers. Went back out to the property yesterday and measured my neighbors ( vacant property ) abandoned well. The well casing ( steel ) is just covered by a pot. 62 feet down with a heavy object tied to a string and I am in water which appears...

Im looking at this Lhh Deep Water Well Drilling Rig Machine Water Well Drilling Equipment - Buy Water Well Drilling Equipment,Water Well Drilling Rig Machine,Water Well Drilling Rig Product on Alibaba.com Cost isnt an issue, shipping at more than 5 grand is. Must be a more economical way to...

I understand that chances are slim no one here has any experience with this HowToDrillAWell.com is now DrillAWell.com but I figured I would ask. Ive hand dug down 27 feet on my property in central Florida only to find damp sand. Ive tried in a couple of different places at the same depth. I...

Im doing what I can to research online, lots of different opinions. Im gonna be working on installing approx 2000 feet of 6 ft high chain link. Lots of questions. Terminal posts and line posts, Ive read that for long stretches ( like I have ) I should be setting terminal posts every X feet...

I know nothing about implements, Im not 100% positive a box blade is what Im after but Ive spent enough time on you tube looking at what I can learn to remember seeing a video about box blades. Im gonna post some pics but once again right now Im in a rush to get to work so it will have to...

Im trying to learn what I can about using the trees as an indicator of water source. I have primarily 3 types of dominant trees on my property found in Dunnellon Fl. Pines and Oaks. I have ( or had ) some very large pine trees, some roughly 20 inches + in diam. I understand that these trees...

I need to replace a few items on my tractor that have been damaged such as the step and also the plastic grille insert, also the load level bar deal, is there anywhere I can look up pricing online, obtain some part numbers so that I am able to shop around and make an informed purchase?

I'm having a problem inside the camper I sometimes sleep in over the weekend. Located in central Florida. Don't leave any food out, extremely clean. Lots of rain lately so the insects come inside, scorpions follow. Ants, beetles, scorpion and I've seen one roach. What is gonna keep them out...

Iv started clearing my land for my shop/home. Using the information you guys gave me in this https://www.tractorbynet.com/forums/owning-operating/414484-can-one-you-guys-figure.html highlight= thread I've concluded that clearing an entire acre may be overkill. What I'm after is privacy, I have...

Reading past posts I see people doing more than an oil change at 50 hrs? I read that people are also doing hydraulic filters as an example? Maybe they have hydrostat, my tractor is manual shift. My owners booklet doesn't specify this at 50 hrs? Also I read there are two drain plugs for oil...

Still dont understand how my hour meter works, its showing 30 hrs now, ( maybe its 40, cant remember and not near the machine ) I am sure I havent used the tractor less than 100 hrs so far. Im gonna change the oil, Ive used the tractor hard in my opinion and its time. I know there are alot...

We all have our strong points, mine is not schooling. This is the property Im clearing, Ime at the point where I am gonna start clearing the spot that I intend to use for the home and yard. I dont know any way to figure out where the center of property is ( cause that where I want the house...

I drive my little Tercel to my property cause it's 41 miles per gallon. ( 2hrs away ) I sometimes use it as a truck ( I've got 4 of them and think they are the next best thing to sliced bread ) I remove the seats and it's amazing what I can carry. I'm looking for a plastic 30-50 gallon...

Someone recently told me that my camper on my 5 acres of property is considered a second home and is tax deductible. I'm not the type of person that wants to push any limits I don't live out there I go out there on the weekends sometimes that's it. I'm real unclear on what the laws are and...

I've been told that at one time Florida was under water, that's why there is so much sand,......ok I can accept that but why then is some areas more sandy than others? My vacant property is white sand and nothing but, my home in Brandon is nice black soil, hard to believe they trucked in...

I remember as a kid growing up we had fancy gizmos hanging on the walls that told weather conditions, maybe I'm wrong ( I thought I knew everything I wanted to know about life and didn't care about weather at the time) but I think they measured humidity ECT. I remember being told from childhood...

Someone told me a couple weeks ago that if I was out on my property where there is no cell phone signal that if I dial 911 it would still bounce off some other carriers tower and the call would go through? A local firefighter I was talking to told me this. I have no cell phone signal on my...

I'm new to tractors. I have alot of year's experience working on cars/ light duty trucks. Do you think tractors are more difficult to maintain/repair or much easier? Obviously I feel intimidated by them since I know so little about them. I can say I just did alot of general maintenance work...

I dont want to get up in the middle of night to re-fuel my generator. Im only running the A/C throughout the night. I have a marine fuel tank with an outlet on the top, it has a tube that runs down into the bottom of the tank. Is it possible to use this with my generator even though the...

Not that I buy new ones often but noticed this in past. Go to store, pay 120 dollars for a 5 year warranty battery, bring it home only to find out there is no or very low water in it? Can't even see water in it unless I give it a shake?

I need to build a dolly for my backhoe, it's a couple of hours away unfortunately. Can someone give me some rough dimensions of their dolly. I know some of you guys have built them. We had an old dolly sitting out back that is 20 inches wide by 8 feet long, I'm thinking I can make the backhoe...

Recently bought an L2501 tractor with a FEL and backhoe. Instruction book clearly states that how I treat the tractor in its earliest hour will dictate how it treats me later in my life. Im not sure what that means? I bought the tractor to work, I need the help clearing land, Ive been using a...

Can someone tell me the purpose of the large bolt with the spring in the center as seen in this picture, Id assumed that the center of the rim that comes in contact would be crushed slightly by tightneing the bolt but not in my case, it seems to still be loose on my axle regardless of how much I...

I have factory wheel weights, they are held on with incorrect hardware, makes it difficult to remove as Im assuming the original hardware was a carriage bolt of some type, Ive asked at the dealer, they were not able to find a part number, can anyone offer a suggestion? A standard carriage bolt...

Ill start out by saying I know practically nothing about tractors. I see them on the road on occasion, just curious whats it take to legally drive one down the road and hold up all that traffic? My wife asked me so I told her I would find out

I need a battery for my b6100. E. someone put a car battery in it and while it works fine it doesn't quite fit the tray properly. I've called around to several places and I'm getting very conflicting information. Kubota dealer in Lakeland is telling me that they sell car batteries for...

These directions are unclear. 1- Fill the fuel tank with fuel and open the fuel cock Ok got it 2- twist off the bleeding screws at the top of the filter with two turns. 3- when bubbles disappear from fuel coming out of the plug twist it back on. Okay so is the engine supposed to be running...

My B6100 pep cock clogged, got it unplugged and at first sludge only came out, now it's looking like pure water. How do you guys suggest handling this. I'm a bodyman, not a mechanic per se and so it's better to get opinions from people that know more than I do. Thanks

I'm trying to learn how to maintain my tractor better. I probably haven't done a great job up until now. I believe I was supposed to shut off the fuel when I was done for the day with this tractor. I never did and now the sediment bowl is leaking. I'm assuming that maybe I can make a gasket if...

I hope thats an Ok title, spent the weekend on the property, I went there with a 2.5 glallons of Kubota trans/hydraulic fluid knowing that I needed to add some cause last weekend I had to fix a hydraulic line that had never been tightened properly underneath my backhoe. The owners manual is...

Some months ago I bought a trailer off Craigslist. On the way home with the trailer empty and hooked up to my Ford ranger it started swaying from side to side really bad. So bad I had to stop get out of my truck and scratch my head. I got the trailer home, put new tires on it because the...

Last weekend I was surprised to see that a hydraulic line had not been tightened well enough on my new tractor and fluid was escaping. It was a line down under the BX77 backhoe that was installed. I dont know how much fluid was lost, seems like hydraulics are weaker though now and Im assuming...

I've got 13 hrs on it now but it looks like 30. I need to get it washed, I don't have water on site, I'm working on getting something set up but don't want to half hazardly damage my equipment cause I took chances. I've been doing a lot of research online, in my opinion people do alot of...

To cutting a limb off or damaging something very badly. Im looking for the best you tube video on proper use of a chainsaw. ( any suggestions ) Ive been using them since I was old enough to carry but evidently I need to re think how I use and respect the saw and Ive also been reminded that...

Isn't there a popular set up here on this forum? Can't find a link to the item.

I bought a 275 gallon IBC 275 Gallon IBC Storage Tank Tote - farm & garden - by owner - sale tote this weekend for use on my remote property as a storage container. ( water ) Ill have to bring the water in....no big deal and no choice at this point, no electric and no well yet. Generator gives...

I know there is an ongoing 11 page thread. Can someone cut to the chase and recommend the BEST safety gear that I should be wearing while using the chainsaw. Cost isnt so much an issue as long as we arent talking Nasa kinda stuff. I had a chain break yesterday, caught my left testacle...

I bought a second back up generator this weekend, its an older Onan but it runs well. Of course the add on Craigslist never mentioned the fact that the fuel tank was rusty and the seller didnt say anything until I had already driven the hour to go look at it. Ive called Onan and they say no...

I like the tractor, think I made a wise purchase, this is not a bashing thread but more of a hey I agree but this is what I did to overcome your issue thread. Im prob not gonna think of everything at once, Ill add things as I re remember them and hopefully people will chime in Maybe since Im...

I thought my new tractor was a DT. I didnt realize that is was a HSD until reading this. What is this Shift? Understanding Kubota Transmissions — Humphreys' Outdoor Power Found this whilst looking for answers concerning proper use of my tractor online. I guess the only benefit really over a...

I cant figure out what this is and how it works, says generator? Is it just a part of a generator? Onan Generator Model 28TF-3P/1A 12/24 Volt | eBay

Im gonna have some questions, rather than have 12 different threads Im gonna post them here over time and hope someone will come back and answer them for me. My dealer was supposed to demo the tractor for me on Fri when I picked up but for whatever reason did not do this ( just left with no...

I don't have my tractor yet hopefully picking up next weekend. Kubota l2501 Quick attach/skid steer style front end loader. I want to put something in the hole opening of my grapple to keep the branches and s*** out of my grill and radiator. Is there going to be an issue using 7 mm screws...

I've never financed anything before other than my house, I don't like owing money, I worked 7 days a week 12-14 hrs a day for 2 years to pay that off. My payments though remained the same if I remember correctly. I thought the more you paid the lesser your monthly payments would be? I intend...

Recently I was in the market for a used tractor, I was looking at 1 tractor after another that had a few thousand hrs. on it and major engine work done. That was an exclusive selling point for these sellers, the fact that major engine work had recently been done. I assumed that a tractor's...

Has anyone here ever considered an external power source for running their backhoe? I'm wondering if it's doable and cost affective rather than having their tractor engine revving high all day long just to use that particular attachment. Harbor freight predator engine is cheap, pump might be...

I often drag logs out of the woods using my pole boom attached to my 3 point. Sometimes when I am lowering the 3 point it will drop down just a little then stop, then I have to move the lever back to original position, then move it back to the lowering position and again the 3 point will drop a...

Im wondering why people like ( Im not gonna mention names ) make videos on You tube, whats their incentive? Making these videos takes an incredible amount of time, in my opinion they have given up alot of their privacy, they are exposing and putting at risk their families cause of all the scum...

Im a car/truck guy but I feel alot of interest in these tractors now, how can I find about where I can attend local shows? Ive attended alot of pulls and while I VERY much like this Ive always been more of an original appreciation type guy.....in other words unmodified bare stock just the way...

Im hoping to see it Fri, I know its on its way cause I talked with shipper. Price was the major decider for me, Im gonna get my OEM 3rd function installed by dealer and cover the cost of the attachment for a little less than some of the other higher priced grapples. If the thing looks like...

Kubota tractor Vs. Pine Tree - YouTube

Has anyone here installed any other root grapple other than the wicked? Im sure it a very nice root grapple, Im sure that its prob. better quality than most any root grapple to be found.....its 2 grand. I just spent nearly 30 for my tractor! I can get one alot cheaper online but of course I...

I am gonna pick up my new L2501/loader/backhoe combo in a couple of weeks. Its my first tractor, Ive since learned I need a 3rd function added to run a grapple, I would have thought that the dealer would have tried to sell me everything under the sun including the simonize but no, he even...

Ive already purchased a new tractor, just waiting to go pick it up, its an L2501 Kubota. I bought it cause I already own a B series Kubota and its been a great tractor for as old as it is, I also bought it cause I like Orange and I know kubota is a good tractor that people on this forum and...