Search results

I agree, some have some really great quotes in there. Thanks to both of you. Not sure how I missed that when I looked through that page. Yes, 3-ish lines is plenty IMO. Those that are half a page long, and take more space than their actual response is unnecessary IMO. Yet you were...

Is there a simple way to 'hide' signatures by default? I know I can on a few other forums & I can within TapaTalk. But I cannot see a way to do it via online browsers. Only asking as a good chunk of people have sigs that are a complete novel, lol.

Yes. Had the same issue as you with one of the tires. Replacement them both with solid tires and have been just fine. However, mine came from Ebay and were less than half the price of your Amazon ones. But they were purchased back in 2020.

If you're this close to me, you shouldn't get it. It won't work at all. There, that should free up bandwidth for me!!

If the built in heater fails and it ices over, mines staying that way until the sun melts it off. It's currently mounted on the eve of the second story roofline by the chimney chase. No way I'm climbing up there in the middle of winter. I hate being up there on a sunny summer afternoon.

Have had my 'best effort' plan up and running for almost a month now. Similar location, North Central IN. It'll stream 2 devices at once pretty easily. As for speeds, honestly it's all over the place. 15 MBS one minute, 180 MBS the next. Early mornings ~6 AM are the best speeds. Usually...

This was one of a few determining factors to get the Best Effort plan as well. Add in the fact I won't lose my spot completely is another. Hopefully where I'm at my speeds are not reduced at all. However, I'm curious would would happen if I swap equipment with my parents that have full...

No offense to the OP, but makes me glad I went with the NX series. Third function kit gets installed into a very secure box under the 'passenger' side step area. I'll end up ripping off other lines before anything on the third function breaks. Only issue I've had thus far is the dealer not...

Ah, didn't realize you were talking about metal, thought you were referring to rigid plastic. On a positive note the 2" metal is 19$ cheaper at my Menards, lol.

Gotta ask...where are you seeing $197.00 for a 10' stick of 2" rigid at? Local Menards & Home Depot aren't even above $30 a stick for it around here.

Same situation for me. Cell about 10 miles away is 'available now' where my account states mid-2022 for my order from last July. Curious as to what would happen if I changed my service address to the open cell just to receive the unit. Would they eventually catch on? Go un-noticed and work...

Kinda my thoughts on this as well. I've been on the waitlist since last July for my location. Was supposed to receive it last fall, then spring of 22 now states mid-22. Have a feeling it will go to 23 without any notice at this point. However, the longer it takes Starlink to deliver the...

Sent it to you via private message on 5-16-22.

PM Sent

PM Sent.

Yup. https://www.tractorbynet.com/forums/threads/kioti-workshop-manuals.331259/

However doing it twice (IE the statement of "got two 5 qt jugs of diesel") in the OP's post would equate out to 2.5 gallons as he stated.

Yup. Only mowed area stumps get time wasted grinding them. Anything in the woods just gets cut flush to the ground and called good enough.

Oh not disagreeing with you. He very well may. I just posted the additional information to make sure others that did not need the extension did not buy it.

Only required if the distance from the locking groove on your PTO shaft to the center line of 3PT arms is less than 20". If it's greater than 20" it's not required. I have no issues using the 1P24 on my tractor without the extension kit. Has full motion up/down, tilt in/out with the hydro...

Hell, for our house, the driver could be 24 miles away and Apple Maps would report it as correct. Apple Maps has NEVER taken people to our house upon entry of our address. It ALWAYS takes them 24 miles South East of where we actually live. Google Maps however has been correct even before the...

Very well could be. I haven't had to use my warranty yet (knock on wood), so I wasn't sure. However, after looking at their website it appears they have a 24 month or 1500 hour coverage limit. To me, I'd price a new DK5510 with the options you want just to see how much more it would be to...

Despite having a Kioti myself....how much factory warrant is left with 1100 hours on the clock? Either way, that's A LOT of hours on a 2 year old machine.

Was so happy to see an email from them last night....until I read it. Mid 2022 for me now. ugh. Sadly there really isn't another option outside of jank Wild Blue/Hughes Net. Guess we'll continue using our phone as a hotspot when needed.

Hell, I'm at the point of not caring if the dish looks likes a scrotum, just ship it already, lol. Where I reside the only option for internet is via mobile phone, or that jank Hughes Net.

I have the Baumalight 1P24. LOVE it. Used to hire a guy to come out. While he was cheap, I've probably spent close to a grand with him. the 1P24 has paid for itself several times over and actually made me some money in the 2 years I've had it. At the time of purchase I was debating hard...

Well that certainly sucks. Just checked mine out of curiosity. It still shows mid/late 2021. Hoping it's like next week, lol. Getting tired of paying Dish 115 a month when I could just be downloading everything for way less.

Generally I would agree with this, but even our local Deere dealers are having issues getting parts. Our in town dealer is part of a 8 location group, they currently have parts on backorder for the last 3 months with no ETA for Gators. And not electronic parts, run of the mill brake hubs...

Ah, slightly different than ours here. They'll take straight up take a tree down that is under the lines. They don't care if its 15 foot tall, or 3 feet. Next/over lines is at their discretion. If they can trim it and maintain distance from the lines, they will. But if over 1/3 of the tree...

Power company won't remove the one over the lines? Around here our Co-Op takes care of all that. Land owner has to sign waivers out the booty if they do not want the tree removed saying they'll pay for downed line damage.

We had lightning hit our house a couple years ago. Strike originated at a large Ash tree 20' from the house, down it, and into the LP gas line. Followed the gas line to the house entrance, blew the Hardi siding to pieces there. Ended up taking out the fridge, tv, microwave, and some other...

That it is. His early vids were just straight off the phone camera at times, lol. The latest ones are really nicely edited. Props to him for persisting with it and making his channel what it is. MM2 is...idk. Pretty awesome, but completely and utterly pointless at the same time? At least...

Ah, yes, the infamous 'we walked 20 miles through a snow storm up hill both ways while barefoot' speech. Totally makes sense when both city and rural schools have had buses running routes for how many decades? Or that to walk the 20 miles would take 5+ hours, even more considering it was...

Lol, I've seen a handful of his videos. Some are pretty good (the Hilux series), some are just....ya.

Not to be rude, but unless you live around my area, I wasn't stereotyping, or lumping your kid into the group. As around here (as I originally stated), it is EVERY 16-18 year old high schooler that has a diesel. Go to pick up the daughter or take her to school, every student truck in the...

Never have understood the purpose to putting a 5 gallon bucket as your exhaust tip. All the stupid farm kids and wanna be farmers living in the city around here do it. Just straight up annoying. And yes, I was a kid that had dual exhaust on his pickup truck...but it was just loud, not...

Holy Necro-Post!!

So they know who to round up later??? Why does the gov't have a registry for anything....

Oh I agree, you do get what you pay for. Overall I'm happy with my el cheapo unit. The unit itself didn't fail, it shocked them when instructed to. Just not enough to get their attention, which I'm sure the Dogtra or any other good unit would have no issue with. When we're on our next pup...

Ours is some el cheapo from Amazon ($60 or so). It works... I can ASSURE you of that, lol. She's just stubborn and 'dumb' at times, but a good dog none-the-less. If you have the Dogta one(s) do they really have the range they claim? I remember looking at them, but the $150+ price tag was a...

(3) pails of Shell Rotella HD, $78 a pail before tax, factor in gas to go get it from Napa close pretty close to $300 for it. I guess if you're running the $25 dollar a pail Rural King, TSC hydraulic water fluid you might as well change it every 100 hours though. I prefer to run something not...

Correct. When we're outside doing yard work they are/were on a collar for the fence only. That way they can roam around burn off energy, etc. However, if it's just go out do your business and come back in, they are on a manually controlled one. That way once they are done, we just hit the...

replied to incorrect thread....whoops.

Isn't that the truth, lol. Once they lock onto a squirrel, rabbit, deer there is NO stopping them. I've continuously shocked mine hoping to break the spring and received no response at all.

Pretty sure mine says at 150, 400, then every 400 after that. And it is a hst tractor. And I know the parents Deere 3046 isn't every 100 hours either. 100 hours is like 5-6 months time for me. No way I'm going to do 2-3 hydraulic oil changes a year. $300 a pop in fluid before adding in...

What do you have that states it needs a fluid change every 100 hours? That's just....dumb?

This is what we use and live in a heavy woods. Works great for our (3) dogs. Lab/Pit mix, and (2) Huskies.

Here are the links you need. As said above, they are large. The WM is 400 MB, owners manual is only ~75 MB. If the first link doesn't work, let me know and I'll throw it in my drop box. NX Work Shop Manual NX Owners Manual

Which one are you looking for? I have a few on my work pc I can upload. Unless the links in the other kioti workshop manual thread are still working.

Worth looking into Baumalight as well. They're pretty much identical and closely priced. Might be able to find one in stock as well. I have the 1P24 and it's worth its weight in gold.

Thank you both!! All (3) links worked eventually. And I'm really glad I didn't attempt them on my phone as you're correct in them being massive.

Was anyone able to pull the NX series? Both links do not work for me at this point.

Only in my mid 30's here. But grandfather worked of there for a while for the COE. So I may have seen them at some point but certainly do not recall it. Usually just see UPS/Amazon plans parked out there now. Every once in a while you'll catch Air Force 1 or 2 out there. But now-a-days...

They still fly awfully low IMO. Low enough the A10 pilots will wave at my kids as we're playing outside most evenings.

My stump grinder (baumalight 1P24) is my second favorite attachment after the grapple used to move the trees out of the darn way. I've ground up probably 100-125 stumps in the last 2 years without an issue at all. cut the tree down low so you aren't wasting time grinding more than you have to...

Orange Vanilla Coke?? Sounds HORRIBLE to be honest, lol.

I'm about half way through this show. Typical funny Clarkson. I went into it thinking it would completely dumb and boring, was nice to see it isn't. However, I'm still sitting here waiting to see him race the Lamborghini tractor against something utterly moronic just because he can.

I lost the little bit that was stored within the filter itself and maybe a few more drops.

Put your shopvac on the fill port and you won't lose more than a few drops. That's how I changed my filter in my NX.

Hahaha, me to...from someone else, from a distance as well.

I sure do love mine in 50 Beowulf. Highly, highly impractical but boy does it make a massive fireball and hellacious thud against the steel targets. If that T-Rex from Jurrasic Park ever strolls into my yard, I'll be covered though!

I'll let my wife know before she heads in to run the county's E911 system she's not contributing to the 'public good' as she has no desire to get the shot. Huh... I haven't had a flu vaccine in....shoot, the last time I was in high school and/or college and they made it mandatory. Nor can I...

My thoughts as well on this. Then add in Ohio's stupid 'get a vaccine, be entered to win a million dollars'. Just more 'reasons' made up to entice people to get the needle.

When people started to allow them to mandate how they live their life. I would be perfectly fine with the free money ending. I see no reason to ruin my kids & grandkids futures for a few hundred dollars. There are PLENTY of jobs available for those that were put out of work. Hell, local...

Huh, I resumed activities before this fiasco even started without wearing a mask. Can count on one hand how many times I wore a mask in the last year-ish. Just like my local Menards does. Claim to be vaccinated to get out of their stupid mask policy, they demand to see your card stating...

Same issue for me using TapaTalk, pics hardly ever load. Figured it was just something to do with TapaTalk though as it happens across numerous forums via wifi, or ATT LTE service.

Doh.

We use one the the knock off Mantis style mini tillers in our raised beds. We purchased ours from Menards 5+ years ago when they were clearancing out the garden stuff during winter months. Works well enough. Every other year we get the big tiller out to really till the soil mix. But as you...

Make sure the air valve is at the 12 oclock position. Unless you want the beet juice sprayed everywhere.

I agree with this response. If you're planning on using something that needs constant flow, go with the detent. If you're only going to 'use' the hydraulic power for a split second, go with float (self return). From the sounds of what you're wanting to use, float (self return) will work the...

I think it'll depend which he wants, detent vs float. NXA115 would be for a detent rear remote. Link below for it for $230.00 (I've never bought from this place, just found it via google)...

I'd give Michigan Iron & Equipment a call. You might be able to find it on their website but I've never had good luck using it.

NXA126 should be the part number for the Detent rear remote. I was quoted $297 for it when i purchased my tractor (NX5010 HST Open Station) in the fall of 19.

Following as well, couldn't find it anywhere in the settings either. Pretty sure old system I had it set at 30 or so and make it way easier to read long threads.

I have (4) of these in my 36*48*14. They light it up PLENTY. Really don't need the under loft lights, or upper loft lights unless you really want it bright. 2 Foot LED High Bay Light 22 LM Kit - HB-2MF-165D

Does anyone know which pin is ground and 12v? Trying to wire up a trailer connector to use my 3 point sprayer via the 7 Pin, but none appear to be supplying power. I'm assuming the large pin at 12 o'clock is ground? Either that or I'm missing a fuse that will let the 7 Pin work. The pig tail...

Handle should look like this when all done.

I don't think they do anymore..... I the webmaster email the other day regarding not being able to create an account. The attached picture was the response.

Took some pictures of mine tonight after Meet a the Coach Night for the kids tball, pixie, and baseball.... Tractor is rather dirty from all the mud lately so don't mind that. They are soft lines running from the 3rd function valve to the loader. With regards to my wayyy longer, a few...

While I'm sure you've already looked, but facebook market place is another good spot to search. I've found a few items from there for cheap.

My manual states change the front axle oil at 50 hours. As well as transmission oil filter, HST oil filter, transmission fluid. Then the normal check clutch pedal (doesn't apply to me), and check brake pedal play. I'm with you that it's odd it does want the oil changed at 50 hours on Tier4...

To further the Regular Scheduled Programming..... I wonder when my Wicked 66 will ship as well. I'm getting quite the collection of brush piles amassed that need to be consolidated and burned. Should be down to the last week-ish before the ship notice email comes in.

Weird, mine told me it wasn't possible to have 3 'stock' rear remotes. Despite their being a picture of all three on rear of the tractor. I didn't want to argue or press the issue since I don't really envision using 3 remotes ever.

It's been delivered. Thing is much 'larger' than I recall. And sure is a beast.

Found a YouTube Video that shows this really well. And certainly not something I had thought of yet. I did see the number on LS' website but it didn't even dawn on me just how low this is. Now back to the drawing board on the comparisons as I do a lot of brush stacking.

Good evening, In my quest to find my replacement tractor, I've come up with some questions regarding the LS tractors. I've attempted to Google for the answer but couldn't find anything, went to LS website, but couldn't find the answer there either. The response from my localish dealer was...

Good evening everyone, Few quotations here tonight. 1) Does anyone around the Miami/Cass County area happen to have the 37 or 55 model tractor? I'm currently debating between these two as I compare them between other colored brands. I'm not interested in the backhoe attachment as we have a...