Search results

My ford 1910 like many old tractors turns over rather slowly when cranking. So I was wondering if I replaced the solenoid if it would make it any faster or does the whole starter need to be replaced? Also if a solenoid would make a difference what size and type would I need? Thanks for any help.

Does anyone know of a spin on fuel filter adapter for a ford 1910?

I was a little concerned how to modern loader would look on it, however she sits just right.

Got my westendorf ta-111A installed on my 1986 ford 1910. Pretty pleased with it.

Does anyone know where I can get a replacement shifter knob for my ford 1910? SBA398180210 Is the part number. I already purchased two from wengers however only one came in the mail and it was in fact not the knob they had listed. Any help is appreciated.

I didn’t realize it had a vent

Accident avoided

Is the bolt that I have circled a oil drain for one of these old Kiki diesel injection pumps?

When changing fluids in my ford 1910 does the rear diff have different fluid from the transmission or is it all from the same tank?

I have a ford 1910 with a leaking injection line at the fitting going to the injector, and I’m in need of a replacement. Where could I find one? Part number SBA131506720

I’ve been trying to install a new westendorf loader on my ford 1910 however I can only get the psi above 200 on the diverter block when I put the 3 point hitch lever all the way to the top in the notch area, however once in the notched area the psi will be at 2000. Does anyone have any...

When you say loosen it do you mean to completely loosen or just back it off a few turns?

That’s what I figured

Definitely is better. the original oil in it had some water contamination.

I’ve recently changed my hydraulic fluid and used Delvac tractor fluid however I’m now concerned it may be bad since it is not new holland brand. Has anyone used it or have any knowledge? I used it in my 1986 ford 1910.

Not the return line replaced them recently and they have worked flawlessly

Yes I meant the nut

Ever since I had the fuel filter changed the 3rd injector has been leaking fuel out of the bolt that holds the fuel line to the injector. I have it as tight as it will go and it still has a slight leak how can I stop the leak? Would the plumbing thread tape work?

It had sat for roughly 24 hours

I’ve never changed the hydraulic/ gear oil in my ford 1910 since I’ve gotten it I’m thinking it might have a little water contamination but not sure.

I’ve been trying to find a replacement for this bolt for the front axle of my tractor it’s an m18 bolt however I cannot find one with threads as fine

What are these part

Does anyone know of any good ford tractor junkyards around the US? Preferably close to Tennessee but anywhere will do.

I’m looking for a ford 770 or 770a/b and a ford 7108 front loader. Thank you for your help.

The people at the counter suggested I believe they called it 603030 with some weed killer mixed in it’s also pasture safe so it won’t harm the animals, you spread it about 200 pounds per acre is what they suggested

Stopped by the local co-op to get the fertilizer wagon and a couple thousand pounds of fertilizer for my sheep fields, the little ford took it like a champ.

I’ll take a look, I do believe that westendorf has one that fits a 1910

I saw a ford 770b loader for sale for $4500 I’m think it’s way over priced any idea what would be fair for one with a bucket

What could cause it to fail so soon that pump only has maybe 10 hours on it

I changed the water pump on my ford 1910 this summer I’ve ran the tractor many hours since but when I used it today I noticed a little bit of coolant had leaked out it appears to have come from what I think may be some type of drain but I’m not sure any help would be appreciated

I’m replacing the fuel filter on my tractor and I saw a kit with a new bowl, filter, o-ring for the bowl but then there is a very small o-ring and a spring what is the spring and small o-ring for

I put the original back in it looks brand new

The bowl on my fuel filter housing is leaking after I changed the filter it’s on tight don’t know what would cause it to leak it’s leaking from the threads where it screws on

I have a ford 1910 2wd and I’m wanting a front loader, would it be too much stress on the front axles, I’m not looking to max out lift force trying to pick stuff up just wanting it for some medium to light work

Sounds good thanks for the help

It’s an air hose from the filter box to the manifold

It’s dry rotted just need an exact replacement

I need help finding a comparable air hose I’ve gone to the parts store and they could not find a hose that would work the normal hose they had would not work because it needs a spring inside to keep it from closing up its 3 inch diameter

Mine uses the big cylinder type ones I don’t know of a secondary filter

How would I go about finding the hole or seeing if the filter is seating correctly

I was working on my ford 1910 and had to remove the air filter hose to remove the radiator and I noticed that the inside of the hose, air filter housing after the filter ,and manifold all had a layer of dust I don’t think there is any air leaks and the filter is new is it normal for it to let...

It is gear drive I believe

I have a new filter on the way I’m thinking it’s probably just a really dirty filter

Does anyone know where to find these replacement fuel lines for a ford 1910

It is a ford1910

Today I ran a disc for several hour and on the way back to my barn the tractor would have a loss of power it would be completely normal but when a small hill came the tractor wouldn’t lug down it would just drop rpm’s slowly like you were decreasing the throttle and when you tried to push the...

Thanks for the help

I have a ford 1910 and it needs coolant but I can’t find what type it needs any body know what it might use?

Thanks for the help I appreciate it

The cops now days are out to get people for anything possible

I have a ford 1910 and I had heard about changing the oil in the injection pump I had no idea that was a thing any advice

Good explanation

Oh that makes sense

I’ve always wondered what it is everyone I’ve asked doesn’t really know

I definitely wouldn’t risk it been burnt too many times

I’ll look into those

Yeah, true

That’s a shame sorry for your loss

Bush hogs are super heavy duty

Does anyone know where to find an exact replacement for wheels on a 2wd Ford 1910 I need the front and rear wheels for a restoration

I’ve look at their claw attachments for a skid steer good to know to avoid them

I see titan products everywhere never used one though

Haha

Is there not a drain plug for the oil in the gearbox

Way too big of a fine for something like that

My truck and tractor both run smoother on an additive

Haha

I like to use it for the added lubricants

Definitely

I personally like stannadyne

Lucas is great

Interesting

They put a stick in your tank and it will show if it red or not

It’s great for cleaning carbs

I had heard that it did have more sulfur

Never knew that

I’ll try that

I’ll give that a try

Where’s that found

I’ll have to try that

Definitely interesting

Ill replace that and see if it helps

I’ve only seen pictures of the browns

I’ve seen a few good things about brown haven’t seen one in person before

Never changed the oil in mine probably should do it though

I have a case farmall 95 with a westendorf front loader when I turn the tractor off the loader will leak down completely in a few minutes without load on it it will also leak slowly while while the tractor is on if it’s holding something

Haha

Didn’t know sheer pins were that bad

You think a 32 hp ford could pull that

Thanks for the advice

I figured it would be worth a try

Tractor gets very warm on light work with the correct amount of fluid

Is it safe to put radiator flush liquid to flush my radiator or will it cause problems

The one I had wasn’t rated for what I did so it did not hold up the standards are meant for tall grass only pretty much

Yeah the low end modes cannot hold up for many years

Yeah buy once cry once is the saying for that

I’m looking at a woods they seem to be well built

I have an old 70s model that has held up great through the years

Haven’t heard of Tennessee river before

I’ve heard some good things about the land prides

What brand of rotary cutter have you had the best luck out of or prefer the most

We actually bought our mahindra roxor from Fredrick’s in decatur

I live about an hour south from Columbia

We usually spray and cut low before we plant

A mahindra would be a great choice they’re reliable and I see them all the time around where I live

Where I’m from the soil is a clay and dirt mix usually moist only problems is there’s alot of rocks

We’ve used one before for a few small areas and it did the job well

Favorite thing about the 1000 series is their simplicity

Not sure if it’s any different but on my ford 1910 I thought I had to remove the fan too but I was able to fit it over the fan it was definitely a tight fit though

They would be ok for low speeds definitely wouldn’t go down the highway with them though

I’ve used it to get my lawn mower running better it’s good for cleaning carbs haven’t used it as a oil additive only as a spray can for the intake and a fuel additive

Has anyone on here used a no till planter before and if so how well did it work

It’s definitely no easy job restoring tractors I repainted the hood on mine and it took 40 hours nearly and a lot of learning

Seems like interesting stuff

Good to know

That’s probably a good idea

I mow a lot of fields with fences so a bigger rotary cutter would make it a bit easier

Where Can you find nano borate at

I’ve heard that off road diesel has more sulfur in it but I don’t know enough to know if it’s true

Yeah most of the turf tires are wider than what the rim can do

Everyone who has or is currently restoring your tractor how did it turn out and what problems did you have

The tractors like mine that have turfs have much wider rims I do believe

I’ll look into those

Thanks for the help

I’ve never heard of Naon-Borate before

I’ve never used amsoil additives before but I’ve heard good things about them

I’ve never heard of them before will definitely look into them though

They tend to be hard on my grass when I use my finishing mower

Definitely need more aggressive than turf

I primarily mow with it so I’m leaning toward tires that won’t mess up grass. thanks for the help

I have a small 32hp ford 1910 2wd that I use to bush hog about 15 acres of well kept fields with and use a finishing mower on about 3 acres that is cut weekly. what tires would be best to still give me good traction without being bad on grass? I would like to buy firestones since the originals...

What is the best diesel fuel additive for an old tractor?

Anyone know where to find a roof to fit a ford 1910

I have a ford 1910 and originally I had a 6 ft standard duty bush hog that was bought new with the tractor it weighed too much for the tractor and made the front wheels super light so I switched it for a 5 ft kodiak and it can pick up to the max height without any issues at idle and there’s no...

I am looking into buying a 9125p but I haven’t found where it specifies it’s speed I’m only curious because I have to drive my tractor down the road to get to my different properties

Any one know where I can find new hoses for this bale unroller

Can not believe I did I swore it was the new Holland/ford

Interested to hear other owners opinions and experiences

Awesome paint job did you do it yourself or take it somewhere?

About 5 miles to the south is their restoration facility. It's an awesome place. Better than a Henry Ford original assembly line. They are dedicated to restoring Yanmars and John Deere vintage machines. Sorry to hear that

Just realized fredricks is where I bought my mahindra roxor from had no idea they had a paint booth

I’m currently restoring my tractor and I can only hope it looks half as good

Wow that is an amazing paint job

How many fellow members have repainted their tractor

Thanks I should have no problem pulling it with my tractor then

I’ll have to look into that seems like I’ll have my hands busy for a while with that

I have a Ford 1910 and I have a disc at my farm that requires remotes to lift it however I do not have remotes on my tractor would it be possible to add a rear remote

I live in southern middle Tennessee with decently rocky ground

Thanks I didn’t know I could pull something that big

I have a Ford 1910 and I’m wanting to use a subsoiler to loosen some hard packed soil on my hunting lease would a 1910 be strong enough to pull a single shank?

I have a Ford 1910 and I was curious if it is a fuel pump that you have to change the oil in if it is how do you change the oil

Thanks ive been struggling to figure it out

Hmm you may be on to something

These are what hold the floor boards on the round piece is rubber and it appears to be attached to the metal piece on the side

Does anyone know where to find a hose like this

I forgot all about how it gels up

I’m pretty sure the rating is because biodiesel will eat through rubber hoses most newer vehicles have pretty low ratings

There’s a lot of fords around me a lot less Deere’s but barely any internationals

I think it’s really regional I mainly see fords and Deere’s here in Tennessee but other states it can vary

If I were to use biodiesel in my tractor what are the pros/cons

Is there anyway to get the moisture out and seal the gauges again?

I recently changed the exhaust on my 1910 because the original had rusted off I’ve noticed that it dings like a bell while the tractor is running everything is 100% tight and it has a gasket is there anyway to stop this or is it just normal

I’ve always wondered what the best brand is out of the old international’s,Fords,orJohn Deere

No doubt about that

Good to hear can’t wait to get one of my own

Thanks man I’ve been trying to figure it out

My dad is looking at Ford 6610s and 7610s what are the different between the normal and series two

How well does it clean carbon deposits

Thanks for the response I put some in the oil pan but I was wondering if it’s worth using it in the fuel

Krylon farm implement is very common in gallon jugs in any parts store that I’ve been in usually they will have a krylon brand hardener for it as well

I’m repainting my tractor with krylon farm implement Ford blue does the catalyst hardener actually make a difference

The little fords are work horses

I believe it’s been in good maintenance all it’s life my grandparents were real sticklers about getting anything they had with a motor serviced every year

It was my grandads it set in a side shed and was only used to bush hog his two field twice a year it only has 820 hours

How many hours should I expect to get out of my Ford 1910

That’s true

I have a Ford 1910 with a 1.7 3 cylinder and I was wondering if you could put the turbo from a John Deere 1050 on it since they are comparable motors

I tried using the rust oleum farm implement paint and it is junk it has very little strength against anything I’ll definitely look for the valspar paint

I’m repainting my Ford 1910 and I’m wanting to know what the best high quality paint is

Is it possible to increase the power on a tractor?if so what’s the best way to do it

I believe mine is the semi synchronized

I’m wanting to know which transmission my Ford 1910 has there’s two types a synchromesh transmission and a non synchronized how do I need to check

I’ve ran some Stanadyne performance injector cleaner on it

From what I’ve seen some 1910s came with weights so I believe the ones I ordered should be enough to hold it down

You can drive around in it pretty easily but if you hit small bumps it will cause the front to ride up on it

My Ford 1910 is very light in the front with the 5 foot bush hog on it I ordered 5 50 pound weights that are the same as the originals will that be enough to make a difference

It’s definitely been a great tractor so far I’ve already gotten the shop manuel and the owners manual

It’s an original it was my grandpas he bought it new in 86 and only used it to bush hog their two fields twice a year

I’ll look into that

Does anyone know where to find a white roof for a Ford 1910

I’ve gotten a Ford 1910 recently and I would like to know what all I should check and replace to restore it back to it’s original power and condition it only has 820 original hours on it.the only part I’ve replaced on it is a seal on the hydraulic piston which made a huge difference on the...

Thanks for the help I appreciate it

I’ve recently come across one of these Taylor 5 row planters and I can’t wait to use it does anyone have any tips for it

It’s good to hear that it holds up can’t wait to get the shine back on my Ford

Ive used some of the spray cans on a few small parts and I’m really pleased with it

Has anyone used any Ford blue rust oleum farm implement paint I’m wanting to repaint my tractor and I’m wonder if it’s worth using

I’ll try that

Thanks man that’s actually very helpful I’ve been looking everywhere are you able to remove the studs

Has anyone used sea foam in the engine oil of a tractor

It’s about 3 inches wide and 1tall