Search results

why would you want to attach a slide hammer? Remove that seal and then take the nut loose!

We have replace several shift forks in the DK45s over the years...That in my opinion is just a Band-Aid.... The last 2 I did I fixed it right!! Of coarse that again is just my opinion. The problem that I seen with the set up is, the shaft coming from the forward/reverse lever down through the...

Ran long enough to ruin the motor.

Why is this anymore riskier than shoving your loader into a bank or a pile of dirt? You dont put equal pressure on the loader arms when pushing into a pile? I have plowed for 10 years with a loader mounted plow. My first was a 30hp Cub Cadet with a Meyer 7-1/2' plow and now this one. This is a...

Keep in mind that they may also be looking at yours! Not just our dealer lots!!! The following notice has been reported to NEDA from a Member/Dealer: From: PSP Watch Center SP - Strabane Police Date: 04/09/12 Statewide - Auto Theft Ring: As per BCI Western Auto Theft Task Force -...

Woods does not list a mount for the Bobcat CT225. You have to use the mount for a Kioti CK25,CK27,CK30,CK35 Same mount, bolts right up!

I would say take a closer look at the Bobcat! Its powered by a Yanmar diesel, comes standard with power steering.

Well this may help all your questions..... Now for the BIG ISSUE..Got a call from my rep today, seems there is a very limited supply of max 22's I received 1 max 22 and 1 max 28XL I took about 10-15 pictures in the areas that differ the most. I am not going to post all the pictures on here. If...

Hmmmmm.

I would be all over doing this! I love to fabricate! If I was so busy doing this!

Make sure you did not shear off the roll pin.#21 If I am reading your post correctly, I am thinking something got jamed up in there and forced the lever hard enough to bend the bracket for the micro switch. You also mentioned you had to tap the lever (#20?) back onto the shaft #16?. That really...

This is just a orange paint job.

What number you need?

Looking for a very low hour JD 4300 hst 4wd mid mower and loader a plus! Will travel anywhere if the deal is right. CASH IN HAND! Send pictures to rwallacetractor@echoes

No disrespect taken. Okay so $6,000 installed with remote valve. See just like Staples! $1,000 savings :licking: Need it financed? I'm sure we can do that also!

Bobcat 3400 w/yanmar diesel

Here is one thats I can appreciate. My mother in-law is a survivor of Brest cancer.

Wonder why Deadong wants to keep re badging all of their product? Seems if they would keep some kind of exclusiveness, the product would yield better profits?

Looking at all his past posts, sure looks like you Kioti owners now have a inside Kioti person on the forum.

I just received this...This is in northeast Pa Subject: Scott Twp Theft of Kubota RTV's Scott Twp PD Chief Ray KLINGLER reported to me for immediate dispursal to other officers & agencies the overnight theft of seven (7) Kubota RTVç—´ valued at $14,500 each, four RTVç—´ were...

That's Funny....They sent me one! Sorry, Too late!

and get rid of the real good ones!

You need to start reading between the lines of the BS your Kioti rep is filling you with. Why did Daedong sign contracts with Bobcat in the first place? Because Kioti sales were week and Daedong needed to sell equipment. Why is Daedong signing contracts with McCormick? Because between Bobcat...

Unless things have changed at Kioti there are no parts available. You have to buy it complete. Get ready for one heck of a bill. I would remove the steering pump/motor and pull the shaft. Take the shaft to a machine shop and see what they say. You may also want to check with Kubota. I quite sure...

Sounds okay....You may want to do something soon as Kioti is having a price increase. Or maybe you may want to jump on my deal.:D Bobcat 445hydro w/loader and a new 10k Bri-Mar equipment trailer. You come pick it up and I will do the package for $25,750:licking:

Not exactely...This is a self centering rocker switch that will allow you to do all 3 function at one time if your that tallanted!:laughing:

Here's a couple small loads on my F450....

This tractor is a little fire cracker...We sell a boat load of these a year! The 1816 replace the 1815.

Hey guys I have a 440,445,& 450hst tractors w/loaders and R4 tires. These machine are brand new and I have to move em out!:licking: I will also add anything you need such as backhoes, 3pt attachments....etc... I will not email or quote out on paper. phone calls only! These are for pick up only...

This blade set up is made to fit Bobcats new quick hitch set up for the front mounted attachments. The hitch is designed to use the front mounted snow blower and this new plow. There will also be a front mounted broom available in the future. I received a phone call from someone at BC, they...

Well... They sure can make the hp!

I just don't understand why Kioti would allow Daedong to do this again. I'm talking about allowing Daedong to sell yet another color Kioti. I remember back when Kioti announced to us that Bobcat was going to get "our" tractors. And now this. Man am I glad I am not sitting in North Carolina right...

Well I might as well offer it....Anyone looking for a front mount snowblower for your Kioti. You just may be able to pay for it with this storm:drool:. We can even give you financing.:)

Check out the new Mahindra 3616 cab. It will blow the doors off the Kubota!

Man I thought we were going to get the big one!!:mad: Looks like it will be just a dusting or so!! CRAP!!!:mad::(

I might be able to save you a bunch of hassel... I can sell you this one. All you will have to do is put your holes where you want. $475 to your door!

Here's one more of mine! Believe it or not it is actually a 15 year old doing manual labor! Please don't feel bad for him...He is only on his second machine...after he gets to the 30-40th machine I will let him jump in the cab tractor and plow so more snow:D.

First off let me say, you are getting a VERY good price on that blade! I would jump on this quicker than........... I only stock the 60"HD and it is a very well built blade. I have a picture of the blade which we mounted on a Mahindra for a customer...

My wife is selling here Mega Cab. 2007.5 Dodge 3500 Mega Cab Laramie Cummins 6.7 Diesel Auto 4wd 3" suspension lift 20" wheels 35" tires 29k turbo spray in liner factory dvd engine brake $35,000 You can pm or call me.

Guys nows the time to go out and get the front mount snow blowers or a backhoe. Bobcat is offering 0% financing for 2 years on any attachments over 3K:licking:

Mike can you email me pictures and asking price? rwallacetractor@echoes.net Thanks

Okay so who wants the bragging rights??? Anyone want to try a front mount blower? Pm me for pricing and shipping. I have 2 62" in stock for the 25-35 hp and 2 72" for the 38 and up hp's

We checked out our sales last year, with out any special sales our numbers were way up. So here it is!

Hey guys does anyone go shopping for tractors on Black Friday hoping to get a great deal?

Guys I have a repoed DK55Cab Tractor that I will be selling off here shortly I will be posting pictures and details on my web page tomorrow. Feel free to Pm or email me with any questions.

Guys, just tell me when you want me to chime in here.

I am a Carry On dealer. With that being said Carry On is a entry level trailer. (you get what you pay for) They make a decent cheep trailer. If your looking to haul across country get a higher end trailer such as a Car Mate or Wells Cargo. You may also want to look into getting torque flex axles...

It seems as the suspension is softer and responds quicker. It also has a larger seat bottom that seems to come out under your legs for better support..

I am now offering a block heater kit for those of you who have wanted one for your machine. Go to Wallace Tractor and Equipment NEPA Compact Tractors Lake Ariel Poconos Honesdale PA and scroll down till you see the advertisement.:thumbsup:

Here's one of mine...

The front tire size is not the same as a turf. They run a 18x8.50 10 they are a really low profile tire. Simplicity is not putting the Carlie tire on the Legacy anymore. They are using a Kenda.

Here's my new one! Actually it's my sons new birthday present.:thumbsup: I also have a 60" power angle blade coming!:licking:

How about this Bri-Mar 18' 7K for $2,900 (these are usually 3,595 but I need to make room for winter!) This is one of the top made trailer manufactures out there today. Has brakes on all wheels. 5' stand up ramps with dog legs. This is one of our best selling equipment trailers out there.

Hmmm... sounds like your getting off cheaper than I did! My daughter just got her new 2011 Suzuki Kizashi last night. My daughter is currently holding 3 jobs and make good money for a 17 year old yes a 17 year old that works! My wife and I gave her the down payment as her 18th birthday is next...

You bet we have one. I'm to fat to lay on the floor!:cool:

I'm interested in it. I sent you a pm

They are aprox $350 You drill 2 holes in trhe side wall of the bucket. It uses 2 bolts to hold the cutting edge on.

Here's a couple of shots of one..

WE just got done hanging this on...Wow now I can't wait for the snow! It's does look like we will be able to bolt one of these right on to the orange machines!

Been there done that :o... I quoted out a cab tractor at a rops tractor price. The customer did not buy from me as he said my price was a little to high for their budget. But on the flip side I had a cocky Harley salesmens make a statement to me one day... I bought my wife a new Harley and I...

Here's mine pulls a 10 and 20k equipment trailer. It also pulls a 18k 5th wheel rv.

Big dealers??? How much bigger?

Hey check me out!!!! These are stock photos not the actually trailer. I just got a 18" all steel deck car hauler in. Bri-Mar has a gradual tapered beaver tail and they also have fabricated ramps. THEY ARE NOT THE ANGLE RAMPS THAT ARE PRONE TO BEND. Bri-Mar does manufacture a higher quality...

What are ya looking to get for the pkg?

Guys I have some demoed Bobcats They will all be sold as new with full warranties. Manufactures incentive programs also apply. I have a CT450hst, 2 CT122 one with a loader and mid mower and one with a loader. Call or pm me if interested.

Soo.. lets see Bobcat had them made by Club Car and Husqvarna is currently having them made and now Case?? Like to see what the price differance is. I am selling the HUV for $7,999

Once you get a 35lb drum of grease in there you should start to see it come out..... Okay so let me explain what is going on...That grease fitting is to be able to get grease to the top of the spindle bearings and gears. The lower will be taken care of by the front axel fluid. If you look at the...

ME TOO!!!

They all break no matter how old, new, or how much you pay for them they all break!

How about something like this for $3,895:D 10k 18' 5' hd ramps

THEY'RE HERE!!!! We got white tractors!!!!!:D Just received some shiny new Bobcats this morning, with several more loads to follow over the next couple of weeks!!! It's like Christmas morning!:p

This has been one of the hardest weeks Amy and I have ever faced. We have had sleepless nights and tearful days.... There is really no other way to say it so please accept our sincere apologies and also our many THANKS to everyone that has supported us over the years. Well after 7 years of...

Lookig for something like this?

I have 2 of these 2008 DooLittle dump trailers left and I will be selling them for $2,999 You will get benifits of being able to run them on the road and yet they are small enought to get around your yard behind a tractor. They have their own hydraulics. They are 6x8 3,500 lbs with brakes

Where is everyone I need to sell tractors!!! Come on...Let make a deal. If you guys have a way of picking up a machine here at my place I am going to make some good deals! I NEED TO SELL TRACTORS! Who wants to be the first!:licking:

I have a 72" one here that is a snow/dirt blade. There are 2 bolts that you take out and the spring trip will work for snow pushing or you leave them in and now you have a dozer blade. It is a manual angle or you can add the hydraulic cylinder kit down the road, $1,900 manual $2,300 power angle...

Guess it's not really a model...it's just a Sims cab No it won't fit yours it's for a larger chassie.

Guys I got a Sims cab that we never sold I would like to move it. It will fit a Mahindra 2615 2816 & 3015 it will also fit the cub 7305 and I think the other cub model # is 7265 Anyway Pm if interested

Be careful you don't bump the switch on..You will dead head the hydraulics and burn up your pump. You can get a angle switch from a Meyer plow and that has a return to center. How about one of these handles for $79.00 plus shipping

#4 is the relief Not sure if this is your valve or not..

Get the newer style decal:D They are only $12.95 per side

Here is my little girl! Jazzie she is a JUG My kids tell me I love the dog more than them?:rolleyes: Ya and?

Just a quick glimpse at what's coming down the pike!!!

No it will not be in the 401 loader manual it is part of the tractor.. Generally what happens is the ball pops out of the socket. It usually will still work but like you said it is not in the correct position. You will need a new cinematic kit. It will set you back $29.65 plus shipping If you...

The service manual does not show stuff like this This is what's in the parts manual.

If you go to my web page you will find filter kits on there if you order a complete filter kit I will give ya free shipping. Or you can pick and chose what you want and add them to a shopping cart and pay via pay pal. If that's not for you feel free to call and speak to Ryan, Amy or Marc and...

Hey..... I got 0% for 72 months on orange tractors

Guys things are slow so we are in the clean up/clean out stages... If ya need anything or want anything let us know and we will see what kind of deal we can make. I have a boat load of grill guards for the CK series tractors...$125 shipped!

Wow where is all of our snow?? I am sitting here with close to 50 snowblowers and no snow!!! Well looks like some poeple are going to get some killer deals on walk behind snow blowers.

NO! See that's the problem with everyone.....THIS IS AMERICA!!!!! WE DON"T MONEY!! YOUR PRE APPROVED!!! And don't worrie about the trailer we sell them too.....

No worries?!?

I am going down to Wendel NC the second week of FEB I will bring you one of these for $2,500 This is a brand new 2009 DOOLITTLE landscape 16' 7,000lbs It has a 5' reinforced mesh ramp and brakes on every wheel.

Sorry about the last picture...I know this is a Kioti but it will give ya a reference on what they look like. The olnly thing you would have to do is build a mount because this is built for the Kioti. Unless I can get my hand on a Bobcat.

Guys I need to know if someone can tell me which way their CK20 Mid PTO spins. Sitting on the seat does the shaft spin clockwise or counterclock wise? Please don't beat me on this question ya know how long it has been since we sold a Ck20 with a mid pto on it.:o

Snow?? What's that.... We were cleaning up the yard and because of having a self storage business also we can't just plow snow we have to move snow! Yes in the middle to end of the snow season we open up a ski resort cause we have mountains bigger than most ski resorts!:p We plow into a pile...

Okay so this is what happens when we get slow and I can't sleep at night:p

Here ya go...:D

HAPPY NEW YEAR TO ALL!!!

HAPPY NEW YEAR TO ALL!!!

HAPPY NEW YEAR TO ALL!!!

It is the whole thing

I know it's not your color but here is my snow machine!!

Okay if you been on the fence about buying a new Massey. Time is now! We have the GC and 1500 series that we will be selling at CRAZY prices! Massey just came in and said move your inventory and gave us additional discounts to get it out before the end of the year. Please if you are going to...

I know how everyone like pictures...He is one we just completed.

End of the year and MF has the best programs ever! They want use to push till the end of the year! So I'm ready when your are:D

GUYS I GOT A REPOED MAHINDRA 3316 SHUTTLE W/LOADER HERE IF ANYONE IS LOOKING FOR A GOOD DEAL. ONLY HAS 78 HOURS:eek: PM ME FOR INFO

#9 is the bolts that usually come loose.

Any in need of a cool snow machine! Full power angle! We even have mounts for Kubota and Polaris

Someone is going to get a SMOKEN!! deal!:eek:

I to couldn't wait...They may not say Kioti but at least I can keep my customers and maybe gain a few more!

All done and works perfect!

Anyone running a Blizzard snow plow on their UTV? We are in the process of installing one on our Husqvarna UTV I will post some pictures once it's done.

The couple I have right now are gas but they also come in diesel. They also have a family truxster!

Check these out.. It is a Husqvarna.

Here is a better picture for ya..

I had a 1999 Cub Cadet 7305 which was a Mit. clone to the Mahindra used it right up until last winter when I sold it to one of my employies and at the time of the sale it has just over 1,400 hours on it now it has close to 1,800 hours and survived this....(see picture below) I NEVER had a...

I can' wait any longer so I ordered 10 Husqvarna HUV'S and look they even come in ORANGE!

Anyone notice the new CK20 that was in the little boys room?

I'll try again

I seen it before.. If you ask me I would say that the hst charge pump steel pipe o-rings are leaking.

No it looked like this.

Maybe this will help some of you guys out...

Why not get one of these?

Looks Like BobCat is done unloading their inventory. Had a customer come in for a CK30 today and he told me I was cheaper than the Bobcat!!!:eek::eek: SO let the selling begin!!! again!

I have some DooLittle Extreme skidsteer trailers they are not the top of the line but I have sold aprox 20 of them this year already. Check this one out.. This is a 18 foot long 16' flat 2' beavertail 82 " between wheel well Bolt on fenders (incase you damage one there is not cutting and...

Does it look something like this??

Okay enough already!!!!! Your starting to make us jealous. Your just lucky I have Mrs. Tractor or I would be moving in on your claim! Ya and on another note that picture of her on a tractor with heels!

JUST PAY ATTENTION TO THE DATE, IT'S THIS SAT THE 6TH NOT THE 7th

Hey guys I have some CK series grill guards I am selling off if anyone is interested they are $125.00 plus shipping. Or you can pick them up on June 6th:D

One of the most important tools for you to have on your Kioti tractor is... :D:D:D

I am quit sure that the tym backhoe is the same exact as the Kioti. Would you be interested in just buying a new Kioti subframe and just bolting it on? If so I can price it out to you.

Usually rod 1 needs to be adjusted.

Okay guys and girls I just got in 2 DK40SE hydros that were from a dealer close out. These machines have approx 20-30 hours on them there is some paint fade and some imperfections here and there. These machines will be sold as brand new tractor with full Kioti warranties. Both machines are...

I built 2 tractor for a local gas company to do their mowing with. The whole underside is 1/4" plated steel, it has a 12,000lb winch that can be used on the front or the back...and yes it has been used already!

Here is one of my customers...

They are only about $6-7 for new ones.

Okay why are you sucking up what did you break now?? Stop your making me :o No wait keep going...

Here is one of the first accessories I plan on offering for the Kioti UTV. I will also have a v box spreader available....Details to follow.

The CK was a smaller chassie. The DK has the standard quick tach 66" bucket and one set of remotes standard. The CK will not do the round bails. This is a CK series. This is the DK35

Guys check it out the loader is on... As a matter in fact the new owner waited as we finished up...we didn't even get to wash the machine he took it right out of my hands:(!;) Wish I can run across a couple hundred more deals like this one I would be able to reduce my bail out: Thanks Max:)

It can be yours..Amy said I can not get attached.:( This was a proto type and don't ask me why they never went thru with it but it would have been a Kubota killer if they did. It is brand new (2003?)and yes I will be selling it. It has a power shuttle and a glide shift trans. We are getting...

Just released.. Buy any new CK 20,25,27,30,35 and receive a free KL120, KL130 AND NOW BUY A DK35SE, DK40SE, DK45SE and receive a free KL351, KL401 loader for free!!! That is get a free loader in lieu of financing.

Knock off...I don't know what your talking about...hey want to see our new economy line of tractors????

Here is the specs keep in mind this is a proto type..

Here is more pics...

Okay start drooling........;)

No the function that I am talking about has nothing to do with the rear remotes..This one gets plumbed into the power beyond of the loader valve and you run 2 new hydraulic hoses up to the front of the loader. Don't pay any attention to the wire that something different.

Sounds like the fuel shut off solenoid is not working. That is #20 it has a plunger that moves in and out.

Well guys next time I hear the comment "I should have bought a name brand tractor" I will stick this post in their face. Here's my story...AS most of you guys know I bought a new "delivery truck". well I loaded a DK65 cab tractor up last night and headed west to help another dealer out, we...

QUOTE=WarrenF;1580713]ROTFLMBO.....:D:D Okay so for those of you that don't know what ROTFLMBO means.. I asked my 16 year old daughter and she told me well in short it means this..

I am feeling nauseous

Ahh crap! You mean I can't start to reduce my bailout!

Just trying to put the facts in perspective.

It looks just like these

Just thought you guys may want to drool over this,:p take note on how much larger the bucket is. Before anyone asks the quick attach addapter and bucket are not yet available through Kioti, the only way we can get them is by ordering a loader package. Or you can just come buy a new...

Nope it looks like this!:D It's 8-1/2 foot snoway v plow and man does it make short work cleaning up our storage lot!

At about 3:00pm on Jan 1 2009 Brokermike took delivery of his new DK40SE hydro. Thanks for the business Mike and may you have many hours of fun. By the way Mike, Amy and I got a kick out of your mini log skidder(Rubert) You have to post a picture for everyone to see.

The DK series bracket won't even come close to working. I sell the quick tach (tractor side) for $549 and the bucket side for $159

If you have been waiting to buy a new Kioti now would be the best time! After the first of the new year we will not have our 0% for 72 anymore, so if three was ever a good time to buy now would be it.

MY wife makes fun of me when I ride my sons 90cc quad...glad to see I'm not the only clown around town!

Well lets just hope I am way wrong about this... I just got a fax from Agricredit (financers of Kioti products and many other brands of equipment) and rates went up :eek: like you wouldn't believe..used equipment was apox 8.5-9.5% Now they are up over 11%. Okay so now you woundering what this...

Well were loaded....2 customers will be getting early Christmas presents! Sorry about the pictures but we just got done loading. I will get a better picture tomorrow.

QUOTE=Dodgeram;1537633]I slept at a Holiday Inn Express about 3 years ago...Bought a Kioti the next day:) Nice truck Rick, and you will be happy to know I got rid of the Dodge (broke my heart). We got rid of the 5th wheel TT and bought a motorhome, so we didn't need all that pulling power. Tom

So who wants to be the first one for me to show up with their new Kioti driving this:D? I thought we were giving good deals out on tractors... Bought a F450 cheaper than my 2004 Chevy back in 2004, :eek:lower interest rate and lower payments by over $100 bucks!

Okay after tons of research and a couple trips to the dealer here it is.. My new F450 I will be picking it up Friday!:D Here is what I am replacing, This was my dream truck back in 04. It only has 55k on it. Main reason for getting rid of it is taxes. This truck was great in everyway. If...

Cool but I make it eaiser...tell me how you want it and I will build it!

Customer called me and told me that he wanted to take the time to tell me that he really appericiated the time I spent with him but he decided to buy the Bobcat. He told me that the main reason for buying it was the fact it had a Kubota engine in it:eek: I asked him where he got that info from...

Knowing that GM is ever so close to filing backruptcy would you still buy a new truck?

Let me know if you need more than this?

Here is another:)

Here's one of mine with your new dump trailer on it!

Sorry I made you wait so long!! Disregard the Mahindra logo this is not a Mahindra!

Just a little heads up there is no Turbo 50 matter in fact there is no 50 right now. The largest hp hydro cab is the DK45SE. I will dig for some picture of the inside for you. Better yet make a drive down to Pa and you can take all the pictures you want:D you can even take the tractor home with...

Here is one 1 of 2 tractors I did for my customer.

Hey guys and girls.. Kioti is going to give you a free loader with the purchase of ANY new CK series tractor.:eek: Good thru Nov. Remember this is a cash deal only or standard rate financing. We have an operator standing to handle all your calls:D

Builder, I can help support your parts needs for your new purchase if needed.

Ya baby!!!! LET IT SNOW!!!!:D:p:D:p calling for 3-6 but we already have 8 and still snowing! whoohooo!:D

Hey Guys I need some keys for one of my customers Mitsubishi tractor, any one know a good dealer or a source for the keys? Thanks

What other red ones:D Ohh..you mean these ones!:p

Or maybe pick from one of many(TO MANY if you ask Amy!)tractors on my lot!!!

How about one of these instead of the 40 or 45 cab?

Sorry guys I just didn't post any because I wasn't ready for the mad rush:D

:eek: My customer only had it for 2 weeks. Ran up on the brush pile and over it went. No one got hurt well maybe just his pride

Mark we just finished up with the second one now we can start on yours...Just send me a $25,000 deposit and you should have it in about 3-4 weeks!:D

That is a rotary cutter (brush hog as some might call it) and a SE4 is a 48" cut. It is also missing some brackets for the top link as stated. The cutter has been discontinued but rhino is ver good about parts. To answere your question yes your CK20 will run it.

I am going toward Atlanta Georgia late this week and if anyone wants a new tractor along my route I will deliver it for free.

I am going toward Atlanta Georgia late this week and if anyone wants a new tractor along my route I will deliver it for free.

Haa caught you!:eek: Now you have to be nice to me!:D If I tell your wife what you are doing with HER rocks I am sure she will be inviting me back up to your house to give her lesson on how to run the backhoe to dig your grave!;) Mark you know eventually you will have to turn the tractor off...

I heard Bobcat was coming out with a mid mount mower for the new compact tractors, has anyone else heard or seen one?

It is pretty easy no real tricks. There was an update put out about 3 years ago on this. The steering bump stops were located on the wrong side of the axle and need to be moved to the opposite side..the only problem is I can't remember what side they are suppose to be on. Make sure when you get...