Tractor pictures

[dcyrilc]

Here's a few pictures of my CK25HST with my home built cab.

WOW! Beautiful workmanship.

 

[DEON]

Beautiful!! Is aftermarket AC available for that??

Ha, I don't know if I can build an AC unit. It would take lots of studying.

 

[dcyrilc]

Here's a few pictures of my CK25HST with my home built cab.

Any chance you did a thread on the build?

 

[mjncad]

Ha, I don't know if I can build an AC unit. It would take lots of studying.

I'll bet you could piece one together from odds and ends from small cars. Maybe an underpowered Geo Metro or a squashed Smart car would be a good donor.

 

[Tongy]

My new (to me) used MF 1540. Replaces a Ford Jubilee that I had for 31 years. Having a FEL is great, so many uses, so many things you can do with it.

Not sure if this pic will post.


100_0187.JPG

 

[WilliamBos]

My new (to me) used MF 1540. Replaces a Ford Jubilee that I had for 31 years. Having a FEL is great, so many uses, so many things you can do with it.

Not sure if this pic will post.


100_0187.JPG

No, it did not post.

Hydro, or Powershuttle??

 

[rtdiggr]

Here's a few pictures of my CK25HST with my home built cab.

Very Impressive.


Shane

 

[Johndeere3720]

I finally added an SMV sign to my tractor last night. there is a before and after picture. I almost bought some flashing lights for the tractor but I didnt have enough money with me to get some. (i keep it all in my account so I dont spend it all at once) Atleast with the SMV sign, people can see me working. Havent been able to use the tractor lately though since it has been to cold to mess around in the woods. Still waiting for the snow. I did remove anything I could from my implements so they wouldnt rust in the rain. I got my teeth of the boxblade, some pins, and some extra imatch bushings. Now I just need to get a tool box mounted on to the yanny.

 

[WilliamBos]

I finally added an SMV sign to my tractor last night. there is a before and after picture. I almost bought some flashing lights for the tractor but I didnt have enough money with me to get some. (i keep it all in my account so I dont spend it all at once) Atleast with the SMV sign, people can see me working. Havent been able to use the tractor lately though since it has been to cold to mess around in the woods. Still waiting for the snow. I did remove anything I could from my implements so they wouldnt rust in the rain. I got my teeth of the boxblade, some pins, and some extra imatch bushings. Now I just need to get a tool box mounted on to the yanny.

Excellent addition. That alone can be a life saver. Keep up the good work.

 

[Johndeere3720]

Here is the stuff I brought in.... now my implements are winter ready.

 

[Johndeere3720]

Well i cant say my dog was to fond of the hat or the tractor, I atleast got the picture. The only way to get her to look at the camera is say "kitty" which for some reason gets her to get excited and look at you. I figured I'd get her a nice bone for christmas this year.

 

[Farmer John]

My MF 3165

 

[Johndeere3720]

I dont have pictures yet but im getting my 3rd tractor soon. Its a JohnDeere 4100 with a FEL and rototiller. It is FREE! It was in the neighbors mancave that burned down so I shall have a project. You may be wondering and yes, he had insurance and is getting a Kubota with a FEL and Backhoe next week to replace his John Deere. Im just so excited to start working on the Deere. In fact, I was the last one to drive it before it was in the fire. I plan to be the first to drive it after the rebuild. I dont know when i'll get it since the fire is still under investigation but when he starts to clear thr place out, The Deere is goin up to my place as my highschool project tractor. Pictures will come when he starts to clean up the place. Wish me luck!

 

[WilliamBos]

I dont have pictures yet but im getting my 3rd tractor soon. Its a JohnDeere 4100 with a FEL and rototiller. It is FREE! It was in the neighbors mancave that burned down so I shall have a project. You may be wondering and yes, he had insurance and is getting a Kubota with a FEL and Backhoe next week to replace his John Deere. Im just so excited to start working on the Deere. In fact, I was the last one to drive it before it was in the fire. I plan to be the first to drive it after the rebuild. I dont know when i'll get it since the fire is still under investigation but when he starts to clear thr place out, The Deere is goin up to my place as my highschool project tractor. Pictures will come when he starts to clean up the place. Wish me luck!

Great!! you can start a thread here. Did you the the JD 4300 rebuild thread? Is it hydro or gear?

Congrats and good luck.

 

[Johndeere3720]

I did in fact read the 4300 rebuild thread. every page of it. The 4100 is a Gear model. The hardest part of fixing it will probably be the wiring. Im pretty sure that the tranny has an "H" pattern and the middle is neutral. My neighbor is getting a 2007 kubota next week so I want to remove the implements before i drag it up onto the trailer in neutral. It will be hard removing the FEL. I will unhook the tiller and haul it home on my forks on my Yanmar. We dont have a shop yet so I plan to fix the implements first so when the tractor is finished I can hook up to them and go. I just cant wait. Then when its fixed, my step dad and I will have to flip a coin to see who gets to drive which tractor for snow removal. I will add the 4100 to my signature when I get it home. One question I have, it has an Agric rototiller on it, is it hard to get parts for those as ive been having a hard time searching for them on google. I know that my local Deere dealer will love my buissiness in their parts department. They know me pretty well.

 

[WilliamBos]

I did in fact read the 4300 rebuild thread. every page of it. The 4100 is a Gear model. The hardest part of fixing it will probably be the wiring. Im pretty sure that the tranny has an "H" pattern and the middle is neutral. My neighbor is getting a 2007 kubota next week so I want to remove the implements before i drag it up onto the trailer in neutral. It will be hard removing the FEL. I will unhook the tiller and haul it home on my forks on my Yanmar. We dont have a shop yet so I plan to fix the implements first so when the tractor is finished I can hook up to them and go. I just cant wait. Then when its fixed, my step dad and I will have to flip a coin to see who gets to drive which tractor for snow removal. I will add the 4100 to my signature when I get it home. One question I have, it has an Agric rototiller on it, is it hard to get parts for those as ive been having a hard time searching for them on google. I know that my local Deere dealer will love my buissiness in their parts department. They know me pretty well.

Here you go.

webpagetemplate

index

If it opens in Spanish, look for the little UK flag on the left side of the page.

 

[tugboat-2]

CONGRATULATIONS Jake !!! You are fast becoming a young "Fleet Owner" with a variety of makes and models for a great education in tractor mechanics. The idea of a "School-Project" excites me. Good for you !!

Is the burnt John Deere badley damaged? (I'm thinking "heat" distortion etc). A few photos will help when you are eventually able to get some.

Very best wishes for a Merry Christmas to you and your family!! I guess your folks will never, ever be stumped as to what category of gift to get you huh?

CHEERS! . . . and take care young fella !
. . tug

 

[JDGreenGrass]

I dont have pictures yet but im getting my 3rd tractor soon. Its a JohnDeere 4100 with a FEL and rototiller. It is FREE! It was in the neighbors mancave that burned down so I shall have a project. You may be wondering and yes, he had insurance and is getting a Kubota with a FEL and Backhoe next week to replace his John Deere. Im just so excited to start working on the Deere. In fact, I was the last one to drive it before it was in the fire. I plan to be the first to drive it after the rebuild. I dont know when i'll get it since the fire is still under investigation but when he starts to clear thr place out, The Deere is goin up to my place as my highschool project tractor. Pictures will come when he starts to clean up the place. Wish me luck!

3720.....I think that is just great. It will be a lot of work but I am sure....you will enjoy it.

Good luck and post some pictures.

 

[mcd176]

Congrats on your new project!

 

[Johndeere3720]

I havent got the 4100 yet but i have got to play on the neighbors replacement tractor. It is a BX24. I graded the neighborhood road and did some clearing in the woods at home. I guess that Ford is still investigating to see if his F350 started the fire. Now he is happy that there was a fire as it gave him $1300 less in monthly payments. He got a new motor home, suv, tractor, and quads already. These are all payed for. If it was the truck that strted the fire, he can get a new 2010 F350 with all the bells and whistles and that will be payed for too.Things are looking up *** him now. If the truck started the fire, the only payment he will have left in 6 months will be his house. God has blessed him. It does feels weird wearing a JohnDeere hat while driving a Kubota.